Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Enhanced Charge Transportation in a Polypyrrole Counter Electrode Via Incorporation of Reduced Graphene Oxide Sheets for Dye-Sensitized Solar Cells.

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Facile Synthesis of Hierarchical Nanostructured Polypyrrole and Its Application in the Counter Electrode of Dye-Sensitized Solar Cells

Economically Synthesized NiCo2S4/reduced Graphene Oxide Composite As Efficient Counter Electrode in Dye-Sensitized Solar Cell

Reduced Graphene Oxide-Ta3n5 Composite: A Potential Cathode For Efficient Co(Bpy)(3)(3+/2+) Mediated Dye-Sensitized Solar Cells

Facile construction of a polypyrrole-cobalt sulfide counter electrode for low-cost dye-sensitized solar cells

Reduced Graphene Oxide–ta3n5 Composite: a Potential Cathode for Efficient Co(bpy)33+/2+ Mediated Dye-Sensitized Solar Cells

Mn3O4/graphene composite as counter electrode in dye-sensitized solar cells

Reduced Graphene Oxide–TaON Composite As a High-Performance Counter Electrode for Co(bpy)33+/2+-Mediated Dye-Sensitized Solar Cells

Electro-polymerization of Polypyrrole/multi-Wall Carbon Nanotube Counter Electrodes for Use in Platinum-Free Dye-Sensitized Solar Cells

Functionalized Reduced Graphene Oxide Loaded Aligned Carbon Nanotube Layer Used As Counter Electrode for Dye-Sensitized Solar Cells.

High Catalytic Activity of W18O49 Nanowire-Reduced Graphite Oxide Composite Counter Electrode for Dye-Sensitized Solar Cells

Reduced graphene oxide-TaON composite as a high-performance counter electrode for Co(bpy)3(3+/2+)-mediated dye-sensitized solar cells.

CuNi2S4-reduced graphene oxide composites as an efficient counter electrode for high performance dye-sensitized solar cells

Electrochemically Synthesized Polypyrrole/Graphene Composite Film for Lithium Batteries

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

FeS2/FeCoS2 nanoparticles/reduced graphene oxide interfacial composite structure as highly reactive counter electrodes in dye-sensitized solar cells

Synthesis of an Efficient Counter Electrode Material for Dye-Sensitized Solar Cells by Pyrolysis of Melamine and Graphene Oxide

Solution‐Processed Graphene Composite Films as Freestanding Platinum‐Free Counter Electrodes for Bendable Dye Sensitized Solar Cells