Abstract:This research is motivated by the recent work which has presented a new loosely-coupled partitioned algorithm for fluid–structure interaction (FSI) [R. Jaiman, P. Geubelle, E. Loth, X. Jiao, Combined interface boundary condition method for unsteady fluid–structure interaction, Comput. Methods Appl. Mech. Engrg. 200 (2011) 27–39]. The loosely-coupled partitioned algorithm is intrinsically exposed to the notorious time lag effect whose remedy promotes the combined interface boundary condition (CIBC) method. In this method, correction terms for velocity and traction are introduced at two sequential time steps with a coupling parameter ω that plays an important part in the stability and accuracy of the coupled system. The structural traction ratio that appears explicitly in the traction correction is estimated based on the solution of the structural subsystem. This handling asks for the structural traction before it is corrected by the CIBC method. In this paper, a new formulation for the CIBC method is developed to repair the aforementioned inconvenience. After simple manipulation, the structural traction ratio is removed in constructing the traction correction. Therefore the structural traction is no more needed in CIBC correction terms. Meantime the ratio ω/Δt is employed to tune the interfacial corrections instead of the coupling parameter ω. An arbitrary Lagrangian–Eulerian finite element method is used to analyze FSI. The characteristic-based split (CBS) scheme is employed to solve incompressible Navier–Stokes equations while the equation for rigid-body dynamics is solved by Newmark-β method. A numerical technique called moving submesh approach is performed for the mesh deformation. For respecting geometric conservation law, a mass source term is implanted into the CBS scheme on the moving mesh. Several numerical examples are tested to validate the proposed methodology for fluid–rigid body interaction. The obtained results are in agreement with the existing data and some famous features of flow phenomena have been detected successfully.

Numerical analysis of free rotation gallop of a rectangular cylinder using improved CIBC method

Analysis of Rotationally Oscillating Rectangular Cylinder Based on CIBC Iterative Coupling Technique

Computation of Flow Past an In-Line Oscillating Circular Cylinder and a Stationary Cylinder in Tandem Using a CIP-Based Model

Combined Interface Boundary Condition Method for Fluid–rigid Body Interaction

Numerical Simulation of Wave Interaction with Coastal Structures Using a CIP-based Method

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Numerical simulation of water entry using CIP model

A Computational Strategy for Nonlinear Coupled Constitutive Relations of Rarefied Nonequilibrium Flows on Unstructured Grids

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh

Analytical Method of Nonlinear Coupled Constitutive Relations for Rarefied Non-Equilibrium Flows

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

A CIP-based Numerical Simulation of Freak Wave Impact on a Floating Body

Partitioned Subiterative Coupling Schemes for Aeroelasticity Using Combined Interface Boundary Condition Method

Lattice Boltzmann simulation of viscoelastic flow past a confined free rotating cylinder

A MODIFIED CBS FINITIE ELEMENT APPROACH FOR FLUID-STRUCTURE INTERACTION

An Improved CIP-based Numerical Model for Simulating Free-Surface Flow with Adaptive Mesh

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

IBM/ICM Method for Interactions Between Moving Bodies and Free Surfaces

Numerical Study of Transverse Galloping and Vortex-Induced Vibrations of Square Cylinder