Synthesis Of Sequence-Ordered Polymers Via Sequential Addition Of Monomers In One Pot

Jun-Jie Yan,Di Wang,De-Cheng Wu,Ye-Zi You

DOI: https://doi.org/10.1039/c3cc42483a

IF: 4.9

2013-01-01

Chemical Communications

Abstract:Sequence-ordered polymers can be simply prepared in one pot via sequential monomer addition.

What problem does this paper attempt to address?

Synthesis of Sequence-Controlled Polymers Via Sequential Thiol-Ene and Amino-Yne Click Reactions in One Pot

Lei Yu,Ze Zhang,Ye-Zi You,Chun-Yan Hong

DOI: https://doi.org/10.1016/j.eurpolymj.2018.02.006

IF: 6

2018-01-01

European Polymer Journal

Abstract:Sequence-controlled polymers are prepared by the combination of thiol-ene click reaction and amino-yne click reaction. Due to the high selectivity of the amine unit and thiol unit toward thiolactone, methacrylate, propiolate, etc., the sequence of the resulting polymers can be easily controlled by monomer-addition sequence. Moreover, thiol-ene click reaction and amino-yne click reaction can be carried out under mild conditions without need of any catalyst. Different kinds of sequence-controlled copolymers have been prepared by the combination of thiol-ene click reaction and amino-yne click reaction in one pot. NMR spectra and GPC traces confirmed the formation of polymers with high molecular weight and controlled sequence structure. Therefore, we provide a new method for the preparation of functional polymers with well-controlled sequences.
Sequence-Reversible Construction of Oxygen-Rich Block Copolymers from Epoxide Mixtures by Organoboron Catalysts

Yao-Yao Zhang,Guan-Wen Yang,Rui Xie,Xiao-Feng Zhu,Guang-Peng Wu

DOI: https://doi.org/10.1021/jacs.2c07857

IF: 15

2022-01-01

Journal of the American Chemical Society

Abstract:Switchable catalysis, in combination with epoxide-involved ring-opening (co)polymerization, is a powerful technique that can be used to synthesize various oxygen-rich block copolymers. Despite intense research in this field, the sequence-controlled polymerization from epoxide congeners has never been realized due to their similar ring-strain which exerts a decisive influence on the reaction process. Recently, quaternary ammonium (or phosphonium)-containing bifunctional organoboron catalysts have been developed by our group, showing high efficiency for various epoxide conversions. Herein, we, for the first time, report an operationally simple pathway to access well-defined polyether-block-polycarbonate copolymers from mixtures of epoxides by switchable catalysis, which was enabled through thermodynamically and kinetically preferential ring-opening of terminal epoxides or internal epoxides under different atmospheres (CO2 or N2) using one representative bifunctional organoboron catalyst. This strategy shows a broad substrate scope as it is suitable for various combinations of terminal epoxides and internal epoxides, delivering corresponding well-defined block copolymers. NMR, MALDI-TOF, and gel permeation chromatography analyses confirmed the successful construction of polyether-block-polycarbonate copolymers. Kinetic studies and density functional theory calculations elucidate the reversible selectivity between different epoxides in the presence/absence of CO2. Moreover, by replacing comonomer CO2 with cyclic anhydride, the well-defined polyether-block-polyester copolymers can also be synthesized. This work provides a rare example of sequence-controlled polymerization from epoxide mixtures, broadening the arsenal of switchable catalysis that can produce oxygen-rich polymers in a controlled manner.
Syntheses Of Sequence-Controlled Polymers Via Consecutive Multicomponent Reactions

Ze Zhang,Ye-Zi You,Decheng Wu,Chun-Yan Hong

DOI: https://doi.org/10.1021/acs.macromol.5b00463

IF: 5.5

2015-01-01

Macromolecules

Abstract:Multicomponent reactions have recently attracted a great deal of attention as they are considered as a powerful tool for constructing sequence-controlled polymers. Although new examples are constantly flourishing in the literature, the process that allows two or more consecutive multicomponent-reactions to react in a single operation for the syntheses of sequence-controlled polymers has not been developed until now. Here, we propose a new strategy combining multicomponent reaction of amine, thiol, and alkene conjugating and multicomponent polymerization of diyne, azide, and diamine coupling in one-pot for the synthesis of sequence-controlled polymer.
Controllable Preparation of Complex Polymer Chains and Novel Materials

