Abstract:Based on the embedded atom method (EAM) and molecular dynamics (MD) method, the mono-crystalline copper with different defects is investigated through tension and nanoindentation simulation. The single-crystal copper nanowire with surface defects is firstly studied through tension. For validation, the tension simulations for nanowire without defect are carried out under different temperatures and strain rates. The defects on nanowires are then systematically studied in considering different defects orientation distribution. It is found that the Young’s modulus is insensitive of surface defects and centro-plane defects. However, the yield strength and yield point show a significant decrease due to the different defects. Specially, the 〖45〗^° defect in surface and in (200) plane exerts the biggest influence to the yield strength, about 34.20% and 51.45% decrease are observed, respectively. Different defects are observed to serve as a dislocation source and different necking positions of the nanowires during tension are found. During nanoindentation simulation, dislocation is found nucleating below the contact area, but no obvious dislocation is generated around the nano-cavity. Comparing with the perfect substrate during nanoindentation, the substrate with nano-cavities emerged less dislocations, it is supposed that the nano-cavity absorbed part of the indent energy, and less plastic deformation happened in the defected substrate.

The deformation behaviors of silver nanowires including 3D defects under tension

Atomistic Exploration of Deformation Properties of Copper Nanowires with Pre-Existing Defects

Bending Properties of Ag Nanowires with Pre-Existing Surface Defects

Molecular Dynamics Study Of Dynamic Buckling Properties Of Nanowires With Defects

Numerical Exploration of Plastic Deformation Mechanisms of Copper Nanowires with Surface Defects

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

Numerical investigation of mechanical properties of nanowires: a review

Exploration of the Defect’s Effect on the Mechanical Properties of Different Orientated Nanowires

Advanced Numerical Characterization of Mono-Crystalline Copper with Defects

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

MD Investigations for Mechanical Properties of Copper Nanowires with and Without Surface Defects

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

Void-assisted Plasticity in Ag Nanowires with a Single Twin Structure.

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

Tensile Properties of Si Nanowires with Faulted Stacking Layers

Deformation of Copper Nanowire under Coupled Tension–Torsion Loading

The Deformation Behaviour of Silver Nanowires with Kinked Twin Boundaries under Tensile Loading

A study on the effects of twin boundaries and surface morphology on deformation behaviours of silver nanowires

Investigation on the Mechanical Behavior of Fivefold Twinned Silver Nanowires

Investigation on the Mechanical Behaviour of Faceted Ag Nanowires

The Deformation Mechanism in Cold-Welded Gold Nanowires Due to Dislocation Emission