Abstract:Due to the negative impact of nitrate and nitrite on human health, their presence exceeding acceptable levels is not desired in foodstuffs. Thus, nitrite determination at low concentrations is a major challenge in electroanalytical chemistry, which can be achieved by fast, cheap, and safe electrochemical sensors. In this work, the working electrode (Au) was functionalized with p-aminothiophenol (p-ATP) and modified with gold nanoparticles (Au-NPs) to manufacture the final (Au/p-ATP-Aunano) electrode in a two-step procedure. In the first step, p-ATP was electropolymerized on the electrode surface to obtain a polyaminothiophenol (PATP) coating. In the second step, Au/p-ATP-Aunano working electrode was prepared by coating the surface with the use of HAuCl₄ solution and cyclic voltammetry. Determination of aqueous nitrite samples was performed with the proposed electrode (Au/p-ATP-Aunano) using square wave voltammetry (SWV) in pH 4 buffer medium. Characteristic peak potential of nitrite samples was 0.76 V, and linear calibration curves of current intensity versus concentration was linear in the range of 0.5-50 mg·L(-1) nitrite with a limit of detection (LOD) of 0.12 mg·L(-1). Alternatively, nitrite in sausage samples could be colorimetrically determined with high sensitivity by means of p-ATP‒modified gold nanoparticles (AuNPs) and naphthylethylene diamine as coupling agents for azo-dye formation due to enhanced charge-transfer interactions with the AuNPs surface. The slopes of the calibration lines in pure NO₂(-) solution and in sausage sample solution, to which different concentrations of NO₂(-) standards were added, were not significantly different from each other, confirming the robustness and interference tolerance of the method. The proposed voltammetric sensing method was validated against the colorimetric nanosensing method in sausage samples.

Construction of A Carbon Paste Electrode Based on Ionic Liquid for Trace Electrochemical Detection of Nitrite in Food Samples

An Amperometric Sensor Based on Ionic Liquid and Carbon Nanotube Modified Composite Electrode for the Determination of Nitrite in Milk

Detection of Nitrite Based on Ni/Ag/MWNTs Modified Electrode

Sensitive electrochemical sensor based on nickel/PDDA/reduced graphene oxide modified screen-printed carbon electrode for nitrite detection

Electrochemical Sensor Based on Iron(II) Phthalocyanine and Gold Nanoparticles for Nitrite Detection in Meat Products

Facile fabrication of composite film modified electrodes based on vanadium-substituted tungstophosphate with Fe3O4@Au for electrochemical detection of sodium nitrite

Mesoporous CoOx/C Nanocomposites Functionalized Electrochemical Sensor for Rapid and Continuous Detection of Nitrite

Non-enzymatic electrochemical sensor based on AuNPs/Cu-N-C composite for efficient nitrite sensing in sausage sample

Electrochemically Reduced Graphene Oxide/gold Nanoparticles Composite Modified Screen-Printed Carbon Electrode for Effective Electrocatalytic Analysis of Nitrite in Foods

An ultra-sensitive electrochemical sensing platform based on nanoflower-like Au/ZnO array on carbon cloth for the rapid detection of the nitrite residues in food samples

Ultrathin Ni-MOF Nanobelts-Derived Composite for High Sensitive Detection of Nitrite

Electrochemical Determination of Food Preservative Nitrite with Gold Nanoparticles/p-Aminothiophenol-Modified Gold Electrode

Cerium vanadate/functionalized carbon nanofiber composite for the electrochemical detection of nitrite

Surface engineering of carbon selenide nanofilms on carbon cloth: An advanced and ultrasensitive self-supporting binder-free electrode for nitrite sensing

Novel Ag-coated Nanofibers Prepared by Electrospraying As a SERS Platform for Ultrasensitive and Selective Detection of Nitrite in Food

4-Aminothiophenol capped halloysite nanotubes/silver nanoparticles as surface-enhanced Raman scattering probe for in-situ derivatization and selective determination of nitrite ions in meat product

High Sensitivity Detection of Nitrite Electrochemical Sensor Modified with MOF Composite Materials

Electrochemical Detection of Aqueous Nitrite Based on Poly(aniline-Co-o-aminophenol)-modified Glassy Carbon Electrode

In situ fabrication of copper oxide nanoparticles decorated carbon cloth for efficient electrocatalytic detection of nitrite

Enhanced Electrocatalytic Nitrite Determination Using Poly(diallyldimethylammonium Chloride)-Coated Fe1.833(OH)0.5O2.5-decorated N-doped Graphene Ternary Hierarchical Nanocomposite

Non-enzymatic electrochemical sensor based on ionic liquid [BMIM][PF6] functionalized zirconium‑copper bimetallic MOF composite for the detection of nitrite in food samples