Influence of Intake Backflow on HCCI Auto-Ignition Timing

Hua Zhao,Lianfang Zhang,Hui Xie,Liyan Xie,Xinyan Wang,Tao Chen
DOI: https://doi.org/10.11715/rskxjs201303003
2013-01-01
Abstract:In order to control HCCI auto-ignition timing, three-dimensional numerical simulation was performed to investigate the influence of the intake backflow caused by different intake valve opening timings on combustion. The results show that intake backflow ratio increases as intake valve opening timing advances, which plays two roles. One is that the in-cylinder average temperature changes due to heat losses, the other is that the in-cylinder temperature and residual gas fraction(RGF) distribution is changed by changing the mixing process of fresh and exhaust gas. When the intake backflow ratio is lower than 20%, the decrease of in-cylinder average temperature delays the ignition timing. When the intake backflow ratio exceeds 20%, the inhomogeneity increases of temperature and RGF, which makes the ignition timing advance. The intake backflow also decreases the overlapped area of high temperature zone and high RGF zone, resulting in a high temperature and relatively low RGF zone, which is beneficial to autoignition. The formation and development of this zone promotes the generation of auto-ignition sites, advancing the auto-ignition timing.
What problem does this paper attempt to address?