Abstract:Inertial orientation systems have many potential uses beyond air- and spacecraft applications. Compared to the conventional large-scale system, the novel aspects of an orientation system based on micro electromechanical systems (MEMS) are small size, lightweight, low-power consumption, and low cost by the inclusion of microsensors with on-chip functionality, such as micromachined rate gyroscopes, accelerometers, and etc. However, the performance associated with these low-cost MEMS sensors is generally not satisfied. A conventional strapdown method based on integral of angular rate to figure out attitudes will inevitably induce long-term drift. For eliminating this accumulative error and thus using the low-cost navigation system for a long-duration mission, a hybrid configuration by combining a MEMS-based azimuth-level detector with the conventional strapdown system is proposed in this paper. The azimuth-level detector is composed of three-axis MEMS accelerometers and three-axis MEMS magnetometers. With an absolute solution based on the gravity and the earth magnetic field rather than the integral algorithm, attitude and heading estimation without drift errors can be obtained so as to facilitate adjusting the attitude and heading for the conventional strapdown system. The hierarchical computation process for estimating the attitude and heading using the hybrid system is depicted first. Then, comprehensive system errors including transformation errors of the computation, such as skew, scale, and drift errors, are analyzed. Finally, it is verified by both of formula analysis and experimental test that the accumulative errors can be effectively eliminated via this hybrid scheme.

Initial alignment for low-cost attitude and heading reference systems

Rapid Initial Heading Alignment for MEMS Land Vehicular GNSS/INS Navigation System

In-motion Alignment for Low-cost SINS/GPS under Random Misalignment Angles

A GNSS Aided Initial Alignment Method for MEMS-IMU Based on Backtracking Algorithm and Backward Filtering

A Position Loci-Based In-Motion Initial Alignment Method for Low-Cost Attitude and Heading Reference System

GNSS-assisted optimal alignment method for low-cost SINS motion of vehicle

A High-Accuracy GPS-Aided Coarse Alignment Method for MEMS-Based SINS

Attitude Heading Reference System Using MEMS Inertial Sensors with Dual-Axis Rotation

Initial Alignment for SINS Based on Low-cost IMU.

Design of Attitude and Heading Reference System Based on MEMS Sensor

Initial Alignment Method of MEMS SINS Based on Accelerometer Redundant Configuration

Optimization-based alignment for inertial navigation systems: Theory and algorithm

A Small Low-Cost Hybrid Orientation System and Its Error Analysis

A Fast Initial Alignment Method Assisted by the Measurement Information of Gyro

A Unified Initial Alignment Method of SINS Based on FGO

Initial Alignment For Sins Based On Pseudo-Earth Frame In Polar Regions

A novel initial alignment algorithm of SINS/GPS on stationary base with attitude measurement

A Novel Approach for Attitude Estimation Based on MEMS Inertial Sensors Using Nonlinear Complementary Filters

A Rapid Initial Alignment Alogrithm Based on Strapdown Gyrocompass

An Algorithm for Improving the Convergence Rate of Attitude by Using GPS Heading Angle in MEMSINS/GPS Integrated Navigation

An Improved In-flight Alignment Method Based on Backtracking Navigation for GPS-aided Low Cost SINS With Short Endurance