Abstract:Currently, fluidization techniques have been widely applied to separate and recover coarse particles (>74 μm) in mineral processing. Studies show that the main parameters affecting this regard are hydrodynamic conditions and interphase interactions. The main objective is to investigate the influences of collision coefficient and drag models on the hydrodynamic behavior of liquid-solid fluid beds. Eulerian-Eulerian method was used and spherical and irregular coarse particles were considered in calculations. In this regard, Gibilaro, Gidaspow, Huilin-Gidaspow, and Syamlal-O' Brien equations were used to obtain the drag force. Moreover, experimental data of particle volume fraction and fluid bed expansion ratio were employed to evaluate the proposed models. The effects of three restitution coefficients (0.85, 0.90 and 0.99) and four specularity coefficients (0.01, 0.10, 0.50 and 0.99) on fluidization characteristics were studied. The results indicate that for spherical and irregular particles, Gidaspow and Hulin-Gidaspow models have good agreement with experimental data in predicting fluid bed expansion ratio and particle volume fraction. Meanwhile, high prediction accuracy can be achieved when the restitution coefficient is 0.9 and the specularity coefficient is 0.1. The results improve the understanding of coarse particle behavior in liquid-solid fluidization and provide useful information for further investigation of three-phase flotation processes.

Numerical Simulation of the Separation of Complicated Particles in Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical studies of the influence of particles' size distribution characteristics on the gravity separation performance of Liquid-solid Fluidized Bed Separator

Simplification and application of particles kinetic equation for liquid-solid fluidized bed separator

Research on Separation Mechanism of Liquid-Solid Fluidized Bed Separator

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

The Numerical Method for Simulations Gas Solid Fluidization System

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Simulation of Particle Mixing and Separation in Multi-Component Fluidized Bed Using Eulerian-Eulerian Method: A Review

Numerical Simulation of Particle Segregation in Dilute Gas-Solid Two-Phase Flow

Simulation of Particle Segregation Behavior in Bubbling Fluidized Bed

Simulation of Hydrodynamics of Particles in a Liquid-Solid Fluidized Bed

Numerical Simulation of Bubble and Particles Motions in a Bubbling Fluidized Bed Using Direct Simulation Monte-Carlo Method

Numerical Simulation for Fluid Dynamics in a Gas-solid Fluidized Bed

Numerical Simulation on the Distribution Characteristics of Flexible Slender Particles in a Circulating Fluidized Bed

Experimental and CFD simulation study on interphase interaction of the fluidization behavior for spherical and irregular coarse particles

Discrete Particle Simulation of Bubbling Behavior in a Gas-Solid Fluidized Bed

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Numerical Prediction of Flow Hydrodynamics of Wet Molecular Sieve Particles in a Liquid-Fluidized Bed

Numerical Simulation of the Flow Field in a Circulating Fluidized Bed Desulfurizer and Its Gas-solid Separation Characteristics