Abstract:The traditional dielectric barrier discharge reactors with metal-grounded electrodes have the disadvantages of electrode ablation, short lifetime and poor stability, which limit the practical application of nonthermal plasma de-NO x technology. A coaxial cylindrical dielectric barrier discharge reactor with the NaCl solution-grounded electrode was constructed. The effects of simulated exhaust gas flow rate, O 2 concentration, NO concentration and NO 2 concentration on the de-NO x performance were studied. The mean electron energy of the NO x collision process was calculated. The reaction rate and energy loss fraction of the dissociation reactions of N 2 and O 2 were elaborated. The results show that the specific energy input for de-NO x gradually decreases with the exhaust gas flow rate. The NO x transformation trend with the increasing O 2 concentration is shown as efficient removal mode (de-NO x efficiency > 82%) → inefficient removal mode (de-NO x efficiency < 50%) → NO x growth mode. The N 2 dissociation reaction rate is greater than the O 2 dissociation reaction rate at oxygen-poor condition. The energy loss fractions of N 2 dissociation reaction can reach up to 8.5%. The energy consumption of removing NO per unit volume gradually decreases with the initial NO concentration. The specific energy required for 900 ppm NO is 1.8 times lower than the theoretical value. In addition, the reactor with liquid-grounded electrode shows excellent performance of de-NO x efficiency and energy consumption. This work provides support for advancing the application of liquid-electrode reactors.

Research progress on electro-assisted catalysis for DeNO

The development of Fe2O3-based catalysts used for the selective catalytic reduction of NOx with NH3: A review

An enhanced plasma-catalytic method for DeNOx in simulated flue gas at room temperature

Progress in the catalysts for selective catalytic reduction of NOx by hydrogen under excess oxygen

Probe on the Mechanism of Flue Gas DeNOx by Corona Discharge

Nitrogen Oxides Removal and Mechanism Research for Dielectric Barrier Discharge with NaCl Solution Grounded Electrode

Experimental and Modeling Study on the Mechanism and Sensitive Parameters of the Thermal DeNOx Process

Recent enlightenments and prospects in engineering first-row transition metal-based catalysts for electrocatalytic NOx− reduction to ammonia

In‐situ characterization technologies for electrocatalytic reduction nitrate to ammonia on copper‐based catalysts

Cold plasma catalytic reaction

Research progress on the regeneration of SCR catalysts for flue gas denitrification

Role of Interfacial Water Structure in the Electroreduction of NO over Cu2O

Mechanism of N2O formation in catalytic aftertreatment systems of ammonia/hydrogen-fuelled engines

Experimental and Theoretical Investigation of Mesoporous MnO2 Nanosheets with Oxygen Vacancies for High-Efficiency Catalytic DeNO(x)

Characteristics of emissive spectrum and the removal of nitric oxide in N2/02/NO plasma with argon additive

Electrochemical Nitrate Reduction to Ammonia – Recent Progress

Photocatalytic NO removal: complete oxidation and reduction reaction for by-product inhibition and end-product recovery

Unveiling Cutting‐Edge Developments in Electrocatalytic Nitrate‐to‐Ammonia Conversion

Research on the National Standards of Test Methods for De-NOx Catalytic Performance

Dual-course Dielectric Barrier Discharge with a Novel Hollow Micro-Holes Electrode to Efficiently Mitigate NOx

Advances in designing efficient electrocatalysts for nitrate reduction from a theoretical perspective