LUO Yingwu

DOI: https://doi.org/10.3969/j.issn.0438-1157.2013.02.004

2013-01-01

Abstract:The product from free radical and coordination polymerization generally are homopolymer or random copolymer with broad molecular weight distribution.In the past two decades,the breakthroughs in controlled/living radical and coordination polymerization and shuttling polymerization make it possible to use almost all vinyl monomers,particularly those cheap monomers,to produce more complex chain structures like di-,tri-block copolymer and gradient copolymers.With rational design,these copolymers might be high performance and high added value synthetic materials.The mechanisms and the up-to-date progress of these polymerization methods were introduced,and their possible applications were discussed.
A Strategy Combining Quantitative Reactions and Reversible-Covalent Chemistry for Sequential Synthesis of Sequence-Controlled Polymers with Different Sequences

Chao-Ran Xu,Ze Zhang,Cai-Yuan Pan,Chun-Yan Hong

DOI: https://doi.org/10.1016/j.polymer.2019.04.017

IF: 4.6

2019-01-01

Polymer

Abstract:A new strategy combing quantitative reactions and reversible-covalent chemistry is proposed for sequential synthesis of a series of sequence-controlled polymers with different sequences. Using a Michael addition reaction between acrylate and thiol, an aminolysis reaction of five-membered cyclic dithiocarbonate and a thiol substitution reaction of bromomaleimide and thiol, AB-, AB'C- and AB'CD-sequenced molecules are synthesized via AB, AB'C and AB'CD sequential monomer additions, respectively. These three molecules all have furan-protected maleimido group at one end, and the other end of AB-, AB'C- and AB'CD-sequenced molecules is amine, thiol and anthracene groups, respectively. Due to the fact that the furan-protected maleimido group can be efficiently transformed to maleimide group at high temperature via retro Diels-Alder reaction, AB-, AB'C- and AB'CD-sequenced molecules polymerize into sequence-controlled polymers with corresponding sequences at 120 degrees C. Through this strategy, the synthesis of molecular modules does not require separation and purification, and sequence-controlled polymers with specific sequence can be synthesized in a one-pot process via adding different monomers and adjusting reaction condition.
Facile One‐Pot Synthesis of New Functional Polymers Through Multicomponent Systems

Shiqi Wang,Changkui Fu,Yen Wei,Lei Tao

DOI: https://doi.org/10.1002/macp.201300738

IF: 2.996

2014-01-01

Macromolecular Chemistry and Physics

Abstract:The synthesis of polymers with various functional groups has always been the core of polymer chemistry. Traditionally, there are two approaches to prepare such polymers: i) preparing functional monomers first and then conducting polymerization to get target functional polymers; and ii) post‐modification of a precursor polymer. Both methods unavoidably involve separation and purification of intermediate products, which is laborious and time‐consuming. A one‐pot synthesis strategy, which combines monomer preparation and controlled polymerization in just one reactor to generate well‐defined polymers efficiently, is thus proposed. Recent advances in the one‐pot synthesis of multifunctional polymers through a multicomponent system are provided in this article. image
Synthesis of polymers with on-demand sequence structures via dually switchable and interconvertible polymerizations

Ze Zhang,Tian-You Zeng,Lei Xia,Chun-Yan Hong,De-Cheng Wu,Ye-Zi You

DOI: https://doi.org/10.1038/s41467-018-05000-2

IF: 16.6

2018-01-01

Nature Communications

Abstract:The synthesis of polymers with on-demand sequence structures is very important not only for academic researchers but also for industry. However, despite the existing polymerization techniques, it is still difficult to achieve copolymer chains with on-demand sequence structures. Here we report a dually switchable and controlled interconvertible polymerization system; in this system, two distinct orthogonal polymerizations can be selectively switched ON/OFF independent of each other and they can be interconverted promptly and quantitatively according to external stimuli. Thus, the external stimuli can manipulate the insertion of distinct monomers into the resulting copolymer chains temporally, spatially, and orthogonally, allowing the on-demand precise arrangement of sequence structures in the resulting polymers. This dually switchable and interconvertible polymerization system provides a powerful tool for synthesizing materials that are not accessible by other polymerization methods.
Synthesis of copolymer via hybrid polymerization: From random to well-defined sequence

Lei Xia,Ze Zhang,Chun-Yan Hong,Ye-Zi You

DOI: https://doi.org/10.1016/j.eurpolymj.2019.109374

IF: 6

2020-01-01

European Polymer Journal

Abstract:Synthesizing copolymers with controlled, and even precise sequence structures, such as biological macromolecules, has been a serious challenge in polymer science. Recently, hybrid polymerization has become an attention-getting synthetic method for preparing copolymers with different sequence structures. In this review, we will discuss this method and focus on the sequence structure of the obtained copolymers, which have gone through a process from producing random uncontrollable sequences, to constructing sequence-controlled copolymers and even sequence-on-demand copolymers.
Multistep sequence-controlled supramolecular polymerization by the combination of multiple self-assembly motifs

Hui Li,Shenghui Rao,Ying Yang,Fenfen Xu,Zhe Huang,Xiaohui Huang,Zhu Zhu,Shengyong Liu,Zhelin Zhang,Wei Tian

DOI: https://doi.org/10.1016/j.isci.2023.106023

IF: 5.8

2023-02-01

iScience

Abstract:The precise sequence control of polymer chain is an important research topic of polymer chemistry. Although some methods such as iterative synthesis and supramolecular polymerization have been developed to fabricate sequence-controllable polymer, it is still a great challenge to consecutively prepare multiple supramolecular polymers with different sequence structures. In this work, through the reasonable utilization of assembly motifs, we integrated multiple host-guest recognitions and metal coordination interactions to prepare different sequence-controlled supramolecular polymers by a multistep assembly strategy. This research provides inspiration for the design and preparation of supramolecular polymers with different sequence structures.

multidisciplinary sciences
Sequential Michael addition thiol–ene and radical-mediated thiol–ene reactions in one-pot produced sequence-ordered polymers

lei yu,longhai wang,zongtao hu,yezi you,decheng wu,chunyan hong

DOI: https://doi.org/10.1039/c4py01363h

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Sequential Michael addition-based thiol-ene and free radical mediated thiol-ene reactions for preparing sequence-ordered polymers are reported for the first time. The thiols are produced in situ via the ring-opening of thiolactones, and they can readily react with the electron-deficient carbon-carbon double bond of allyl methacrylate via Michael addition-based thiol-ene, but they are unable to react with the electron-rich carbon-carbon double bond of allyl methacrylate without radicals, and intermediates with thiol and alkene units are formed. After the Michael addition thiol-ene and ring-opening reactions are complete, the thiol is activated by UV irradiation, enabling reaction with the electron-rich carbon-carbon double bond via a free radical-mediated thiol-ene reaction, to form sequence-ordered polymers of high molecular weights.
Two Tandem Multicomponent Reactions for the Synthesis of Sequence-Defined Polymers

Lu Yang,Ze Zhang,Bofei Cheng,Yezi You,Decheng Wu,Chunyan Hong

DOI: https://doi.org/10.1007/s11426-015-5448-0

2015-01-01

Science China Chemistry

Abstract:Multicomponent polymerizations have become powerful tools for the construction of sequence-defined polymers. Although the Passerini multicomponent reaction has been widely used in the synthesis of sequence-defined polymers, the tandem usage of the Passerini multicomponent reaction and other multicomponent reactions in one-pot for the synthesis of sequence-defined polymers has not been developed until now. In this contribution, we report the tandem usage of the Passerini three-component reaction and the three-component amine-thiol-ene conjugation reaction in one pot for the synthesis of sequence-defined polymers. The Passerini reaction between methacrylic acid, adipaldehyde, and 2-isocyanobutanoate was carried out, affording a new molecule containing two alkene units. Subsequently, an amine and a thiolactone were added to the reaction system, whereupon the three-component amine-thiol-ene conjugating reaction occurred to yield a sequence-defined polymer. This method offers more rapid access to sequence-defined polymers with high molecular diversity and complexity.
A general approach towards thermoplastic multishape-memory polymers via sequence structure design.

Yingwu Luo,Yunlong Guo,Xiang Gao,Bo-Geng Li,Tao Xie

DOI: https://doi.org/10.1002/adma.201202884

IF: 29.4

2013-01-01

Advanced Materials

Abstract:The chain sequence of a poly(styrene-co-methyl acrylate) copolymer is designed to form a V-shaped gradient sequence via controlled/living radical emulsion copolymerization. This specially designed chain sequence gives this common copolymer the capacity of multishape memory. The copolymer can sequentially recover to its permanent shape from three or more previously programmed temporary shapes with the stimulus of temperature.
Facile synthesis of multi-block copolymers containing poly(ester-amide) segments with an ordered side group sequence

An Lv,Xinxing Deng,Lei Li,Zilong Li,Yaozong Wang,Fusheng Du,Zichen Li

DOI: https://doi.org/10.1039/c3py00382e

IF: 4.6

2013-01-01

Polymer Chemistry

Abstract:We report a facile method for the synthesis of multi-block copolymers consisting of poly(ethylene glycol) (PEG) and poly(ester-amide) segments with an ordered side group sequence via multicomponent polymerization based on the Passerini reaction (PR). The technique involves the polymer supported liquid-phase synthesis of three PEG diacid macromonomers (M1-M3) via stepwise PR with tert-butyl isocyanoacetate and a functional aldehyde followed by selective hydrolysis, and the final multicomponent polymerization of M1-M3 with phenylacetaldehyde and 1,6-diisocyanohexane.
New Synthetic Strategy for Facile Synthesis of Functional Polymers by One-Pot Combination of Controlled Radical Polymerization and Enzymatic Reaction

Lei Tao,Changkui Fu,Yen Wei

DOI: https://doi.org/10.1002/pi.4875

IF: 3.213

2015-01-01

Polymer International

Abstract:One-pot synthesis in organic chemistry is deeply rooted in people's minds due to its huge improvement in efficiency compared with conventional stepwise synthesis. Nowadays, such a concept has also been shifted to polymer chemistry by one-pot introducing compatible or orthogonal organic reactions with polymerizations for facilely synthesizing or modifying polymers. This review systematically summarizes recent developments in the one-pot combination of enzymatic reactions with controlled radical polymerization to prepare functional polymers. © 2015 Society of Chemical Industry
Sequence-controlled methacrylic multiblock copolymers via sulfur-free RAFT emulsion polymerization

Nikolaos G. Engelis,Athina Anastasaki,Gabit Nurumbetov,Nghia P. Truong,Vasiliki Nikolaou,Ataulla Shegiwal,Michael R. Whittaker,Thomas P. Davis,David M. Haddleton

DOI: https://doi.org/10.1038/nchem.2634

IF: 24.274

2016-10-17

Nature Chemistry

Abstract:Translating the precise monomer sequence control achieved in nature over macromolecular structure (for example, DNA) to whole synthetic systems has been limited due to the lack of efficient synthetic methodologies. So far, chemists have only been able to synthesize monomer sequence-controlled macromolecules by means of complex, time-consuming and iterative chemical strategies such as solid-state Merrifield-type approaches or molecularly dissolved solution-phase systems. Here, we report a rapid and quantitative synthesis of sequence-controlled multiblock polymers in discrete stable nanoscale compartments via an emulsion polymerization approach in which a vinyl-terminated macromolecule is used as an efficient chain-transfer agent. This approach is environmentally friendly, fully translatable to industry and thus represents a significant advance in the development of complex macromolecule synthesis, where a high level of molecular precision or monomer sequence control confers potential for molecular targeting, recognition and biocatalysis, as well as molecular information storage.

chemistry, multidisciplinary
Novel Synthesis of Long Multi-Block Heteropolymer Chains with an Ordered Sequence and Controllable Block Lengths

C Wu,ZW Xie,GZ Zhang,GF Zi

2001-01-01

Chinese Journal of Polymer Science

Abstract:It had very long been a dream in polymer science to synthesize long multi-block polymer chains with an ordered chain sequence and controllable block lengths. Using ionic or living free radical polymerization or furnishing each end of polymer blocks with a reactive functional group, one can only prepare heteropolymer chains with few long blocks, such as diblock and triblock copolymers. The most plausible result so far was a pentablock copolymer. Recently, using a combination of polymer physics and synthetic chemistry, we have invented self-assembly assisted polycondensation (SAAP). This communication reports the results of using this novel method to connect 10-100 triblock polymer chains together to form long multi-block heteropolymer chains with an ordered sequence and controllable block lengths.
The Synthesis of Sequence-controlled Multiblock Copolymers by Frustrated Lewis Pair: Can the Pandora's Box be Reopened?

Xin-hua Wan

DOI: https://doi.org/10.11777/j.issn1000-3304.2020.20104

2020-01-01

Acta Polymerica Sinica

Abstract:Sequence-controlled polymers have been regarded as a great challenging holy grail to be ultimately achieved in polymer science. However, its synthesis is just like a Pandora's box that is impossible to be reopened due to the lack of efficient synthetic methodologies. More recently, Yuetao Zhang's group at Jilin University has made a big breakthrough in the synthesis of sequence-controlled polymers by using living/controlled frustrated Lewis pair (FLP) polymerization system. FLP composed of organophosphorus superbase and organoaluminum Lewis acid can rapidly incoporate four methacrylic monomers into a tripentacontablock copolymers, which is by far the world's highest record for block numbers (about 2.5 times of the previous record) and the degree of polymerization is 50 per block. This synthetic strategy has several remarkable features such as room-temperature synthesis and easily scale-up to high multigram experiment over 110 grams; simple procedure: no additional initiator or catalyst but only sequential addition of monomer is required for per block copolymerization. It only took 30 min to synthesize such a tripentacontablock copolymers. All these features indicated the very promising prospects of this FLP polymerization system in industry, inspiring the polymer chemists' enthusiasm to reopen the pandora's box.
Sequentially Hetero-functional, Topological Polymers by Step-growth Thiol-yne Approach

Jin Han,Yaochen Zheng,Bo Zhao,Sipei Li,Yuanchao Zhang,Chao Gao

DOI: https://doi.org/10.1038/srep04387

IF: 4.6

2014-01-01

Scientific Reports

Abstract:Sequence-controlled polymers (SCPs) such as DNA and proteins play an important role in biology. Many efforts have been devoted to synthesize SCPs in the past half a century. However, to our knowledge, the artificial sequences containing independently functional groups have never been reported. Here, we present a facile and scalable approach based on radical-initiated step-growth polymerization to synthesize sequence-controlled functional polymers (SCFPs) with various topologies, covering from linear to random and hyperbranched polymers. The functional groups, such as OH/NH2, OH/COOH and NH2/N3, alternately arranged along the chain, which were further selectively functionalized to achieve DNA-mimic and hetero-multifunctional SCPs. This user-friendly strategy exhibits advantages of commercially available monomers, catalyst-free process, fast reaction, high yield and water solvent, opening a general approach to facile and scalable synthesis of SCFPs.
Sequence-defined Oligo/poly(ester-Amide-ester)s Via an Orthogonal Nucleophilic Substitution Reaction and a Passerini Reaction

Yao-Zong Wang,Jia-Chen Wang,Yu-Huan Wu,Chang-Xia Shi,Fu-Sheng Du,Zi-Chen Li

DOI: https://doi.org/10.1038/s41428-019-0272-6

IF: 3.135

2019-01-01

Polymer Journal

Abstract:We report the facile synthesis of sequence-defined, uniform oligo(ester-amide-ester)s, and periodic poly(ester-amide-ester)s composed of ɑ-hydroxy acids and ɑ-amino acids. The synthetic strategy for preparing the oligomers involves two sequential steps with bromoacetic acid and potassium isocyanoacetate as the key building blocks. (1) The first step is a nucleophilic substitution reaction between a bromoacetic ester and potassium isocyanoacetate to generate a new isocyanoacetic ester, (2) and the second is a Passerini reaction of the formed isocyanoacetic ester with an aldehyde and bromoacetic acid to form a longer bromoacetic ester with an ester-amide linkage and a side-group originating from the aldehyde. Repeating this cycle affords sequence-defined uniform oligo(ester-amide-ester)s with different side groups. This strategy efficiently provides uniform, symmetrical oligo(ester-amide-ester)s via an iterative approach. Furthermore, two strategies were examined to obtain sequence-defined periodic poly(ester-amide-ester)s through the polycondensation of different oligomers. The polycondensation based on the nucleophilic substitution of α,ω-bromo carboxylic acids as the oligomer was less effective, while the DIC/DPTS-mediated polycondensation of α,ω-hydroxy carboxylic acids as the sequence-defined oligomer was efficient enough to afford high-molecular-weight periodic poly(ester-amide-ester)s.
Sequence‐Defined Synthesis Enabled by Fast and Living Anionic Monoaddition of Vinyl Monomers

