Abstract:Solid and microcellular poly(L-lactide)/poly(butylene adipate-co-terephthalate) (PLLA/PBAT) blends with or without poly(D-lactide) (PDLA) were prepared via melt blending and batch foaming process with supercritical carbon dioxide, respectively. The introduction of PDLA on the rheological properties, crystallization behavior and dynamic mechanical properties of the PLLA matrix were investigated. The formed PLA stereocomplex between PLLA and PDLA enhanced the storage modulus and complex viscosity of PLLA/PBAT blends efficiently. Interestingly, the addition of 5 wt% or 10 wt% PDLA in the PLLA/PBAT blends was unfavorable for the PLLA crystallization behavior. The potential reason can be sc-PLA crystallites acting as the physical crosslinking points, which constrained the molecular mobility of the PLLA matrix and even blocked the nucleating effect of PBAT domains. Both the enhanced melt strength and decreased crystallinity of the PLLA matrix are favorable for the cell nucleation and growth and the gas adsorption, respectively. The designed partially foaming of PLLA/PBAT with or without PDLA was carried out to investigate the foaming mechanism. The final cell morphology of PLLA/PBAT foams exhibited typical open-cell structure mainly attributed to the soft immiscible PBAT phase as separated domains. With further addition of PDLA in the PLLA/PBAT blends, the microcellular morphology exhibited decreased average cell size and increased cell density. The sc-PLA crystallites networks in the PLLA matrix acted as cell nucleating agents, which meanwhile resisted the force of cell growth and then prevented the cell collapse.

Thermal, mechanical, and rheological properties of polylactide/poly(1,2- propylene glycol adipate)

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Effects of preparation and properties of poly(lactic acid) /poly(1,2-propylene glycol adipate) blends

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Introduction of Stereocomplex Crystallites of PLA for the Solid and Microcellular Poly(lactide)/poly(butylene Adipate-Co-terephthalate) Blends

Compatibility, Steady and Dynamic Rheological Behaviors of Polylactide/Poly(Ethylene Glycol) Blends

Rheological, Thermal and Mechanical Properties of Biodegradable Poly(Propylene Carbonate)/Polylactide/Poly(1,2-Propylene Glycol Adipate) Blown Films

Effect of Poly(Acrylic Acid) on the Rheological and Thermal Properties of Poly(Lactic Acid)

The Simultaneous Introduction of Low and High Molecular Weight of Biodegradable Poly(diethylene Glycol Adipate)s to Plasticize and Toughen Polylactide

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Mechanical, Thermal and Rheological Properties and Morphology of Poly (lactic Acid)/Poly (propylene Carbonate) Blends Prepared by Vane Extruder

Ductile polylactic acid/poly(butylene diglycolate): structures and properties

Thermal, mechanical, and rheological properties of plasticized poly(L‐lactic acid)

Poly(Lactic Acid)/Polypropylene and Compatibilized Poly(Lactic Acid)/Polypropylene Blends Prepared by A Vane Extruder: Analysis of the Mechanical Properties, Morphology and Thermal Behavior

Thermal Properties of Poly(Lactic Acid) Modified Poly(3-Hydroxybutyrate-co-4-Hydroxbutyrate)

Thermal and Mechanical Properties of Polylactide Toughened with A Butyl Acrylate-Ethyl Acrylate-Glycidyl Methacrylate Copolymer

Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ε-caprolactone) blends

Dynamic Rheological Behavior and Morphology of Polylactide/poly(butylenes Adipate‐co‐terephthalate) Blends with Various Composition Ratios

Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid)

Preparation, Mechanical and Thermal Properties of PLA/PBAT/EGMA Blends