Abstract:We report here the first coupling of fast GC to IRMS, in a system capable of 250 ms peak widths (fwhm) at 1 mL/min flow rates, one-fifth as narrow as any previously reported GCC-IRMS system. We developed an optimized postcolumn interface that results in minimal peak broadening, using a programmable temperature vaporization injector in place of a rotary valve or backflush system to divert solvent, a narrow capillary combustion reactor followed by a cryogenic water trap with narrow-bore (< 0.20 mm We transfer lines, and a narrow W. open split to the IRMS directly inserted into the column effluent. Quantitative combustion was demonstrated with CH4 injections. A comparison of CO2 injections with different fwhm peak widths (250, 2500, and 7500 ms) showed similar precisions, SD(delta C-13) = 0.2-0.3 parts per thousand, for injections of > 600 pmol C on column; precision for the narrow peaks (250 ms) was considerably better for injections < 150 pmol C on column. SD(delta C-13) < 1 parts per thousand was achievable for injections of 5-15 pmol on column for 250 ms wide peaks, 10-fold better precision than 2500 ms wide peaks, and within a factor of 3 of the counting statistics Emit For a mixture of 15 fatty acid methyl esters (FAME), 1.5 nmol C of each on column yielded typical SD(delta C-13(pdb)) = 0.4 parts per thousand for fast GC and 0.5%o for conventional GC. For 14 of the 15 FAME, delta C-13 values between the two systems were within 1.5 parts per thousand and not significantly different Fast GCC-IRMS required one-third the run time (450 s vs 1400 s) to achieve comparable resolution. Mean peak widths for fast GCC-IRMS of the FAME were 720 ins, compared to 650 ms by fast GC with flame ionization detection. At a 15-fold dilution (100 pmol C on column for each FAME), fast GCC-IRMS achieved -2-fold better precision and accuracy than similar injections on conventional GCC-ERMS. Finally, a mixture of 10 steroids (similar to 7 nmol C (100 ng) each on column) was analyzed with mean precision of SD)(delta C-13) = 0.2 parts per thousand in 620 s by fast GCC-IRMS, while conventional GCC-IRMS required 1200 s and achieved poorer resolution. delta C-13 values for the two system were similar (Delta delta C-13 <=:5 2 parts per thousand for all steroids), indicating that accuracy is not compromised. In summary, fast GCC-IRMS can achieve similar precision to conventional GC with considerable time savings for standard sample sizes (> 1 nmol C) and achieves modest precision (similar to 1 parts per thousand) near the counting statistics limit on low level components.

Optimization of Programmed-Temperature Vaporization Injection Preparative Capillary Gc for Compound Specific Radiocarbon Analysis

Copyrolysis of Biomass and Synthetic Polymer Mixtures and Gas Chromatographic Analysis of Gaseous Hydrocarbons

Preparative Gas Chromatography and Its Applications

Determination Of 67 Volatile Organic Compounds In Ambient Air Using Thermal Desorption-Gas Chromatography-Mass Spectrometry

Analysis Of Polycyclic Aromatic Hydrocarbons By Capillary Electrochromatography By Using Capillary Columns Packed With Polycyclic-Aromatic-Hydrocarbon-Specific Particles

Automated compound speciation, cluster analysis, and quantification of organic vapors and aerosols using comprehensive two-dimensional gas chromatography and mass spectrometry

Selection or removal of compounds from complex samples by peak isolation using an enhanced GCxGC configuration

[Research progress of pyrolysis combined with ion chromatography].

Comparing Stable Isotope Enrichment By Gas Chromatography With Time-Of-Flight, Quadrupole Time-Of-Flight, And Quadrupole Mass Spectrometry

Fast gas chromatography combustion isotope ratio mass spectrometry.

Analysis of Volatile Organic Compounds Using Cryogen-Free Thermal Modulation Based Comprehensive Two-Dimensional Gas Chromatography Coupled with Quadrupole Mass Spectrometry

Compact, Automated, Inexpensive, and Field-Deployable Vacuum-Outlet Gas Chromatograph for Trace-Concentration Gas-Phase Organic Compounds

Optimization of Gas Chromatographic Analytical Methods for Toxic Compounds in Air

Improving Thermal Desorption Aerosol Gas Chromatography Using a Dual-Trap Design

Total-transfer comprehensive three-dimensional gas chromatography with time-of-flight mass spectrometry

Optimization of Two-Stage Thermal Desorption Combined with Pentafluorophenyl Hydrazine Derivatization-Gas Chromatography/mass Spectrometry Analytical Method of Atmospheric Carbonyl Compounds

Optimizing analytical precision in the identification of synthetic cathinones and isomers: a comparative assessment of diverse GC–MS operating parameters

A Rapid Pretreatment Method of PCDD/Fs in Soil and High Resolution Gas Chromatograph-High Resolution Mass Spectrometry Analysis

Quantitative analysis of 68 polar compounds from ten chemical classes by direct aqueous injection gas chromatography

High-throughput identification of volatile and semi-volatile organic compounds in archaeological samples by gas chromatography–mass spectrometry combined with advanced chemometrics methodology

Cost-Effective Detection of Perfluoroalkyl Carboxylic Acids with Gas Chromatography: Optimization of Derivatization Approaches and Method Validation