Abstract:In this work, the effects of realistic roughness scales on boundary layer transition are investigated using high-resolution scale-resolving simulations. This is in contrast to most of the roughness-induced transition studies reported in the literature based on ordered and well-defined surface roughness elements. Two highly irregular surface roughness patterns are generated from a given roughness patch by selectively filtering out the higher frequencies. The transitional behavior of a laminar boundary layer developing over these roughness scales is examined at and 540, defined in terms of the inflow velocity and inlet displacement thickness. The impact on transition is explored by examining the instantaneous and time-averaged flow fields. The results show that the transition onset is sensitive to the roughness scales: the inclusion of finer scales reduces the spacing between roughness features thereby constraining the lateral development of the flow. The streaks are weaker due to the mutual sheltering effect and the finer scales are shown to promote spanwise inhomogeneity of flow in the transition region. This effect is found to be much more prominent at low Reynolds numbers. In contrast, filtering out the finer roughness scales results in an earlier transition onset, caused by strong streaks developing from the horseshoe vortices wrapping around sparsely packed roughness features. Further cases are studied to investigate the spatial features of roughness that are important for transition. A series of high-fidelity simulations using selective retention of roughness features are performed at . The transition onset can be predicted satisfactorily by retaining the dominant scales (20 tallest peaks in this study) from the original rough surface while the valleys and fine-scale features are shown to have minimal effect. In addition, we demonstrate that modifying the roughness patch or Reynolds number during the simulation alters the transition onset, which gets quickly established within . These findings have the potential to reduce the computational cost and further aid in improving the transition correlations employed in low-fidelity simulations.

Studies of roughness-induced transition using three-quation κ-ω-γ transition/turbulence model

Application of simplified threeGequation transition model in hypersonic flow

Improved K-Ω-γ Transition Model Considering Distributed Surface Roughness

Distributed Roughness Induced Transition on Wind-Turbine Airfoils Simulated by Four-Equation K-Ω-γ-ar Transition Model

Surface-Roughness Effects on Crossflow Instability of Swept-Wing Boundary Layers Through Generalized Resonances

Predicting distributed roughness induced transition with a four-equation laminar kinetic energy transition model

A Combined Experimental and Numerical Investigation of Roughness Induced Supersonic Boundary Layer Transition

Improved k-omega-gamma transition model considering distributed surface roughness

Roughness-Induced Transition in Supersonic Boundary Layers with Wall Heating and Cooling Effects

Triadic Resonance Analysis of Distributed Roughness Effects on Crossflow Instability in Swept-Wing Boundary Layers

Hypersonic Transition Induced by Three Isolated Roughness Elements on a Flat Plate

A NEW TRANSITION/TURBULENCE MODEL FOR THE FLOW TRANSITION IN SUPERSONIC BOUNDARY LAYER

Direct Numerical Simulation and Modal Analyses of Spanwise-Adjacent Roughness Elements Induced Transition

Direct Numerical Simulation of Geometrical Parameter Effects on the Hypersonic Ramp-Induced Transition

Modeling of Surface Roughness Effects on Bypass and Laminar Separation Bubble-Induced Transition for Turbomachinery Flows

Roughness Implementation and Convective Heat Transfer Coefficient Computation Toward Ice Accretion Simulation

Experimental study of the effects of isolated roughness elements on the stability and transition of a hypersonic boundary layer on a flat plate

Scaling of rough-wall turbulence in a transitionally rough regime

A Three-Equation Transition Model with Mechanical Considerations

The Impact of Real Roughness Features on Boundary Layer Transition

Direct Numerical Simulation of Hypersonic Transition Induced by an Isolated Cylindrical Roughness Element