Abstract:Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising ecofriendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 +/- 1.3 and 17.3 +/- 6.8 U, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 +/- 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during longterm operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Using A Glass Fiber Separator in A Single-Chamber Air-Cathode Microbial Fuel Cell Shortens Start-Up Time and Improves Anode Performance at Ambient and Mesophilic Temperatures

Separator Characteristics for Increasing Performance of Microbial Fuel Cells

The use of nylon and glass fiber filter separators with different pore sizes in air-cathode single-chamber microbial fuel cells

Unlaminated Carbon As Separator In Air-Cathode Single-Chamber Microbial Fuel Cells

Comparison of Sulfide Removal and Electricity Generation in Microbial Fuel Cells

Mitigating External and Internal Cathode Fouling Using a Polymer Bonded Separator in Microbial Fuel Cells.

Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes.

Air-cathode structure optimization in separator-coupled microbial fuel cells.

Cathodic Biofouling Control by Microbial Separators in Air-Breathing Microbial Fuel Cells

Poly(vinyl alcohol) separators improve the coulombic efficiency of activated carbon cathodes in microbial fuel cells

Influence of Coulombic Efficiency in Air-Cathode Microbial Fuel Cell by Temperature and Baffle-Microfiltration Membrane Barrier

Improving Startup Performance with Carbon Mesh Anodes in Separator Electrode Assembly Microbial Fuel Cells

Improved Performance of Single-Chamber Microbial Fuel Cells Through Control of Membrane Deformation.

Performance Improvement of MFCs by Treatment of Carbon Cloth Anode with Ultrasonic or Spent Anolyte

Recent advances in the separators for microbial fuel cells.

Effect of temperature on the performance of air-cathode single chamber microbial fuel cells (MFCs)

Quick start-up and performance of microbial fuel cell enhanced with a polydiallyldimethylammonium chloride modified carbon felt anode

Electrochemical analysis of separators used in single-chamber, air-cathode microbial fuel cells

Effect of Nitrate on Electricity Generation in Single-Chamber Air Cathode Microbial Fuel Cells

Stable Operation of Microbial Fuel Cells at Low Temperatures (5–10 °C) with Light Exposure and Its Anodic Microbial Analysis

Electricity generation of single-chamber microbial fuel cells at low temperatures.