Abstract:The relatively low specific capacitance of flexible carbons hinders their practical application for fabricating high-performance flexible supercapacitors. In this work, a surface engineering method is proposed to boost the supercapacitive performance of the flexible carbon. In this method, a flexible carbon was fabricated from carbon felt via co-activation with potassium argininate and potassium hydroxide (KOH) as activators, and the resulting material is abbreviated as AKCF. Unlike traditional KOH activation processes, the addition of potassium argininate can produce a micro-graphitized carbon layer to be the outer layer of AKCF fibers for achieving better electronic transfer. Due to the improved conductivity and lower charge transfer resistance endowed by a thin micro-graphitized carbon layer, the capacitance of the AKCF-0.1 (0.1 M arginine was used) electrode obtained by the co-activation process is elevated to a 1.8-fold higher value of 403 C.g(-1) (2583 mC.cmz) relative to the AKCF-0 (0 M arginine was used) electrode prepared by KOH activation alone (222 C.g(-1) or 1369 mC.cmz). Moreover, this AKCF-0.1 electrode also displays satisfactory rate capability (66% capacitance retention after a 20-fold current increase) and highly stable cycling performance (no capacitance decline after 20,000 cycles). In addition, the asymmetric supercapacitors constructed with this AKCF-0.1 electrode as the flexible negative electrode expresses high energy densities of 68.4 Wh.kg(-1) and 0.139 mWh.cm(-2) in aqueous and gel electrolytes, respectively. (C) 2021 Elsevier Inc. All rights reserved.

Preparation and One-Step Activation of Microporous Carbon Nanofibers for Use As Supercapacitor Electrodes

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

Preparation and Electrochemical Properties of PF-based Activated Carbon

Preparation and Electrochemical Characteristics of Electrospun Water-Soluble Resorcinol/Phenol-Formaldehyde Resin-Based Carbon Nanofibers

Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors

Water bamboo-derived porous carbons as electrode materials for supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Electrospun activated carbon nanofibers for supercapacitor electrodes

Mesoporous Carbon Nanofibers for Supercapacitor Application

Improving Supercapacitance of Electrospun Carbon Nanofibers through Increasing Micropores and Microporous Surface Area

One-step Preparation of Nitrogen-Doped Porous Carbons with Excellent Properties for High-Performance Supercapacitors

Preparation of Advanced Multi-Porous Carbon Nanofibers for High-Performance Capacitive Electrodes in Supercapacitors

Crucial structural parameters affecting electrochemical properties of activated electrospun carbon fibers as solid-state supercapacitor electrodes

Preparation and capacitive performance of modified carbon black-doped porous carbon nanofibers

Bioenzyme Activation Preparation of Fe3O4/carbon Nanofibers As Supercapacitor Electrode Materials

High-surface-area and high-nitrogen-content carbon microspheres prepared by a pre-oxidation and mild KOH activation for superior supercapacitor

Nitrogen-Doped Porous Carbons Through Koh Activation with Superior Performance in Supercapacitors

Synthesis of Nitrogen-Doped Electrospun Carbon Nanofibers with Superior Performance As Efficient Supercapacitor Electrodes in Alkaline Solution

Resorcinol-formaldehyde based porous carbon as an electrode material for supercapacitors

Single Layers of MoS2/Graphene Nanosheets Embedded in Activated Carbon Nanofibers for High-Performance Supercapacitor

Coconut-Shell-Based Porous Carbons with A Tunable Micro/Mesopore Ratio for High-Performance Supercapacitors