Abstract:A 3D time dependent numerical study was performed to study the gas–liquid–solid three-phase flow dynamics in bubble columns by employing the Eulerian–Eulerian–Eulerian three-fluid approach. The three-phase bubble column of Gandhi et al. (Powder Technol. 1999, 103 (2), 80–94), Rampure et al. (Can. J. Chem. Eng. 2003, 81 (3–4), 692–706) and our previous study (Powder Technol. 2014, 260, 27–35) were studied. A mathematical model of a gas–liquid–solid three-phase flow was built. The effect of numerical schemes (wall boundary conditions, momentum discretization schemes and time steps) was discussed. CFD simulations were performed to study the sensitivity of the interphase drag models (different liquid–solid, gas–solid and gas–liquid drag models), and the predictions were compared with the experiments. The results showed that no-slip conditions for the wall boundary conditions, 0.001s for the calculation time step and second-order Upwind for momentum discretization, had better prediction results. The appropriate interphase drag forces to describe the three phase flow found in this study were the Zhang–Vanderheyden model, which was used as a gas–liquid drag model, Schiller–Naumann model, used as a liquid–solid drag model, and gas–solid drag force, which was not considered. The appropriate numerical schemes and interphase drag models were utilized to simulate the hydrodynamic parameters (time-averaged gas holdup, solid holdup, liquid axial velocity) in a gas–liquid–solid bubble column. The effects of superficial gas velocity, particle volume fraction, particle size and density were analysed and discussed. Four flow regimes of a gas–liquid–solid bubble column were simulated; the CFD results were compared with the experimental flow structures, and it was found that the bubble coalescence regime was better depicted. Superficial gas velocity had a large effect on the gas holdup of the bed, and the effect of solid volume fraction (Vs=0.03–0.30) and particle size (dp=75μm–270μm) on the distributions of time-averaged solid holdup and liquid axial velocity was greater than that of particle density (ρp=2500kg/m3–4800kg/m3). When particle size dp≥150μm and solid volume fraction Vs≥0.09, the hydrodynamic parameters had a strong dependency on dp and Vs. The larger the values of the Vs, dp and ρp were, the larger the axial solid concentration gradient was.

CFD Analysis of Inter-Phase Forces in a Bubble Stirred Vessel

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

CFD simulation of bubble column with vertical bundle internals

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

CFD Simulation of Gas-Liquid Flow in Bubble Column

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

CFD modeling of hydrodynamic characteristics of a gas-liquid two-phase stirred tank

CFD analysis of the air-water bubbly flow in a multiphase rotordynamic pump impeller

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Experimental And Numerical Study Of Bubble Drag Reduction On A Flat Plate

Interphase Force Analysis for Air-Water Bubbly Flow in a Multiphase Rotodynamic Pump

CFD Simulation of Average and Local Gas–Liquid Flow Properties in Stirred Tank Reactors with Multiple Rushton Impellers

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Numerical Analysis for Interphase Forces of Gas-Liquid Flow in a Multiphase Pump

Effect of Virtual Mass Force on the Mixed Transport Process in A Multiphase Rotodynamic Pump

Stream-Wise Distribution of Skin-Friction Drag Reduction on A Flat Plate with Bubble Injection

Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor

Numerical Investigation on Effects of Interphase Force Closures on Liquid‐phase Turbulence and Microbubbles Distribution in Vertical Upward Channel Bubbly Flow

CFD–PBM Simulation on Bubble Size Distribution in a Gas–Liquid–Solid Flow Three-Phase Flow Stirred Tank

CFD simulation of hydrodynamics of gas–liquid–solid three-phase bubble column

CFD Simulation of Hydrodynamics in a High-Pressure Bubble Column Using Three Optimized Drag Models of Bubble Swarm