Abstract:Proton Exchange Membrane (PEM) electrolyzers are a promising technology to produce hydrogen as a clean energy carrier. However, a significant challenge is hydrogen crossover, especially at high pressures (>40 bar) and when utilizing thin (<100 um) membranes. This poses significant safety hazard due to the mixing of H 2 with oxygen, especially in the balance of plant due to higher void volumes. Mitigating membrane crossover is therefore critical to the safety of the entire PEM electrolyzer system. Several research groups have demonstrated preliminary works on the H 2 crossover mitigated membrane for PEM electrolyzers. Klose et al. [1] implemented a Pt interlayer between one piece of NR212 membrane and a piece of N115 membrane. The work showed significant reduction of H 2 crossover in their design compared to the regular PFSA membrane. However, the work only demonstrated the effectiveness of crossover reduction under ambient pressure. Moreover, the spraying method they proposed is not readily scalable. Stahler et al. [2] demonstrated that applying an interlayer between the anode catalyst layer and recombination layer will help to reduce the H 2 crossover. However, this work also failed to demonstrate mitigation at high H 2 pressure. Additionally, each of these methods used Pt/C in the recombination layer. Carbon, though robust in the fuel cell applications may readily oxidize at the higher electrolyzer potentials. This could have consequences on membrane durability. Preliminary data has demonstrated that our proposed mitigate strategy can significantly reduce the H 2 crossover. The MEA with regular NR212 membrane cannot be operated safely under 70 o C under even mild pressure. However, with our addition of the highly efficient recombination layer, the crossover can be dropped to 6% LEL even at 40 bar. This discovery will help to improve the PEM electrolyzer safety dramatically. References: C. Klose et al 2018 J. Electrochem. Soc. 165 F1271 A. Stähler et al 2022 J. Electrochem. Soc. 169 034522

Optimization of membrane stack configuration for efficient hydrogen production in microbial reverse-electrodialysis electrolysis cells coupled with thermolytic solutions.

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

Patterned Ion Exchange Membranes for Improved Power Production in Microbial Reverse-Electrodialysis Cells

Optimization of Membrane Stack Configuration in Enlarged Microbial Desalination Cells for Efficient Water Desalination

Parallel stack scale-up of microbial electrolysis cell for hydrogen production

Efficient Production of Hydrogen Peroxide in Microbial Reverse-Electrodialysis Cells Coupled with Thermolytic Solutions

Development of PEM Electrolyzer Stack and Electrochemical Performance Study on Different Operating Conditions

Optimal Design of Hydrogen Production Processing Coupling Alkaline and Proton Exchange Membrane Electrolyzers

Balancing Water Dissociation and Current Densities to Enable Sustainable Hydrogen Production with Bipolar Membranes in Microbial Electrolysis Cells

Advanced PEM Electrolyzer Membrane for Hydrogen Crossover Mitigation

Optimization of Configurations and Cathode Operating Parameters on Liquid-Cooled Proton Exchange Membrane Fuel Cell Stacks by Orthogonal Method

Formate production from CO2 electroreduction in a salinity-gradient energy intensified microbial electrochemical system

Design of Carbon Dioxide Reduction Electrolysis Stacks and Trial Production of Electrolytic Cell Prototype

Minimal RED Cell Pairs Markedly Improve Electrode Kinetics and Power Production in Microbial Reverse Electrodialysis Cells

Boosting hydrogen production from fermentation effluent of biomass wastes in cylindrical single-chamber microbial electrolysis cell

Energy transition with green hydrogen: Toward computational design of comprehensive proton exchange membrane water electrolysis stacks

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

System level modeling and optimization of high temperature proton exchange membrane electrolyzer system considering recirculated hydrogen as carrier gas

Optimization of Interfacial OH− Accessibility by Constructing a Delayed–Release Membrane Electrode for Ampere–Level Hydrogen Production

Efficient Methane Production from Beer Wastewater in a Membraneless Microbial Electrolysis Cell with a Stacked Cathode: the Effect of the Cathode/Anode Ratio on Bioenergy Recovery

Optimization of membrane thickness for proton exchange membrane electrolyzer considering hydrogen production efficiency and hydrogen permeation phenomenon