Abstract:Vanadium and nickel are the most abundant and troublesome metal compounds present in the organic portions of fossil fuel deposits. These metal compounds may cause significant detrimental impact during refining processes, leading to the deactivation of catalysts used for sulfur and nitrogen removal. Therefore, it is highly desirable to remove vanadium and nickel from petroleum fractions before catalytic hydrogenation and cracking. Vanadium and nickel complexes generally have been classified into porphyrins and non-porphyrins. Studies of the porphyrins have focused extensively on their isolation and identification since their discovery in crude oils and shales. Although it was proposed that non-porphyrins will contain atypical porphyrin or pseudo aromatic tetradentate systems, no non-porphyrin molecules have been identified in crude oil. Ultraviolet–visible (UV–vis) spectroscopy and mass spectrometry are the common analytical techniques used to identify and quantify porphyrins. Due to the high intensity and sensitivity of electronic absorption of UV–vis radiation by porphyrins, approximately half of the vanadium and nickel porphyrins can be identified and quantified by their characteristic UV–vis spectra. The remaining vanadium and nickel compounds, the non-porphyrins, are defined by an absence of distinct UV–vis spectroscopic bands. However, the results of X-ray absorption fine structure (EXAFS) spectroscopy and X-ray absorption near-edge structure (XANES) spectroscopy indicated that these non-porphyrins are indeed still bound in a porphyrinic structure, although these metal compounds do not exhibit the characteristic UV–visible absorption. In addition, the recent results of mass spectrometry showed that majority of vanadium and nickel compounds existed in the form of porphyrins, including alkyl porphyrins, sulfur-containing porphyrins, nitrogen-containing porphyrins, and oxygen-containing porphyrins. The porphyrins with O, S, and N atoms should associate more strongly with the asphaltenes than the less polar components. Formation of complexes with other components would shift and attenuate the Soret absorption in UV–visible spectroscopy. The porphyrins are generally believed to chelate or non-covalently associate with aromatic asphaltene components by π–π interactions. Therefore, a portion of the vanadium and nickel compounds give strong optical absorption in the Soret band at ca. 400 nm, and the remainder do not, likely due to formation of complexes or due to chemical modification of the porphyrin ring. The implications of their chemical environments for alternative separation methods are important. In this review article, the current understanding of the forms of vanadium and nickel compounds in heavy petroleum is critically discussed and the methods of separation and demetallization evaluated. Effective separation and ultrahigh mass resolution are needed to resolve these vanadium and nickel compounds. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS), which has the highest available broadband mass resolution, mass resolving power, and mass accuracy, is shown to be a significant method for the qualitative analysis of vanadium and nickel compounds in oil fractions.

Distribution of Nickel and Vanadium in Venezuela Crude Oil

Comparative Study on Hydrotreating of Venezuela De-Asphalted Oil: Conversion Behavior of Heteroatom Compounds and HDM Catalyst Deactivation

Porphyrins in Heavy Petroleums: A Review

Research On Porphyrin And Non-Porphyrin Nickel Distribution In Daqing Vacuum Residue And Its Cracked Residue.

Extraction of Ni and V from petroleum using ionic liquids: A promising approach

Vanadium and Nickel Recovery from the Products of Heavy Petroleum Feedstock Processing: A Review

Recovery of Vanadium and Nickel from Oil Fly Ash

A critical review on extraction and refining of vanadium metal

Study of Forms of Compounds of Vanadium and Other Elements in Samples of Pyrometallurgical Enrichment of Ash from Burning Oil Combustion at Thermal Power Plants

Study of Vanadium as Active Component of Hydrotreating Catalysts Ⅱ The Effect of Vanadium on Residue Hydrotreatment of NiMo/Al2O3 Catalysts

Non-chromatographic method for separation and determination of Fe, Ni and V porphyrins in crude oil

Recovery of vanadium and nickel from spent-residue oil hydrotreating catalyst by direct acid leaching-solvent extraction

Deep Conversion of Venezuela Heavy Oil via Integrated Cracking and Coke Gasification–Combustion Process

Study on the high-efficiency separation of Fe in extracted vanadium residue by sulfuric acid roasting and the solidification behavior of V and Cr

Analysis of the viscosity reduction of crude oil with nano-Ni catalyst by acoustic cavitation

In-situ prepared dispersed Co and Ni catalysts for heavy oil upgrading: effect of Ni, Co, and acetone on product composition

Recovery and Separation of Vanadium, Nickel, and Molybdenum from the Industrial Waste of a Petroleum Refinery by a Complexation Method

Die Extraktion von Vanadin mit 4-Methyl-2-pentanol

Processing of vanadium: a review

Dynamic Ni/V Ratio in the Ship-Emitted Particles Driven by Multiphase Fuel Oil Regulations in Coastal China

Recovery of vanadium from direct acid leaching solutions of weathered crust vanadium‐titanium magnetite via solvent extraction with N235