Abstract:We report a self-terminated electroless deposition method to prepare surfactant-free and monodispersed Pt nano-particle (NP)-modified carbon fiber microelectrodes (Pt NP/CFEs) for electrochemical detection of hydrogen peroxide (H2O2) released from living cells. The surfactant-free and monodispersed Pt NPs with a uniform size of 65 nm are spontaneously deposited on a CFE surface by immersing an exposed carbon fiber (CF) of CFE in the PtCl42- solution, in which an exposed CF can be used as the reducing agent and stabilizer. A self-terminated electroless deposition method is demonstrated, in which the density and size of Pt NPs on a CFE surface do not increase when the reaction time increases from 20 to 60 min. The self-terminated electroless deposition process not only can effectively avoid any manual electrode modification and thus largely minimize person-to-person and electrode-to-electrode deviations but also can avoid the use of any extra reductant or surfactant in the fabrication process. Therefore, Pt NPs/CFEs, with good reproducibility and sensitivity, not only exhibit high electrocatalytic activity toward the oxidation of H2O2 but also maintain the spatial resolution of CFEs. Moreover, Pt NPs/CFEs can detect H2O2 with a wide linear range of 0.5-80 mu M and a low detection limit of 0.17 mu M and then can be successfully applied in the monitoring of H2O2 released from RAW 264.7 cells. The self-terminated electroless deposition method can also be extended to selectively prepare other metal NP-modified CFEs, such as Au NPs/CFEs or Ag NPs/CFEs, by choosing the metal ions with higher reduction potential as precursors. This work provides a simple, straightforward, and general method for the preparation of small, surfactant-free, and monodispersed metal NP-modified CFEs with high sensitivity, reproducibility, and spatial resolution.

Preparation of Electrochemical Sensor Based on Morphology-Controlled Platinum Nanoparticles for Determination of Chemical Oxygen Demand

Electrodeposition of Monodispersed Cu Nanoparticles on Poly-P-Aminobenzene Sulfonic Acid Functionalized Glassy Carbon Electrode and the Electrocatalytic Reduction Toward H2o2

Determination of Chemical Oxygen Demand Based on Photoelectrocatalysis of Nanoporous Tio2 Electrodes

Preparation of a nanometer-sized platinum electrode and its electrochemical behavior

A Nickel Nanoparticle/nafion-Graphene Oxide Modified Screen-Printed Electrode for Amperometric Determination of Chemical Oxygen Demand

Rapid Potentiometric Detection of Chemical Oxygen Demand Using a Portable Self-Powered Sensor Chip

A Point Of Care Testing System For Chemical Oxygen Demand Based On Graphene Oxide. Nickel Nanoparticles Modified Electrode

Homojunction-Incorporated Oxygen Vacancy Functionalized Spherical TiO 2 Nanocrystals for the Electrochemical Detection of Chemical Oxygen Demand

Nanoporous Carbon Nanofibers Decorated with Platinum Nanoparticles for Non-Enzymatic Electrochemical Sensing of H2O2

Portable Photoelectrochromic Visualization Sensor for Detection of Chemical Oxygen Demand

Nanocomposites of Palladium Nanoparticle-Loaded Mesoporous Carbon Nanospheres for the Electrochemical Determination of Hydrogen Peroxide.

Nanoporous platinum-copper flowers for non-enzymatic sensitive detection of hydrogen peroxide and glucose at near-neutral pH values

Electrodeposition Of Pd-Pt Nanocomposites On Porous Gan For Electrochemical Nitrite Sensing

Self-Terminated Electroless Deposition of Surfactant-Free and Monodispersed Pt Nanoparticles on Carbon Fiber Microelectrodes for Sensitive Detection of H<sub>2</sub>O<sub>2</sub> Released from Living Cells

A Nonenzymatic Electrochemical Nitrite Sensor Based on Pt Nanoparticles Loaded Ni(OH)2/multi-walled Carbon Nanotubes Nanocomposites

WO₃/W nanopores sensor for chemical oxygen demand (COD) determination under visible light.

Novel Approach for the Decoration of Magnetic Carbon Nanospheres with Platinum Nanoparticles and Their Enhanced Peroxidase Activity for the Colorimetric Detection of H 2 O 2

WO3/W Nanopores Sensor for Chemical Oxygen Demand (COD) Determination under Visible Light

Assessment of A Cod Analytical Method Based on the Photoelectrocatalysis of A Tio2 Nanotube Array Sensor

A Highly Sensitive Electrochemical Sensor for Cd(II) Based on Protic Salt Derived Nitrogen and Sulfur Co-Doped Porous Carbon.

A Novel Electrochemical Ammonia–nitrogen Sensor Based on Carbon Cloth-Supported Hierarchical Pt Nanosheets-Ni(oh)2 Nanosheets Nanocomposites