Abstract:Optical tomography has been demonstrated to be a powerful tool for the three-dimensional (3D) measurement of the dynamic characteristics of turbulent flame. Many practical visualizations of reaction flows require imaging through optical windows on the combustor, which have complex interactions with wall temperature, reflection characteristics, and limited optical access, which may seriously influence the imaging quality. Previous work focused on unconfined flame imaging, and lacked the study of the multiple reflection effects of the wall and the tomographic reconstruction within a wide temperature range. To solve these problems, the effect of chamber wall radiation on the photothermal information is analyzed in the forward problem, and the flame temperature with wall radiation is reconstructed in the inverse problem. In the forward problem, the light field acquisition model of spontaneous emission of the confined flame is developed through the backward Monte Carlo method based on the radiation distribution factor, which can comprehensively consider the essential effects such as radiative attenuation, wall reflection, medium scattering interference, and limited optical access. The recorded light field signals indicate that the reflection pattern and transfer mechanism of the wall material could affect the contribution of radiative source terms in different discrete domains to the detected energy. A novel tomography algorithm, namely, the adaptive threshold segmentation iterative regularization (ATSIR) method, has been proposed to extend the temperature range of tomography. The key of this method is to carry out a two-step reconstruction of the high and low-temperature regions through the temperature threshold, and introduce the prior smoothing information to alleviate the ill-posedness of tomography. The visualization results show that the well-established algorithms (e.g., least-square QR-factorization and regularization) have lower reconstruction quality for the combustion field within a wide temperature range, even if the regularization term is added. However, the proposed ATSIR method has the advantages of better suppression of fluctuations, smaller reconstruction error, and stronger anti-noise ability. The detailed analysis of the radiative transfer mode and 3D temperature visualization of the combustion field in a confined space can provide a valuable guideline for the safety design of the engine combustion chamber and fuel utilization.

Impinging Flame Ignition and Propagation Visualisation Using Schlieren and Colour-Enhanced Stereo Imaging Techniques

Visualization of Multi-Regime Turbulent Combustion in Swirl-Stabilized Lean Premixed Flames

Time-Resolved 3d Investigation of the Ignition Process of A Methane Diffusion Impinging Flame

Three-Dimensional Investigation of the Dynamics of A Propane Diffusion Flame

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

Stereoscopic Visualization and Reconstruction of Turbulent Flames

Simultaneous Amplitude and Phase Contrast Imaging of Burning Fuel Particle and Flame with Digital Inline Holography: Model and Verification

3-D Turbulent Premixed Flamelet Stretch Visualization Based on High Speed Stereoscopic Image

Flame Reconstruction Using Synthetic Aperture Imaging

FLAME EMISSION CHARACTERISTICS IN A DIRECT INJECTION SPARK IGNITION OPTICAL ENGINE USING IMAGE PROCESSING BASED DIAGNOSTICS

Simultaneous estimation of the 3-D soot temperature and volume fraction distributions in asymmetric flames using high-speed stereoscopic images.

Studies On Gas Concentration Reconstruction Methods For Simultaneous Temperature And H2o Concentration Tomographic Imaging In A Flame Based On Tunable Diode Laser Absorption Spectroscopy

Characterisation of External Acoustic Excitation on Diffusion Flames Using Digital Colour Image Processing

Flame reconstruction of hydrogen fueled-scramjet combustor based on multi-source information fusion

A Study of the Three-dimensional Movement of a Coherent Structure in a Methane Diffusion Flame Space

Three-dimensional inhomogeneous temperature tomography of confined-space flame coupled with wall radiation effect by instantaneous light field

Visualization of diffusion flame/Vortex Structure and Dynamics under Acoustic Excitation

Experimental Investigation of Transient Ignition Dynamics of Hydrogen Enriched Methane Diffusion Impinging Flames

Experimental Study on Instantaneous Plume Characteristics Based on Flame 3D Reconstruction

Quantitative Three-Dimensional Reconstruction of Cellular Flame Area for Spherical Hydrogen-Air Flames

A simultaneous measurement technique for soot temperature and volume fraction of sooting flames considering self-absorption through hyperspectral imaging