Abstract:The electro-Fenton oxidation process for the degradation of organic pollutants in recalcitrant wastewater has garnered significant attention and research efforts in the field of advanced water treatment. This is primarily due to its highly effective degradation capabilities and the advantages it offers, including the avoidance of unsafe transportation and storage of hydrogen peroxide (H2O2). 2 O 2 ). However, challenges such as relatively high energy consumption, complex operational requirements, and limited operational stability continue to pose significant economic constraints on the widespread application of electro-Fenton technology in water purification. In this study, we employed a secondary hydrothermal method to construct a multi-layered CNT/MoS2/Fe3O4 2 /Fe 3 O 4 composite heterostructure in situ. Leveraging the synergistic effects of the introduced variable valence elements, Fe and Mo, and the interconnected multi-layered membrane structure, the CNT/MoS2/Fe3O4 2 /Fe 3 O 4 electro-Fenton membrane holds promise in a permeable filtration system. Under the conditions of a current density of 1.50 mA/cm2 2 and an electrolyte concentration of 0.50 mol/L, the CNT/MoS2/Fe3O4 2 /Fe 3 O 4 composite membrane exhibited a degradation efficiency of over 90.00% for 100.00 mg/L RhB within 10 minutes, and the degradation rate approached nearly 99.00% at 60 minutes. Furthermore, the degradation efficiency for various recalcitrant organic dye wastewaters, including phenol, methyl orange, and methylene blue, could be maintained at levels ranging from 80.00 % to 97.00%. Particularly, under optimized operating conditions, the specific energy consumption (EC) for the CNT/ MoS2/Fe3O4 2 /Fe 3 O 4 membrane process was measured at 0.60 +/- 0.01 +/- 0.01 kWh/m3, 3 , showcasing exceptionally low energy consumption characteristics. In conclusion, it is expected to contribute to the reduction of the overall consumption of heterogeneous electro-Fenton oxidation systems and enhance their operational efficiency. This innovative approach represents a significant advancement in the field, offering the potential to address the economic limitations associated with electro-Fenton technology in water quality purification.

Intensified Internal Electrolysis for Degradation of Methylene Blue As Model Compound Induced by a Novel Hybrid Material: Multi-walled Carbon Nanotubes Immobilized on Zero-Valent Iron Plates (Fe0-Cnts)

Photocatalytic Activity of Zero-Valent Iron Nanoparticles Highly Dispersed on Porous Carbon Materials

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Multi-walled carbon nanotubes immobilized on zero-valent iron plates (Fe0-CNTs) for catalytic ozonation of methylene blue as model compound in a bubbling reactor

Fabrication and Investigation on Ag Nanowires/tio2 Nanosheets/graphene Hybrid Nanocomposite and Its Water Treatment Performance

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Long-lasting Activity of Fe0-C Internal Microelectrolysis-Fenton System Assisted by Fe@C-montmorillonites Nanocomposites

Efficient Degradation of MB Dye by 1D FeWO4 Nanomaterials Through the Synergistic Effect of Piezo-Fenton Catalysis

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

Nanoscale Zero-Valent Iron Incorporated with Nanomagnetic Diatomite for Catalytic Degradation of Methylene Blue in Heterogeneous Fenton System.

Electrochemical Activity of Self-Supporting Nitrogen-Doped Graphene for the Degradation and In-Situ Determination of Methylene Blue

An electron transfer tuning strategy for the efficient degradation of tetracycline hydrochloride by Fe-N co-doped carbon materials activated with peroxymonosulfate

Iron Carbon Catalyst Initiated the Generation of Active Free Radicals without Oxidants for Decontamination of Methylene Blue from Waters

Laser-Induced Nitrogen-Doped Graphene Composite Iron–Cobalt Hydroxide for Methylene Blue Degradation via Electrocatalytic Activation of Peroxymonosulfate

Microwave-induced Carbon Nanotubes Catalytic Degradation of Organic Pollutants in Aqueous Solution

Carbon nanoplating stabilization of hierarchical MXene@C@MnO 2 catalyst for effective Fenton-like reaction

CNT encapsulated MnO<i><sub>x</sub></i> for an enhanced flow-through electro-Fenton process: the involvement of Mn(IV)

Core-shell structured Fe<SUP>0</SUP>/Mn<SUP>0</SUP>@Fe/Mn oxides bimetallic nanocomposites as novel heterogeneous electro-Fenton catalysts for methylene blue removal

In-situ Interconnected 1D/2D/3D Architectures of CNT/MoS2/Fe3O4 Membranes for Increasing Degradation Efficiency of Penetrative Electro-Fenton under Low Energy Consumption

Highly Efficient Iron Nanocatalyst Stabilized by Double-Walled Carbon Nanotubes and Mixed Metal Oxides for Degradation of Cationic and Anionic Dyes by A Fenton-Like Process

Facile Preparation of Functionalized Carbon Nanotubes with Tannins Through Mussel-Inspired Chemistry and Their Application in Removal of Methylene Blue