Abstract:Lately, membrane with asymmetric properties of its two sides has shown promising potential in direct contact membrane distillation (DCMD) application, based on the fact that the hydrophilic side of the asymmetric membrane can effectively mitigate wetting and fouling, while the hydrophobic layer facilitate transportation of water vapor to realize separation. We here report an asymmetric membrane prepared via a facile method of vapor induced phase separation (VIPS). Namely, hydrophobic polymer of poly(styrene-block-butadiene-block-styrene) (SBS) and hydrophilic cellulose acetate (CA) were co-dissolved in tetrahydrofuran, and then cast in an ethanol vapor atmosphere to evaporate solvent. After solvent evaporation (within 10 min), the obtained membrane was observed with scanning electron microscope (SEM) to indicate even microstructure of porous network matrix with nodular morphology, and its top surface consisted of SBS only, while microspheres of CA were found to be evenly embedded in the SBS matrix at the bottom side layer. The membrane was further treated with NaOH aqueous solution for CA deacetylation, which was confirmed by attenuated total reflection Fourier transform infrared spectroscopy, SEM and water contact angle (WCA) analyses. The deacetylated CA exposes OH groups to decrease the WCA of the bottom surface greatly. As a result, an asymmetric membrane with large difference in WCA between the top surface and the bottom surface has been obtained. The asymmetric membrane was employed for DCMD to separate an oily saline emulsion containing n-hexadecane, surfactant of Tween 80, and NaCl. The stable flux and high salt rejection of the asymmetric membrane indicate excellent resistance to wetting and fouling, which is attributed to the hydration layer formed by the OH groups of the deacetylated CA at the bottom surface of the membrane. The facile strategy reported in this work implies possible large scale production of the asymmetric membrane that is suitable for membrane distillation application.

Preparation of Polysulfone Membranes Via Vapor-Induced Phase Separation and Simulation of Direct-Contact Membrane Distillation by Measuring Hydrophobic Layer Thickness

Preparation and Characterization of PVDF/nonwoven Fabric Flat-Sheet Composite Membranes for Desalination Through Direct Contact Membrane Distillation

Fabrication of PVDF Hollow Fiber Membranes Via Integrated Phase Separation for Membrane Distillation

Preparation and characterization of hydrophobic PVDF membranes by vapor-induced phase separation and application in vacuum membrane distillation

Dual-Biomimetic Superhydrophobic Electrospun Polystyrene Nanofibrous Membranes for Membrane Distillation

Polysulfone Membranes Via Thermally Induced Phase Separation

Preparation of an Asymmetric Membrane Via Vapor Induced Phase Separation for Membrane Distillation

Preparation and modification of PVDF membrane via VIPS method for membrane distillation

PVDF membranes for membrane distillation prepared by VIPS – A combined study of artificial water channel effectiveness and membrane performance prediction

One-step Fabrication of Isotropic Poly(vinylidene Fluoride) Membranes for Direct Contact Membrane Distillation (DCMD)

Fabrication and Characterization of Superhydrophobic Poly (vinylidene Fluoride) Membrane for Direct Contact Membrane Distillation

Structuring and characterization of a novel microporous PVDF membrane with semi-interpenetrating polymer networks for vacuum membrane distillation

PDMS/PVDF Microporous Membrane with Semi‐interpenetrating Polymer Networks for Vacuum Membrane Distillation

Preparation of Hydrophobic PVDF Hollow Fiber Membranes for Desalination Through Membrane Distillation.

Preparation of polysulfone-based nanofiber Janus membrane for membrane distillation containing organic pollutants

Preparation and characterization of PDMS-PVDF hydrophobic microporous membrane for membrane distillation

Preparation of Omniphobic PVDF Membrane with Hierarchical Structure for Treating Saline Oily Wastewater Using Direct Contact Membrane Distillation

SiO2-PDMS-PVDF Hollow Fiber Membrane with High Flux for Vacuum Membrane Distillation

Effect of Spinning Conditions on the Structure and Performance of Hydrophobic PVDF Hollow Fiber Membranes for Membrane Distillation

Engineering the Re-Entrant Hierarchy and Surface Energy of PDMS-PVDF Membrane for Membrane Distillation Using a Facile and Benign Microsphere Coating.

Poly(vinylidene Fluoride-Co-hexafluoro Propylene) Membranes Prepared Via Thermally Induced Phase Separation and Application in Direct Contact Membrane Distillation