Abstract:Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

One-Pot Acylation/Benzimidazolization Copolymerization Approach to Side-Chain-Type Proton Conductive Membranes

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Proton-conducting membranes based on side-chain-type sulfonated poly(ether ketone/ether benzimidazole)s via one-pot condensation

Highly proton-conductive and low swelling polymeric membranes achieved by hydrophilic covalent cross-linking

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide

Considerations of the morphology in the design of proton exchange membranes: Cross-linked sulfonated poly(ether ether ketone)s using a new carboxyl-terminated benzimidazole as the cross-linker for PEMFCs

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Novel aromatic proton-exchange polyelectrolytes via polyacylation of pre-sulfonated monomers

In situ polymerization: A novel route for thermally stable proton-conductive membranes

Efficient proton exchange membranes based on bifunctional metal–organic frameworks

Cross-linked tri-side chains poly(arylene ether ketone)s containing pendant alkylsulfonic acid groups for proton exchange membranes

High Performance Ion Exchange Membranes Prepared Via Direct Polyacylation of Racemic and (s)‐1,1′‐binaphthyl‐based Cationic/Anionic Monomers

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton-conducting membranes based on benzimidazole-containing sulfonated poly(ether ether ketone) compared with their carboxyl acid form

New technology for the development of modified polybenzimadazole for advanced direct methanol fuel cell

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

Proton exchange membrane deriving from sulfonated N-heterocyclic poly(aryl ether ketone)s containing ether-free proton conducting units and performing enhanced physicochemical stability and conduction properties

Preparation and Properties of Poly(2,5-Benzimidazole)/Sulfonated Sepiolite Composite Proton Exchange Membrane