Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Enhanced Rate Capabilities Of Co3o4/Carbon Nanotube Anodes For Lithium Ion Battery Applications

Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries

Cobalt Nanoparticles Chemically Bonded to Porous Carbon Nanosheets: A Stable High-Capacity Anode for Fast-Charging Lithium-Ion Batteries

Facile Scalable Synthesis of Co3O4/carbon Nanotube Hybrids As Superior Anode Materials for Lithium-Ion Batteries

Co3O4 nanosheets anchored on C/Cu porous microspheres as high-performance anode materials for lithium-ion battery

High performance of Co 3 O 4 @carbon composites as anodes for Lithium‐ion batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

Ionic Liquid Derived Co3O4/Nitrogen Doped Carbon Composite As Anode of Lithium Ion Batteries with Enhanced Rate Performance and Cycle Stability

In-situ encapsulation of core-shell structured Co@Co3O4@CNOs as anode for lithium-ion batteries with high rate performance

Ni x Mn y Co z O Nanowire/CNT Composite Microspheres with 3D Interconnected Conductive Network Structure via Spray-Drying Method: A High-Capacity and Long-Cycle-Life Anode Material for Lithium-Ion Batteries.

Micro-/Nanostructured Co3O4 Anode with Enhanced Rate Capability for Lithium-Ion Batteries

Co3O4-coated TiO2 Nanotube Composites Synthesized Through Photo-Deposition Strategy with Enhanced Performance for Lithium-Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

A g-C3N4 self-templated preparation of N-doped carbon nanosheets@Co-Co3O4/Carbon nanotubes as high-rate lithium-ion batteries' anode materials

Nanoporous Carbon as Anode Material of High Rate Capability for Lithium Ion Batteries

Cobalt-promoted Fabrication of 3D Carbon with a Nanotube-Sheet Mutual Support Structure: Scalable Preparation of a High-Performance Anode Material for Li-ion Batteries

Zn-substituted CoCO3 Embedded in Carbon Nanotubes Network As High Performance Anode for Lithium-Ion Batteries

Design and Fabrication of Co3V2O8nanotubes by Electrospinning As a High-Performance Anode for Lithium-Ion Batteries

"Electron-Sharing" Mechanism Promotes Co@Co3O4/CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery.