Abstract:The current collector typically plays a critical role in Li nucleation/growth and Li‐ion flux distribution. This work introduces a hybrid SiO2‐Cu2O lithiophilic film designed to coat a 3D copper foam current collector. This composite current collector facilitates dense deposition of Li metal while ensuring a stable interface for the anode by exhibiting high Li+ affinity and selectivity toward electrolyte composition. Lithium (Li) metal batteries have attracted considerable research attention due to their exceptionally high theoretical capacity. However, the commercialization of Li metal batteries faces challenges, primarily attributed to uncontrolled growth of Li dendrites, which raises safety concerns and lowers coulombic efficiency. To mitigate Li dendrites growth and attain dense Li deposition, the hybrid SiO2‐Cu2O lithiophilic film applied to a 3D copper foam current collector is developed to regulate the interfacial properties for achieving even and dense Li deposition. The SiO2‐Cu2O possesses strong Li+ trapping capability through strong lithiophilicity from Cu2O. Additionally, the SiO2‐Cu2O enables uniform ion diffusion through the domain‐limiting effect of the holes in the SiO2 layer, inducing an even and dense Li plating/stripping behavior at a large capacity. Furthermore, the SiO2 layer promotes the formation of an initial high inorganic content Solid Electrolyte Interphase (SEI) through selective preferential binding with anion and solvent molecules. When the SiO2‐Cu2O@Li anode is coupled with a LiFePO4 (LFP) cathode, the resulting full cell exhibits superior cycling stability and rate performance. These results provide a facile approach to construct a lithiophilic current collector for practical Li metal anodes.

Corrosion resistance of nickel foam modified with electroless Ni-P alloy as positive current collector in a lithium ion battery

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Bifunctional 3D Graphite@Ni-Fe foam negative current collector toward stable liquid metal battery

Ag coated 3D-Cu foam as a lithiophilic current collector for enabling Li<sub>2</sub>S-based anode-free batteries

Corrosion Resistance Mechanism of Chromate Conversion Coated Aluminium Current Collector in Lithium-Ion Batteries

Constructing Porous Nickel-Zinc Alloy Layer on Nickel Foam for Dendritic-Free Lithium Metal Anode

Three-Dimensional Nickel Foam-Based Lithiophilic LPP-Ni3S2@Ni Current Collector for Dendrite-Free Lithium Anode

Electrochemical synthesis of SnCo alloy shells on orderly rod-shaped Cu current collectors as anode materials for lithium-ion batteries with enhanced performance

Protecting Al Foils for High-Voltage Lithium-Ion Chemistries

Surface Engineering of Commercial Ni Foams for Stable Li Metal Anodes

Three-dimensional flower-like NiO on Cu foam as a lithiophilic current collector for high-performance lithium metal batteries

Constructing nanoporous Ni foam current collectors for stable lithium metal anodes

Stable Lithium Metal Batteries Enabled by Lithiophilic Core‐Shell Nanowires on Copper Foam

In situ constructing lithiophilic and Ion/Electron Dual-Regulated current collector for highly stable lithium metal batteries

Phytic-Acid-Modified Copper Foil as a Current Collector for Lithium-Ion Batteries

Lithiophilic and Anticorrosive Cu Current Collector via Dual-Bonded Porous Polymer Coating for Stable Lithium-Metal Batteries

Rolled electrodeposited copper foil with modified surface morphology as anode current collector for high corrosion resistance in lithium-ion battery electrolyte

Application of electrodeposited Cu-metal nanoflake structures as 3D current collector in lithium-metal batteries

Understanding corrosion behavior of aluminum current collector in LiFSI electrolyte

Three-dimensional copper current collector as an anode for rechargeable anode-less lithium-ion batteries

Revisiting the Corrosion of the Aluminum Current Collector in Lithium-Ion Batteries