Abstract:Pseudocapacitance holds great promise for energy density improvement of supercapacitors, but electrode materials show practical capacity far below theoretical values due to limited ion diffusion accessibility and/or low electron transferability. Herein, inducing two kinds of straight ion-movement channels and fast charge storage/delivery for enhanced reaction kinetics is proposed. Very thick electrodes consisting of vertically aligned and ordered arrays of NiCo2S4-nanoflake-covered slender nickel columns (NCs) are achieved via a scalable route. The vertical standing ∼5 nm ultrathin NiCo2S4 flakes build a porous covering with straight ion channels without the "dead volume", leading to thickness-independent capacity. Benefiting from the architecture acting as a "superhighway" for ultrafast ion/electron transport and providing a large surface area, high electrical conductivity, and abundant availability of electrochemical active sites, the NiCo2S4@NC-array electrode achieves a specific capacity up to 486.9 mAh g–1. The electrode even can work with a high specific capacity of 150 mAh g–1 at a very high current density of 100 A g–1. In particular, due to the advanced structure features, the electrode exhibits excellent flexibility with a unexpected improvement of capacity when being largely bent and excellent cycling stability with an obvious resistance decrease after the cycles. An asymmetric pseudocapacitor applying the NiCo2S4@NC-array as a positive electrode achieves an energy density of 66.5 Wh kg–1 at a power density of 400 W kg–1, superior to the most reported values for asymmetric devices with NiCo2S4 electrodes. This work provides a scalable approach with mold-replication-like simplicity toward achieving thickness-independent electrodes with ultrafast ion/electron transport for energy storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c02973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c02973</a>.Illustration of synthesis process of a nickel template; XRD patterns of the typical NiCo2S4@NC-array and the bare NC-array; physicochemical characterization results of the NiCo2S4@NC-array electrode including the XPS spectra and SEM images; SEM images of FeCo2S4 nanowires at NC-array; CV and GCD curves of the NiCo2S4@NC-array electrodes obtained with different tR; low-magnification SEM-EDS elemental mappings and XPS analysis of the NiCo2S4@NC-array electrode after 2000 cycles; SEM image of a porous pressed on a Ni foam and CV curves of the positive and negative electrodes recorded at 20 mV s–1; table presenting the electrochemical performance comparison with other reported values (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c02973/suppl_file/nn0c02973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of Ni(OH)2 Coated ZnO Array for High-Rate Pseudocapacitive Energy Storage

Co3O4@CoNi-LDH Core/shell Nanosheet Arrays for High-Performance Battery-Type Supercapacitors

NiCo2S4@Ni3S2 Hybrid Nanoarray on Ni Foam for High-Performance Supercapacitors

Ni3S2 coated ZnO array for high-performance supercapacitors

Ultrathin Nickel Hydroxidenitrate Nanoflakes Branched On Nanowire Arrays For High-Rate Pseudocapacitive Energy Storage

One-Pot Fabrication Of Layered Alpha-Phase Nickel-Cobalt Hydroxides As Advanced Electrode Materials For Pseudocapacitors

Fabrication of Ni(OH)2 nanoflakes array on Ni foam as a binder-free electrode material for high performance supercapacitors

ZnO/CoS Heterostructured Nanoflake Arrays Vertically Grown on Ni Foam for High-Rate Supercapacitors

High-quality metal oxide core/shell nanowire arrays on conductive substrates for electrochemical energy storage.

Design of Hollow Porous P-NiCo2O4@Co3O4 Nanoarray and Its Alkaline Aqueous Zinc-Ion Battery Performance

Fabrication of Zn-Cu-Ni Ternary Oxides in Nanoarrays for Photo-Enhanced Pseudocapacitive Charge Storage

Development of heterostructure-like Zn2P2O7/NF@PPybinder-free electrode for high-energy hybrid supercapacitor applications

Self-assembled porous NiCo2O4 hetero-structure array for electrochemical capacitor

In Situ Growth of Layered Bimetallic ZnCo Hydroxide Nanosheets for High-Performance All-Solid-State Pseudocapacitor.

Vertically Aligned and Ordered Arrays of 2D MCo2S4@Metal with Ultrafast Ion/Electron Transport for Thickness-Independent Pseudocapacitive Energy Storage

3D heterogeneous ZnCo2O4@NiMoO4 nanoarrays grown on Ni foam as a binder-free electrode for high-performance energy storage

O-Vacancy-enriched NiO hexagonal platelets fabricated on Ni foam as a self-supported electrode for extraordinary pseudocapacitance

NiCoP Nanoarray: A Superior Pseudocapacitor Electrode with High Areal Capacitance

Vertically Aligned and Ordered Arrays of 2D MCo 2 S 4 @Metal with Ultrafast Ion/Electron Transport for Thickness-Independent Pseudocapacitive Energy Storage

Three-dimensional Porous ZnCo(2)O(4) Sheet Array Coated with Ni(OH)(2) for High-Performance Asymmetric Supercapacitor.

Enhanced Pseudocapacitive Energy Storage of Oxides Grown on Nanoporous Alloys by Solid Solution