Abstract:The removal of toxic heavy metals, which are usually complexed with organic ligands in real wastewater, is still a challenge currently. The green oxidant O3 has been widely applied in the oxidation of pollutants, but suffers from the dependency of HO· yield on water chemistry and also low recovery of metals. Here, we developed a new method, namely electrolysis-O3-GF-Ti, for efficiently removing the complexed Cu(II) via HO· oxidation and for simultaneously recovering Cu using graphite felt coated Ti mesh (GF-Ti) as the cathode. For Cu(II)-EDTA decomplexation, this process achieved more than 80% of TOC removal and 90% of Cu(II) recovery, which was significantly more efficient than those of electrolysis, ozonation or electrolysis-O3-Ti. The cathodic O3 reduction was responsible for the efficient production of HO· in the process, as proved by the simultaneous enhanced decomposition of O3 and degradation of HO· probe (p-chlorobenzoic acid) but insignificant formation of H2O2 by electrolysis. Mechanism study with HPLC spectrum and mass spectrometry evidence combined with SEM-EDX and XRD analysis revealed electrolysis-O3-GF-Ti of Cu(II)-EDTA was a stepwise decarboxylation process, and the formed decomplexed Cu(II) intermediates were reduced as Cu0 at the GF-Ti surface. The results of cathodic characterization and continuous 5-cycle experiments demonstrated GF-Ti is an excellent renewable cathode. Moreover, over 90% of Cu was recovered in treatment of Cu(II) complexed with different chelators (nitrilotriacetic acid, citrate, tartrate, etc.), and more than 80% from authentic electroplating wastewater. This study would provide a promising alternative for destruction of metal complexes and recovery of heavy metals.

Oxidation of Cu(II)-EDTA in Supercritical Water—experimental Results and Modeling

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Coupled Cu(II)-EDTA Degradation and Cu(II) Removal from Acidic Wastewater by Ozonation: Performance, Products and Pathways

Kinetics of Aniline Oxidation in Supercritical Water

Experimental research on medical wastewater disposal by supercritical water oxidation

Enhancement of Supercritical Water Oxidation for Municipal Sludge Degradation

Municipal Solid Waste Leachates Destruction and Metals Recovery by Supercritical Water Oxidation

Partial Oxidative Gasification of Coking Wastewater in Supercritical Water

Oxidative Degradation of Lurgi Coal-Gasification Wastewater with Mn2o3, Co2o3, and Cuo Catalysts in Supercritical Water

Photocatalytic Degradation of EDTA with UV/Cu(II)/H2O2process

Experimental and Kinetic Modeling Study of Acetic Acid Oxidation and Hydrolysis in Supercritical Water

Parameter Optimization of Excess Sludge Treatment by Supercritical Water Oxidation

Preparation, characterization, and catalytic activity of a novel MgO/expanded graphite for ozonation of Cu-EDTA

Sub- and Super-Critical Water Oxidation of Wastewater Containing Organic and Heavy Metallic Pollutants and Recovery of Superfine Metallic Particles

Supercritical Water Oxidation of Dyeing Sludge

Modeling for Predicting Copper Ion Removal from Aqueous Solution by the Fluidized Adsorption Based on Dimensional Analysis

Effect of continuously dosing Cu(II) on pollutant removal and soluble microbial products in a sequencing batch reactor.

Anoxic iron electrocoagulation automatically modulates dissolved oxygen and pH for fast reductive decomplexation and precipitation of Cu(II)-EDTA: The critical role of dissolved Fe(II)

Efficient removal of Cu-EDTA complexes from wastewater by combined electrooxidation and electrocoagulation process: Performance and mechanism study

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Equilibrium Thermodynamics of Ammonia Oxidation in Supercritical Water