Abstract:L-Pheand Zn(NO3)2 are efficient hybrid inhibitor for Mg alloys in NaCl solution.Appropriate concentration and ratio between them are critical for inhibition effect.The film is formed on metal surface including complicate composition.Inhibition mechanism is proposed according to XPS and theoretical calculation.L-Phenylalanine (L-Phe) is a promising eco-friendly alternative to replace the conventional toxic inhibitors for magnesium alloys in NaCl solution. However, its inhibitory performance is not satisfied. The addition of slight amount Zn(NO3)2 would greatly refine the inhibitory efficiency. The inhibitory performance of hybrid inhibitor is explored by scanning electron microscopy (SEM) along with energy dispersive X-ray spectroscopy (EDS), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), and various electrochemical measurements. The highest inhibitory efficiency of 93.2% is achieved for 0.30 mM L-Phe + 0.07 mM Zn(NO3)2. The amount of each inhibitor and the suitable match of two inhibitors are carefully determined, which are both critical items for the final performance. The possible inhibitory mechanism is conjectured by the XRD and XPS measurements along with the quantum chemical calculations.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021001565-fx1_lrg.jpg">Download : Download high-res image (169KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021001565-fx1.jpg">Download : Download full-size image</a></li></ol>

2-Hydroxy-4-methoxy-acetophenone as an environment-friendly corrosion inhibitor for AZ91D magnesium alloy

The Corrosion Inhibition Behaviors of 2′‐hydroxy‐acetophenone for AZ91D Magnesium Alloy

Study of the Effect of Environmental and Friendly Corrosion Inhibitors on Magnesium Alloy

A Study on Corrosion Inhibitor for Magnesium Alloy

A Study of Environment-Friendly Synergistic Inhibitors for AZ91D Magnesium Alloy

Study of corrosion inhibitors on AZ91D magnesium alloy

Orange peel extracts as biodegradable corrosion inhibitor for magnesium alloy in NaCl solution: Experimental and theoretical studies

Synergistic corrosion inhibition of sodium phosphate and sodium dodecyl sulphate on magnesium alloy AZ91 in 3.5 wt% NaCl solution

Synergistic Inhibition Behavior of Sodium Diethyldithiocarbamate and Sodium Acetate for AZ31B Magnesium Alloy in NaCl Solution

Improving Environmental Adaptability and Long-Term Corrosion Resistance of Mg Alloys by Pyrazole Ionic Liquids: Experimental and Theoretical Studies

Plasma Electrolytic Oxidation of AZ91D Magnesium Alloy with Different Additives and Its Corrosion Behavior

Fabrication of Environmentally Friendly Anti-Corrosive Composite Coatings on AZ31B Mg Alloy by Plasma Electrolytic Oxidation and Phytic Acid/3-Aminopropyltrimethoxysilane Post Treatment

Study of composition and corrosion protection afforded by phytic acid conversion coatings applied to AZ91D magnesium alloy

The Use of Phytic Acid Conversion Coating to Enhance the Corrosion Resistance of AZ91D Magnesium Alloy

Chemically depleting the noble impurities from AZ91-T4 magnesium alloy: A new and efficient pretreatment method to improve the corrosion resistance of phosphate conversion coatings

Corrosion Protection of AZ91D Magnesium Alloy with Sol–gel Coating Containing 2-Methyl Piperidine

Corrosion Behavior of AZ91D Magnesium Alloy in Phytic Acid Solution

Synergistic inhibition effect of L-Phenylalanine and zinc salts on chloride-induced corrosion of magnesium alloy: Experimental and theoretical investigation

Corrosion Behavior of MAO Coating on Magnesium Alloy in Ehylene Glycol Aqueous Solution

Novel Green and Ecofriendly Route for Fabricating a Robust Corrosion Protection Coating on AZ91D Magnesium Alloy

A simple approach to enrich the chromium-free conversion coating system on magnesium alloy for corrosion resistance