Abstract:Aqueous rechargeable zinc batteries are very attractive for energy storage applications due to their low cost and high safety. However, low operating voltages limit their further development. For the first time, this work proposes a unique approach to increase the voltages of aqueous zinc batteries by using tri‐functional metallic bipolar electrode with good electrochemical activity and ultrahigh electronic conductivity, which not only participates in redox reactions, but also functions as an electrical highway for charge transport. Furthermore, bipolar electrode can replace expensive ion selective membrane to separate electrolytes with different pH; thus, redox couples with higher potential in acid condition and Zn/Zn(OH)42‐ couple with lower potential in alkaline condition can be employed together, leading to high voltages of aqueous zinc batteries. Herein, two types of metallic bipolar electrodes of Cu and Ag are utilized based on three kinds of aqueous zinc batteries: Zn–MnO2, Zn–I2, and Zn–Br2. The voltage of aqueous Zn–MnO2 battery is raised to 1.84 V by employing one Cu bipolar electrode, which shows no capacity attenuation after 3500 cycles. Moreover, the other Ag bipolar electrode can be adopted to successfully construct Zn–I2 and Zn–Br2 batteries exhibiting much higher voltages of 2.44 and 2.67 V, which also show no obvious capacity degradation for 1000 and 800 cycles, representing decent cycle stability. Since bipolar electrode can be applied in a large family of aqueous batteries, this work offers an elaborate high‐voltage concept based on tri‐functional metallic bipolar electrode as a model system to open a door to explore high‐voltage aqueous batteries. Metallic bipolar electrode with both electrochemical reaction activity and good electronic conductivity is employed to improve the voltage of aqueous batteries for the first time. The voltages of aqueous Zn–MnO2, Zn–I2, and Zn–Br2 batteries are raised to 1.84, 2.44, and 2.67 V, respectively, which also show good cycling stability.

High-Voltage Aqueous Battery Approaching 3 V Using an Acidic-Alkaline Double Electrolyte

A High Energy Density Aqueous Battery Achieved by Dual Dissolution/Deposition Reactions Separated in Acid‐Alkaline Electrolyte

Aqueous Alkaline–acid Hybrid Electrolyte for Zinc-Bromine Battery with 3V Voltage Window

Jahn–Teller Distortion Induced Mn2+‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

Jahn–Teller Distortion Induced Mn 2+ ‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

Immiscible phase-separation electrolyte and interface ion transfer electrochemistry enable zinc/lithium hybrid batteries with 3.5 V-class operating voltage

High‐Voltage Aqueous Zinc Batteries Achieved by Tri‐functional Metallic Bipolar Electrodes

An Electrolytic Zn–MnO 2 Battery for High‐Voltage and Scalable Energy Storage

All-in-one and Bipolar-Membrane-free Acid-Alkaline Hydrogel Electrolytes for Flexible High-Voltage Zn-air Batteries

Aqueous All-Manganese Batteries

Ultralow‐Salt‐Concentration Electrolyte for High‐Voltage Aqueous Zn Metal Batteries

High-Voltage Aqueous Magnesium Ion Batteries

Improved Mn4+/Mn2+ Contribution in High‐Voltage Zn–MnO2 Batteries Enabled by an Al3+‐Ion Electrolyte

An Electrolytic Zn–MnO2 Battery for High‐Voltage and Scalable Energy Storage

A High-Voltage Zn-Air Battery Based on an Asymmetric Electrolyte Configuration

A Na 3 V 2 (PO 4 ) 2 O 1.6 F 1.4 Cathode of Zn‐Ion Battery Enabled by a Water‐in‐Bisalt Electrolyte

A High‐Voltage Zn–Organic Battery Using a Nonflammable Organic Electrolyte

Aqueous MnV 2 O 6 ‐Zn Battery with High Operating Voltage and Energy Density

Nonflammable Fluorinated Electrolyte Realizing High Voltage Anode‐Free Zn Dual‐Ion Batteries

Carbonate Ester-Based Electrolyte Enabling Rechargeable Zn Battery to Achieve High Voltage and High Zn Utilization.

High-concentration dual-complex electrolyte enabled a neutral aqueous zinc-manganese electrolytic battery with superior stability