Abstract:Electrochromic devices are applied extensively to camouflages, smart windows, heat insulation layers, and automobile rearview mirrors, etc. The amorphous WO 3 is a very attractive electrochromic material, whereas it suffers from degradation of optical modulation and reversibility on ion exchange owing to those deep trapped ions with irreversible reaction behavior. Herein, we designed and, by using magnetron sputtering, prepared a composite film with TiO 2 /WO 3 /TiO 2 double heterojunctions, which is capable of eliminating the deep trapped ions by itself under ultraviolet light (UV) assistance. The electrochromic device based on this composite film, after being recovery by short-time UV irradiation, can maintain a high transmission modulation of 94.72% after 7000 cycles of the voltammetry measurement. This feature allows the device to maintain its initial electrochromic performance after prolonged use. Moreover, the double heterojunction structure can reduce colouring time and enormously improve the colouration efficiency (CE) of electrochromic devices. Experimental research shows that when the thickness of the bottom and upper TiO 2 layer of the WO 3 film was 145.5 nm and 97.0 nm, respectively, the CE of electrochromic devices reached a perfectly high value (479.3 cm 2 /C), being much higher than that of WO 3 devices (69.5 cm 2 /C). Functions of the TiO 2 /WO 3 /TiO 2 double heterojunction in electrochromic device were investigated by combining theoretical analysis and experiment validation, and these results provide a general framework for developing and designing superior electrochromic materials and devices.

Hierarchical Structure Ti-Doped Wo3 Film with Improved Electrochromism in Visible-Infrared Region

Hierarchical Structure WO3/TiO2 Complex Film with Enhanced Electrochromic Performance

Study on the Structure and Electrochromism of WO<sub>3</sub> and Ti-Doped WO<sub>3</sub> Films

Building Architecture of TiO2 Nanocrystals Embedded in Amorphous WO3 Films with Improved Electrochromic Properties

Topotactic Layer-to-tunnel Crystallization for H-Wo3 Films with Enhanced Electrochromic Performance

Dual-band Electrochromic Film Based on Mesoporous H-Wo3/o-wo3·h2o/r-tio2 for High Performance Smart Windows

Electrochromic performance of WO3 films: optimization by crystal network topology modification

Improvement of Electrochromic Performance by Embedding ITO Nanocrystals in Amorphous WO3 Film

Crystalline/amorphous Tungsten Oxide Core/shell Hierarchical Structures and Their Synergistic Effect for Optical Modulation.

Enhanced Electrochromic Properties by Improvement of Crystallinity for Sputtered WO3Film

Controllable synthesis of hexagonal WO<sub>3</sub> nanorod-cluster films with high electrochromic performance in NIR range

Effects of Ti-doping amount and annealing temperature on electrochromic performance of sol-gel derived WO3

Morphology-Dependent Near-Infrared Electrochromic Properties of Tungsten Oxide

Enhanced Electrochromic Switches And Tunable Green Fluorescence Based On Terbium Ion Doped Wo3 Films

High-performance electrochromic WO3 film driven by controllable crystalline structure and its all-solid-state device

Construction of TiO2/WO3/TiO2 double heterojunction films for excellent electrochromic performance

Electrochromic Properties of WOx -Ti Films

Growth of Vertically Aligned Hierarchical WO3 Nano-Architecture Arrays on Transparent Conducting Substrates with Outstanding Electrochromic Performance

Improvement on optical modulation of WO3 with a hierarchical structure of amorphous-crystalline nanowires

Investigation on the Properties and Mechanism of W-Doped TiO<sub>2</sub> Electrochromic Films Deposited by Cosputtering

Titanium dioxide/tungsten trioxide nanoarrays film for high electrochromic performance