Kazuhiro Okamoto,Dong-eun Yoo,Rikako Yoshioka,Ryohei Nakasato,Yosuke Ashikari,Kenji Kitayama,Aiichiro Nagaki

DOI: https://doi.org/10.1002/anie.202416875

2024-10-17

Angewandte Chemie International Edition

Abstract:The selective monoaddition of polymerizable vinyl monomers like styrenes and methacrylates in a living manner has been achieved for the flash-flow preparation of molecules in a defined sequence with high selectivity. We demonstrated the sequence-defined synthesis of multifunctional molecules using an initiator, functionalized styrenes, diarylethylenes, various methacrylates, and an electrophilic trapping reagent at the living terminus (six-component sequential connection at maximum) without any intermediate purification steps. The anionic living terminus of the vinyl monomers in the flow system described herein is active for polymerization, such that the styrene or methacrylate sequence can be expanded to afford highly dispersed oligomers without affecting other single units, which means that the unequivocal sequences were successfully inserted into the internal or terminal positions. The methodology described herein provides an adaptable method for the construction of new molecular spaces based on unimolecular sequence control and pinpoint functionalization.

chemistry, multidisciplinary

Synthesis Of Sequence-Ordered Polymers Via Sequential Addition Of Monomers In One Pot

Synthesis of Sequence-Controlled Polymers Via Sequential Thiol-Ene and Amino-Yne Click Reactions in One Pot

Sequence-Reversible Construction of Oxygen-Rich Block Copolymers from Epoxide Mixtures by Organoboron Catalysts

Syntheses Of Sequence-Controlled Polymers Via Consecutive Multicomponent Reactions

Controllable Preparation of Complex Polymer Chains and Novel Materials

A Strategy Combining Quantitative Reactions and Reversible-Covalent Chemistry for Sequential Synthesis of Sequence-Controlled Polymers with Different Sequences

Facile One‐Pot Synthesis of New Functional Polymers Through Multicomponent Systems

Synthesis of polymers with on-demand sequence structures via dually switchable and interconvertible polymerizations

Synthesis of copolymer via hybrid polymerization: From random to well-defined sequence

Multistep sequence-controlled supramolecular polymerization by the combination of multiple self-assembly motifs

Sequential Michael addition thiol–ene and radical-mediated thiol–ene reactions in one-pot produced sequence-ordered polymers

Two Tandem Multicomponent Reactions for the Synthesis of Sequence-Defined Polymers

A general approach towards thermoplastic multishape-memory polymers via sequence structure design.

Facile synthesis of multi-block copolymers containing poly(ester-amide) segments with an ordered side group sequence

New Synthetic Strategy for Facile Synthesis of Functional Polymers by One-Pot Combination of Controlled Radical Polymerization and Enzymatic Reaction

Sequence-controlled methacrylic multiblock copolymers via sulfur-free RAFT emulsion polymerization

Novel Synthesis of Long Multi-Block Heteropolymer Chains with an Ordered Sequence and Controllable Block Lengths

The Synthesis of Sequence-controlled Multiblock Copolymers by Frustrated Lewis Pair: Can the Pandora's Box be Reopened?

Sequentially Hetero-functional, Topological Polymers by Step-growth Thiol-yne Approach

Sequence-defined Oligo/poly(ester-Amide-ester)s Via an Orthogonal Nucleophilic Substitution Reaction and a Passerini Reaction

Sequence‐Defined Synthesis Enabled by Fast and Living Anionic Monoaddition of Vinyl Monomers