Abstract:LNG floating production storage and offloading (FPSO) unit is a new type of floating production unit developed for offshore natural gas fields. It performs the functions of natural gas extraction, pretreatment, liquefaction, and storage. In this study, the heat transfer characteristics of a spiral-wound heat exchanger were studied using numerical simulations, which provides a basis for equipment selection and structural optimization of spiral-wound heat exchangers. The main research contents and conclusions are as follows. Under land-based simulation conditions, the heat transfer coefficient of the shell side of the spiral-wound heat exchanger decreases with an increase in the winding angle of the heat exchange tube, decreases with an increase in the spacing of the heat exchange tube, and increases with an increase in the outer diameter of the heat exchange tube. When the winding angle increased from 5° to 8°, the heat transfer coefficient decreased by 6.70%. The heat transfer coefficient of the shell side decreased by 13.21% when the heat exchange tube spacing increased from 14 to 17 mm. The heat transfer coefficient of the shell side increased by 22.89% when the outer diameter of the heat exchange tube increased from 9 to 12 mm. When the sloshing angle is constant, the heat transfer coefficient of the spiral-wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient decreases as the sloshing angle increases. When the sloshing angle was less than 3°, the sloshing promoted heat transfer on the shell side. When the sloshing angle was higher than 7°, the heat transfer effect of the shell side deteriorated considerably, which weakened the heat transfer performance of the heat exchanger. When the sloshing period is constant, the heat transfer coefficient of the wound heat exchanger decreases with an increase in the winding angle and spacing of the heat exchange tubes, and increases with an increase in the outer diameter of the heat exchange tubes. When the structural parameters of the heat exchanger are constant, the heat transfer coefficient increases with sloshing period. When the sloshing period was greater than 15 s, the influence of sloshing on the heat transfer on the shell side of the heat exchanger was relatively weak.

Experimental and Numerical Investigation on Shell-side Performance of Multilayer Spiral-Wound Heat Exchangers

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Numerical Simulation of Mass and Heat Transfer in Detachable Spiral Heat Exchanger

Numerical study on flow and heat transfer performance of a spiral-wound heat exchanger for natural gas

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Numerical Simulations of the Shell-Side Flow Field in Modular Helical-Coiled Heat Exchangers

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube

Research of Heat Transfer Characteristics of Supercritical CO2 in Spiral Tube Heat Exchangers

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Research on shell-side heat and mass transfer with multi-component in LNG spiral-wound heat exchanger under sloshing conditions

Numerical study on the effect of surface wettability on the falling film flow characteristics of the spiral wound tube heat exchanger

Numerical simulation and structure optimization of spiral wound heat exchanger with novel spacing bars

Numerical study on the flow characteristic of shell-side film flow of floating LNG spiral wound heat exchanger

Numerical and empirical simulation of fluid flow in a spiral plate heat exchanger with Nusselt number correlation development

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Numerical simulation of heat transfer performance of spiral wound heat exchanger under sloshing condition

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Shell Side Single-Phase Experimental Heat Transfer Analysis of a Vertically Oriented Single Segmental Baffle Bundle with Dimpled Tubes