Abstract:Lithium titanate (Li4Ti5O12, LTO) is an important material to be used as an anode for LIBs (Li+ ion battery). LTO is a zero-strain material (i.e., no structural change occurs during Li insertion/extraction). Although LTO is a very safe material that can be used as an anode material in high and low temperature environment, its rate capability is compromised by its low electronic conductivity and poor Li+ diffusion coefficient. In the recent years, considerable research around the world has focused on improving LTO rate performance. Efforts to achieve better electrical conduction between LTO particles have included LTO particle size control, conductive-material surface coatings, and alien ion doping. However, in this study electrochemical properties were improved by changing the morphology of LTO. Based on traditional electrospinning technology, LTO fibers with a hollow structure were produced using a nested coaxial nozzle modified from the conventional spinning nozzle and coaxial cospinning with two different solutions. A comparison of this results with those of solid LTO prepared by traditional electrospinning technology demonstrates that hollow LTO is characterized by uniform particle size and no agglomeration, along with an obvious hollow structure, clear crystal lattice stripes, and good crystallization property. The specific surface of this hollow LTO is 1.3 times than its solid counterpart. This morphological change greatly improves the electrochemical performance of the material. Although the discharge specific capacities of both the solid and hollow LTO are close to the theoretical value for small ratios, the hollow LTO is superior to its solid counterpart at 20C. The discharge specific capacity of the hollow LTO can reach 130 mA·h·g-1 at 20C, and after 200 cycles, its capacity retention ratio remains at 98%, which suggests good stability. Cyclic voltammetry and AC impedance curves also show that the hollow structure reduces the degree of polarization and the electrochemical reaction impedance of LTO, which makes LTO more conducive to electrochemical reaction.

Multichannel hollow TiO2 nanofibers fabricated by single-nozzle electrospinning and their application for fast lithium storage

Multichannel Porous TiO 2 Hollow Nanofibers with Rich Oxygen Vacancies and High Grain Boundary Density Enabling Superior Sodium Storage Performance.

Electrospun Ti 2 Nb 10 O 29 Hollow Nanofibers As High-Performance Anode Materials for Lithium-Ion Batteries

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Highly uniform TiO2/SnO2/carbon hybrid nanofibers with greatly enhanced lithium storage performance

Fabrication of Hollow Lithium Titanate Material by Electrospinning

Self-Reconstructed Formation of a One-Dimensional Hierarchical Porous Nanostructure Assembled by Ultrathin TiO2 Nanobelts for Fast and Stable Lithium Storage.

Hollow TiO2–X Porous Microspheres Composed of Well-Crystalline Nanocrystals for High-Performance Lithium-Ion Batteries

Ultrathin N‐doped Carbon‐coated TiO2 Coaxial Nanofibers As Anodes for Lithium Ion Batteries

Nanoengineering to Achieve High Sodium Storage: A Case Study of Carbon Coated Hierarchical Nanoporous TiO2 Microfibers

Electrospinning-enabled SiO @TiO2/C fibers as anode materials for lithium-ion batteries

Electrospun TiO2 Nanofiber Electrode with Optimized Diameters for Lithium Ion Battery

Electrospun Li3.9Cr0.3Ti4.8O12 Nanofibers As Anode Material for High-Rate and Low-Temperature Lithium-Ion Batteries

Fabrication of Porous Carbon-Composite Nanofibers Via Electrospinning and Their Application in Ion Storage System

Controllable Synthesis of Mesostructures from TiO2 Hollow to Porous Nanospheres with Superior Rate Performance for Lithium Ion Batteries.

Encapsulating homogenous ultra-fine SnO2/TiO2 particles into carbon nanofibers through electrospinning as high-performance anodes for lithium-ion batteries

Electrospun LiMn1.5Ni0.5O4 Hollow Nanofibers As Advanced Cathodes for High Rate and Long Cycle Life Li-ion Batteries

Self-templating fabrication of Ti-doped SnO 2 @carbon nanotubes via electrospinning for high-performance lithium-ion batteries

Electrospun TiO2 Nanofibers Featuring Surface Oxygen Vacancies as a Multifunctional Interlayer for High-Performance Lithium-Sulfur Batteries in a Wide Temperature Range

Tin Nanoparticles Encapsulated in Porous Multichannel Carbon Microtubes: Preparation by Single-Nozzle Electrospinning and Application As Anode Material for High-Performance Li-based Batteries.

General Synthesis of Transition Metal Oxide Ultrafine Nanoparticles Embedded in Hierarchically Porous Carbon Nanofibers As Advanced Electrodes for Lithium Storage