Abstract:In this work, LiFePO₄/C composite were synthesized via a green route by using Iron (III) oxide (Fe₂O₃) nanoparticles, Lithium carbonate (Li₂CO₃), glucose powder and phosphoric acid (H₃PO₄) solution as raw materials. The reaction principles for the synthesis of LiFePO₄/C composite were analyzed, suggesting that almost no wastewater and air polluted gases are discharged into the environment. The morphological, structural and compositional properties of the LiFePO₄/C composite were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Raman and X-ray photoelectron spectroscopy (XPS) spectra coupled with thermogravimetry/Differential scanning calorimetry (TG/DSC) thermal analysis in detail. Lithium-ion batteries using such LiFePO₄/C composite as cathode materials, where the loading level is 2.2 mg/cm², exhibited excellent electrochemical performances, with a discharge capability of 161 mA h/g at 0.1 C, 119 mA h/g at 10 C and 93 mA h/g at 20 C, and a cycling stability with 98.0% capacity retention at 1 C after 100 cycles and 95.1% at 5 C after 200 cycles. These results provide a valuable approach to reduce the manufacturing costs of LiFePO₄/C cathode materials due to the reduced process for the polluted exhaust purification and wastewater treatment.

High purity lithium iron phosphate/carbon composites prepared by using secondary lithium source

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Electrochemical property of LiFePO4/C composite cathode with different carbon sources

Extra Li-ion storage of LiFePO4/C composite materials synthesized with Fe1.5P

Graphite-Embedded Lithium Iron Phosphate for High-Power-Energy Cathodes

Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation of LiFePO₄/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Excessive Iron Source on the Structural and Electrochemical Properties of LiFePO<sub>4</sub>/C Composite

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Preparing carbon coated lithium ferrous phosphate using mixed iron sources

LiFePO4/C composites with high compaction density as cathode materials for lithium-ion batteries with high volumetric energy density

Flocculant-assisted synthesis of Fe2O3/carbon composites for superior lithium rechargeable batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries