Abstract:To address the drawbacks of inadequate energy density as well as utilization effectiveness in solar energy utilization, phase change energy storage offers a possible option. However, the low thermal conductivity of traditional phase change materials (PCMs) restricts the extent to which solar energy utilization can be enhanced. In this paper, the impact of the metal foam (MF) on the solid–liquid interface, the flow field, the enhancement heat transfer mechanism during the paraffin wax (PX) melting process and thermal storage characteristics was analyzed. Besides, a three-dimensional mathematical model of MF-PX using the hybrid mesh technique was established and software ANSYS-FLUENT was used for simulation. The results indicated that, the hybrid mesh exhibited a reduction of 52.75 % in mesh count compared to the unstructured mesh, resulting in 45 % reduction in computational time. Moreover, the hybrid mesh also showcased improved mesh quality that the unstructured mesh was mainly distributed in the range of 0.48–0.6, while within the range of 0.84–1.0 for the hybrid mesh. More important, the maximum relative error between experimental and simulation was 8.67 %, indicating that the model can make a reasonable prediction. With the proportions of MF increased from 0.11 % to 0.43 %, both the Rayleigh number (Ra) and its amplification decreased. At 800 s, the Ra decreased from 1.76E+07 to 1.20E+07, while the amplification of the Ra was reduced from 1.88E+07 to 1.30E+07. In addition, the natural convection proportions of CMF decreased from 96.31 % to 80.65 %. These observations indicated that natural convection was the primary heat transfer mechanism, and the conduction was enhanced by the increasing proportion of MF. Finally, in terms of heat storage characteristics, the heat storage capacity and heat storage rate of the composite PCM slightly decreased. The heat storage values decreased from 19.30 kJ to 18.66 kJ. Similarly, the heat storage rates decreased from 19.86 J/s to 18.81 J/s.

Porous Silica Matrices Infiltrated with Pcm for Thermal Protection Purposes

Enhanced Thermal Management with Microencapsulated Phase Change Material Particles Infiltrated in Cellular Metal Foam

Microencapsulated Phase Change Material (MEPCM) Saturated in Metal Foam As an Efficient Hybrid PCM for Passive Thermal Management: A Numerical and Experimental Study

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Evaluation and optimization on heat transfer performance of a composite phase change material embedded in porous ceramic skeleton: A lattice Boltzmann study

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

A Pore Scale Study on Heat Transfer Characteristics of Integrated Thermal Protection Structures with Phase Change Material

Experimental Investigations on Heat Transfer in Phase Change Materials (pcms) Embedded in Porous Materials

Heat Transfer of Phase Change Materials (pcms) in Porous Materials

Thermo-Mechanical Analysis of Ceramic Encapsulated Phase-Change-Material (pcm) Particles

Numerical Study on the Thermal Behavior of Phase Change Materials (pcms) Embedded in Porous Metal Matrix

Heat Transfer Enhancement Of Phase Change Materials (Pcms) In Low And High Temperature Thermal Storage By Using Porous Materials

Experimental and numerical assessments of thermal transport in phase change material embedding additively manufactured triply periodic minimal surfaces: A comparative evaluation

Interfacial Nanolayer Effect on Thermophysical Properties of Silica-Paraffin Phase Change Material - A Molecular Dynamics Simulation

Pore scale simulation for melting of composite phase change materials considering interfacial thermal resistance

Evaporation limited capillary penetration in porous media

Simulation of PCM‐saturated porous solid matrix for thermal energy storage using the phase‐field method

Fluid Flow and Heat Transfer in a Latent Thermal Energy Unit with Different Phase Change Material (PCM) Cavity Volume Fractions

Pore Structure Modification of Silica Matrix Infiltrated with Paraffin As Phase Change Material

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Silica-based aerogels encapsulate organic/inorganic composite phase change materials for building thermal management