Abstract:Surface properties of montmorillonite (MMT) and its adsorption characteristics for heavy metals have been investigated with nickel and copper as sorbate from aqueous solutions. Employing the potentiometric and mass titration techniques in batch experimental methods, the point of zero charge (PZC) and point of zero net proton charge (PZNPC) of MMT edges at different ionic strengths present pH(PZC) and pH(PZNPC) to be 3.4+/-0.2. A crossing point was observed for the proton adsorption vs. pH curves at different ionic strengths of KCl electrolyte and in investigating MMT remediation potentialities as sorbent for heavy metals polluted waters, the effects of heavy metal concentration, pH, MMT dosage, reaction time and temperature for Cu(2+) and Ni(2+) uptake were studied. The sorption of metal ions by MMT was pH dependent and the adsorption kinetics revealed sorption rate could be well fitted by the pseudo-second-order rate model. The data according to mass transfer and intraparticle diffusion models confirmed diffusion of solutes inside the clay particles as the rate-controlling step and more important for the adsorption rate than the external mass transfer. Adsorption isotherms showed that the uptake of Cu(2+) and Ni(2+) could be described by the Langmuir model and from calculations on thermodynamic parameters, the positive Delta G degrees values at different temperatures suggest that the sorption of both metal ions were non-spontaneous. Change in enthalpy (Delta H degrees) for Ni(2+) and Cu(2+) were 28.9 and 13.27 kJ/mol K respectively, hence an endothermic diffusion process, as ion uptake increased with increase in temperature. Values of DeltaS degrees indicate low randomness at the solid/solution interface during the uptake of both Cu(2+) and Ni(2+) by MMT. Montmorillonite has a considerable potential for the removal of heavy metal cationic species from aqueous solution and wastewater.

Evaluation of Cs+ removal from aqueous solution by adsorption on ethylamine-modified montmorillonite

Adsorption Property of Cesium Onto Modified Macroporous Silica–Calix[4]arene-crown Based Supramolecular Recognition Materials

Uptake Of Cesium And Some Typical Metals Onto Hybrid Calix[4]Crown Adsorbent With Silica Carrier By Host-Guest Recognition

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

Behavior and analysis of Cesium adsorption on montmorillonite mineral.

Efficient removal of cesium from aqueous solution with vermiculite of enhanced adsorption property through surface modification by ethylamine.

Adsorption of cesium by vermiculite

Efficient Removal of Co2+ from Aqueous Solution by 3-Aminopropyltriethoxysilane Functionalized Montmorillonite with Enhanced Adsorption Capacity.

The adsorption of Cs+ from wastewater using lithium-modified montmorillonite caged in calcium alginate beads

Characterization of Organo-Montmorillonites and Comparison for Sr(II) Removal: Equilibrium and Kinetic Studies

The adsorption of cesium by sulfonic acid functionalized hollow mesoporous silica microspheres

Adsorption Efficiency, Thermodynamics, and Kinetics of Amino-Functionalized Mesoporous Calcium Silicate for the Removal of Heavy Metal Ions

Adsorption of Cu(II), Cd(II) and Cr(III) Ions from Aqueous Solutions on Humic Acid Modified Ca-montmorillonite

Removal of Cd2+ from Aqueous Solution by Adsorption Using Fe-montmorillonite.

Study on adsorptive property of bentonite for cesium

Adsorption of arsenic on modified montmorillonite

A comparative study on the Cs adsorption/desorption and structural changes in different clay minerals

ION-EXCHANGE MODELING OF DIVALENT CATION ADSORPTION ON SWy-3 MONTMORILLONITE

Montmorillonite surface properties and sorption characteristics for heavy metal removal from aqueous solutions

Adsorption of Cu~(2+) and Cd~(2+) by SDS-modified montmorillonite

Adsorption of anionic dye onto homoionic montmorillonite: effect of the exchangeable cation on the adsorption