Abstract:Vapor-feed microfluidic fuel cell (VF-MFC) has various advantages against the conventional liquid-feed microfluidic fuel cell, such as simpler fluidic management, higher fuel utilization, flow rate insensitiveness, and so on. To better understand the mechanisms behind its superiority and to further optimize its performance, a 3D isothermal numerical model has been developed in this work. The computational results agree very well with the previous and present experimental data, proving the validity of the current model for the VF-MFC simulation. Through this model, it is found that the dissolved fuel in the VF-MFC is well-controlled within a thin boundary layer nearby the anode catalyst surface, which can not only satisfy the demand of anode oxidation reaction but also greatly alleviate the wastage of fuel. In this manner, the VF-MFC can achieve satisfactory power output and high fuel utilization at the same time. In addition, the boundary layer effect on electrolyte flow rate can keep the fuel concentration in the thin layer relatively stable at different flow rates, which may be the reason behind the insensitiveness of VF-MFC performance to electrolyte flow rate. To further improve its power output and fuel efficiency, effects of the fuel evaporation area and the anode open ratio have also been thoroughly investigated with the present model. It is found that an evaporation-reaction area ratio of 11.1 is sufficient for the present VF-MFC, while a smaller fuel evaporation area can lead to improved fuel utilization at the expense of lower power output. To improve both the fuel utilization and power output, the electrode area towards the channel outlet is increased while keeping the vapor entrance area constant, i.e. the anode open ratio is reduced. By this strategy, the VF-MFC can achieve 48% higher power output and elevated fuel utilization from 27.5% to 41.8%, when an anode open ratio of 1:3 is adopted.

Theoretical Graetz–Damköhler Modeling of an Air-Breathing Microfluidic Fuel Cell

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Computational modeling studies on microfluidic fuel cell: A prospective review

Ensemble Engineering and Statistical Modeling for Parameter Calibration Towards Optimal Design of Microbial Fuel Cells

Pore-scale modeling of mass transport in the air-breathing cathode of membraneless microfluidic fuel cells

Numerical Investigation and Optimization of Vapor-Feed Microfluidic Fuel Cells with High Fuel Utilization

Two-phase mass transfer in a vapor-fed microfluidic fuel cell

Enabling high-concentrated fuel operation of fuel cells with microfluidic principles: A feasibility study

Computational modeling of a thread-based microfluidic fuel cell with carbon fiber electrodes

Modeling study of an air‐breathing micro direct methanol fuel cell with an extended anode catalyst region

A Two-Dimensional, Two-Phase Mass Transport Model for Microbial Fuel Cells

Modeling Validation and Simulation of an Anode Supported Sofc Including Mass and Heat Transport, Fluid Flow and Chemical Reactions

Non-Isothermal Modeling of A Small Passive Direct Methanol Fuel Cell in Vertical Operation with Anode Natural Convection Effect

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Micro Fuel Cell Cathode Modeling Based on Fluent

Modeling of water transport through the membrane electrode assembly for direct methanol fuel cells

A two-dimensional, two-phase mass transport model for liquid-feed DMFCs

Modeling Power Generation and Energy Efficiencies in Air-Cathode Microbial Fuel Cells Based on Freter Equations

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

Two-phase Modeling of Mass Transfer Characteristics of a Direct Methanol Fuel Cell