Abstract:The ability to amplify optical signals is of pivotal importance across science and technology typically using rare-earth-doped fibres or gain media based on III–V semiconductors. A different physical process to amplify optical signals is to use the Kerr nonlinearity of optical fibres through parametric interactions 1,2 . Pioneering work demonstrated continuous-wave net-gain travelling-wave parametric amplification in fibres 3 , enabling, for example, phase-sensitive (that is, noiseless) amplification 4 , link span increase 5 , signal regeneration and nonlinear phase noise mitigation 6 . Despite great progress 7,8,9,10,11,12,13,14,15 , all photonic integrated circuit-based demonstrations of net parametric gain have necessitated pulsed lasers, limiting their practical use. Until now, only bulk micromachined periodically poled lithium niobate (PPLN) waveguide chips have achieved continuous-wave gain 16,17 , yet their integration with silicon-wafer-based photonic circuits has not been shown. Here we demonstrate a photonic-integrated-circuit-based travelling-wave optical parametric amplifier with net signal gain in the continuous-wave regime. Using ultralow-loss, dispersion-engineered, metre-long, Si 3 N 4 photonic integrated circuits 18 on a silicon chip of dimensions 5 × 5 mm 2 , we achieve a continuous parametric gain of 12 dB that exceeds both the on-chip optical propagation loss and fibre–chip–fibre coupling losses in the telecommunication C band. Our work demonstrates the potential of photonic-integrated-circuit-based parametric amplifiers that have lithographically controlled gain spectrum, compact footprint, resilience to optical feedback and quantum-limited performance, and can operate in the wavelength ranges from visible to mid-infrared and outside conventional rare-earth amplification bands.

Optical parametric generation with two pairs of gain bands based on a photonic crystal fiber

Demonstration of Optical Parametric Gain Generation in the 1 Μm Regime Based on a Photonic Crystal Fiber Pumped by a Picosecond Mode-Locked Ytterbium-Doped Fiber Laser

Photonic Crystal Fiber Based Wavelength-Tunable Optical Parametric Amplifier and Picosecond Pulse Generation

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

Parametric Wavelength Conversion in Photonic Crystal Fibers

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

Mid-infrared optical parametric amplifier using silicon nanophotonic waveguides

Picosecond Photonic Crystal Fiber-Based Doubly Resonant Optical Parametric Oscillator

The Analysis and Optimization of Broadband Fiber Optical Parametric Amplifiers Pumped by Chirped Pulses

A CW Seeded Femtosecond Optical Parametric Amplifer

Photonic chip-based continuous-travelling-wave parametric amplifier

Quasi-static Optical Parametric Amplification

Experimental Realization of Broadband Parametric Generation in a Quasi-Periodically Poled LiTaO_3

Experimental demonstration on 400 nm-scale bandwidth optical parametric chirped-pulse amplification based on mixed cascaded crystals

A photonic integrated continuous-travelling-wave parametric amplifier

Broadband optical parametric amplification by two-dimensional semiconductors

Temperature- And Wavelength-Insensitive Parametric Amplification Enabled By Noncollinear Achromatic Phase-Matching

Femtosecond traveling-wave optical parametric amplifier with BBO

Widely Tunable All-Fiber Optical Parametric Oscillator Based on a Photonic Crystal Fiber Pumped by a Picosecond Ytterbium-Doped Fiber Laser.

Wide-band and Fast Wavelength-Swept Optical Parametric Oscillator with a Photonic Crystal Fiber Based on Dispersion Tuning Technology at 1 Μm

Direct ultrafast parametric amplification pumped by a picosecond thin-disk laser