Abstract:Lab-made biosilica (SiO2) nanoparticles were obtained from waste biomass (rice husks) and used as eco-friendly fillers in the production of nickel matrix composite films via the co-electrodeposition technique. The produced biosilica nanoparticles were characterized using XRD, FTIR, and FE-SEM/EDS. Amorphous nano-sized biosilica particles with a high SiO2 content were obtained. Various current regimes of electrodeposition, such as direct current (DC), pulsating current (PC), and reversing current (RC) regimes, were applied for the fabrication of Ni and Ni/SiO2 films from a sulfamate electrolyte. Ni films electrodeposited with or without 1.0 wt.% biosilica nanoparticles in the electrolyte were characterized using FE-SEM/EDS (morphology/elemental analyses, roundness), AFM (roughness), Vickers microindentation (microhardness), and sheet resistance. Due to the incorporation of SiO2 nanoparticles, the Ni/SiO2 films were coarser than those obtained from the pure sulfamate electrolyte. The addition of SiO2 to the sulfamate electrolyte also caused an increase in the roughness and electrical conductivity of the Ni films. The surface roughness values of the Ni/SiO2 films were approximately 44.0%, 48.8%, and 68.3% larger than those obtained for the pure Ni films produced using the DC, PC, and RC regimes, respectively. The microhardness of the Ni and Ni/SiO2 films was assessed using the Chen-Gao (C-G) composite hardness model, and it was shown that the obtained Ni/SiO2 films had a higher hardness than the pure Ni films. Depending on the applied electrodeposition regime, the hardness of the Ni films increased from 29.1% for the Ni/SiO2 films obtained using the PC regime to 95.5% for those obtained using the RC regime, reaching the maximal value of 6.880 GPa for the Ni/SiO2 films produced using the RC regime.

A Silica Co-Electrodeposition Route To Highly Active Ni-Based Film Electrodes

3D self-supporting porous NiFe2O4-Ni3P-Fe2P film with sea urchin-like structure for efficient oxygen evolution

CoO/NiSi(x) Core-Shell Nanowire Arrays As Lithium-Ion Anodes with High Rate Capabilities.

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

Controlled Electrodeposition Synthesis Of Co-Ni-P Film As A Flexible And Inexpensive Electrode For Efficient Overall Water Splitting

Facile Electrodeposition of Amorphous Nickel/Nickel Sulfide Composite Films for High-Efficiency Hydrogen Evolution Reaction

Electrochemical fabrication and pseudocapacitive performance of a porous nanostructured nickel-based complex film electrode

Bifunctional NiCoP/NiCo Electrocatalysts on Nickel Foam for Overall Water Spillting

Low temperature in situ immobilization of nanoscale fcc and hcp polymorphic nickel particles in polymer-derived Si-C-O-N(H) to promote electrocatalytic water oxidation in alkaline media

A Novel Surface Modification of Silicon Nanowires by Polydopamine to Prepare SiNWs/NC@NiO Electrode for High-Performance Supercapacitor

Influence of SiO2 Nanoparticles Extracted from Biomass on the Properties of Electrodeposited Ni Matrix Composite Films on Si(100) Substrate

Facile electrodeposition synthesis and super performance of nano-porous Ni-Fe-Cu-Co-W high entropy alloy electrocatalyst

Synergistic Coupling of Ni Nanoparticles with Ni3 C Nanosheets for Highly Efficient Overall Water Splitting

A novel preparation method for NiCo<sub>2</sub>O<sub>4</sub> electrodes stacked with hexagonal nanosheets for water electrolysis

Electrochemical Fabrication of a Porous Nanostructured Nickel Hydroxide Film Electrode with Superior Pseudocapacitive Performance

Three-dimensional Well-Mixed / Highly-Densed NiS-CoS Nanorod Arrays: an Efficient and Stable Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution Reactions

Controlled Direct Electrodeposition of Crystalline NiFe/amorphous NiFe-(oxy)hydroxide on NiMo Alloy As a Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Synthesis of NiCo2S4-based nanostructured electrodes supported on nickel foams with superior electrochemical performance

Fabrication of a Hierarchical Ni(OH)2 @ni3 S2 /ni Foam Electrode from a Prussian Blue Analogue-Based Composite with Enhanced Electrochemical Capacitive and Electrocatalytic Properties.

Advancing electrochemical activity: Insights from Li doped Ni-MOF synthesis and performance