Abstract:The effects of different solvents (dimethyl formamide: DMF and dimethylsulfoxide: DMSO) on the solubility of polyacrylonitrile (PAN) were investigated by the phase diagrams of H2O/DMF/PAN and H2O/DMSO/PAN ternary systems through cloud-point titration method at low polymer concentration. The influences of polymer concentrations and temperatures on the morphologies of PAN ultrafiltration membranes were elucidated. The morphologies of fabricated UF membranes were characterized by scanning electron microscopy (SEM) and atomic force microscope (AFM), and the basic performance of ultrafiltration including pure water flux and rejection of BSA were explored. At 25 degrees C, the pure water flux of ultrafiltration membranes at the lower PAN content (16 wt % PAN in 84 wt % DMSO) reached 213.8 L/m/bar and the rejection of BSA was 100%. Interestingly, the water flux of UF membranes dramatically decreased to 20.6 L/m/bar (20 wt %) and 2.9 L/m/bar (24 wt %) when increasing PAN concentrations in DMSO. On the other hand, the hydrophilicity of membranes can be enhanced by increasing coagulation temperatures and polymer concentrations which were characterized by static contact angle, fitting well with the variation tendency of roughness. Although there are many works concerning on the effects of phase inversion conditions on the performance of PAN UF membranes, to our best knowledge, there is seldom works focusing on investigating the membrane hydrophilicity trend by adjusting phase inversion conditions. To disclose the reason of the enhanced hydrophilicity, the water and glycol contact angles of various membranes were measured and the surface tensions were presented. The results illustrated that the enhanced hydrophilicity of PAN UF membranes fabricated at higher temperatures or higher polymer concentrations was due to the higher polarity on membrane surface. Since the vast majority of ultrafiltration membranes in labs and in industrial scale have been fabricated by immersion phase inversion method, this work can provide a guidance to obtain hydrophilic PAN UF membranes by adjusting the process of phase inversion. (c) 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41991.

Study on the Control of Pore Sizes of Membranes Using Chemical Methods Part IV. the Role of Organic Acids

Pore Functionalization of Cationic Covalent Organic Frameworks Membrane: A Case Towards Acid Recovery

Insights into the Effect of Preparation Variables on Morphology and Performance of Polyacrylonitrile Membranes Using Plackett–Burman Design Experiments

Study on the control of pore sizes of membranes using chemical methods

Modulation the Morphologies and Performance of Polyacrylonitrile-Based Asymmetric Membranes Containing Reactive Groups: Effect of Non-Solvents in the Dope Solution

In-situ modification of PVDF membrane during phase-inversion process using carbon nanosphere sol as coagulation bath for enhancing anti-fouling ability

A Novel Process for the Post-Treatment of Polyacrylonitrile-Based Membranes: Performance Improvement and Possible Mechanism

Pore morphology control and hydrophilicity of polyacrylonitrile ultrafiltration membranes

Influence of citric acid concentrations on the porosity and performance of cellulose acetate-based porous membranes: A comprehensive study

Acrylonitrile-based Copolymers Containing Reactive Groups: Synthesis and Preparation of Ultrafiltration Membranes

Preparation of Polyacrylonitrile Ultrafiltration Membranes

Surface Modification of Polyacrylonitrile Membrane by Chemical Reaction and Physical Coating: Comparison between Static and Pore-Flowing Procedures

Study on preparation and performance characteristics of polyvinyl chloride-co-vinyl acetate-modified membranes on the nonwoven fabrics

Effects of organic acids on the performance of cellulose triacetate forward osmosis membrane

Preparation and characterization of polyacrylonitrile blend membrane with the different molecular weight

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Preparation and Characterization of Polyacrylonitrile Ultrafiltration Membranes

Preparation and characterization of polyacrylonitrile/bentonite blend membrane for wastewater treatment

A Gas–liquid Chemical Reaction Treatment and Phase Inversion Technique for Formation of High Permeability PAN UF Membranes

Study on Preparation and Performance of Modified Polyvinyl Chloride-co-vinyl Acetate Microfiltration Membranes

Thermo-responsive polyacrylonitrile membranes prepared with poly(acrylonitrile-g-isopropylacrylamide) as an additive