Biomechanical analysis of different fixation methods in the treatment of posteromedial tibial plateau fracture

Hai-feng Yang,Jun-wu Huang,Chun-lin Zhang

DOI: https://doi.org/10.3969/j.issn.2095-4344.2013.26.011

2013-01-01

Abstract:10.3969/j.issn.2095-4344.2013.26.011

What problem does this paper attempt to address?

Finite Element Analysis of Three Internal Fixations for the Posteromedial Split Fracture Fragment in Tibial Plateau Fractures

Wupeng Zhang,Cheng Xu,Zhengfeng Jia,Daofeng Wang,Weilu Gao,Jiantao Li,Licheng Zhang,Peifu Tang

DOI: https://doi.org/10.1080/10255842.2024.2399036

2024-01-01

Abstract:Posteromedial tibial plateau fracture is one of the most challenging traumatic fractures. We aimed to compare and explain the biomechanical advantages and disadvantages of different internal fixation methods for the treatment of the posteromedial split fracture fragment in tibial plateau fractures. Finite element models of the tibial plateau fracture were constructed. Three different internal fixations were developed to treat the posteromedial split fracture fragment in tibial plateau fractures finite element models: (a) the novel anatomic locking plate fixation model, (b) the common anatomic locking plate fixation model, and (c) the reconstruction plate fixation model. We applied the same loading conditions to each model: 320 N axial compression. Under the same condition, the von Mises stress (VMS) and displacement distribution of the three internal fixations and tibia plateau were studied. The stress values of the novel anatomic locking plate are lower than the common anatomic locking plate and the reconstruction plate. Additionally, the novel anatomic locking plate fixation system exhibits smaller maximum displacement. In conclusion, our study indicated that the novel anatomic locking plate resulted in a lower stress distribution in the plate and screws, and better stability than the common anatomic locking plate and the reconstruction plate for the posteromedial split fracture fragment in tibial plateau fractures fixation under the same loading conditions. Thus, for the posteromedial split fracture fragment in tibial plateau fractures, the use of the novel anatomic locking plate internal fixation is recommended.
Improved anterolateral approach to treatment of terminal femoral fractures

Xiao Yi-zeng,Yang De-yu,Huang Dianfeng,Su Zai-quan,You Rui-jin,Zheng Wen-zhong

DOI: https://doi.org/10.3969/j.issn.1671-3826.2013.06.10

2013-01-01

Abstract:Objective To explore the clinical effects of internal fixation with plate by the improved anterolateral approach to treatment of terminal femoral fractures.Methods Internal fixation with plate by improved anterolateral approach was applied to 78 patients with complex comminuted bone fractures of terminal femora from August 2008 to January 2012.Results During the follow-up of 10 months to 2 years,73 patients reached complete healing without screw relaxation,plate rupture and malformation(e.g.limb shortening and knee varus or eversion);the other 5 ones who suffered from nonunion reached complete healing by the second stage bone grafting.The excellent and good rate of knee joint function was up to 91 %.Conclusion With simple procedure,reliable fixation,integral protection of knee extensor device,mini-operative damage and propitiousness to functional recovery of knee joint,the internal fixation with plate by the improved anterolateral approach is a relatively good therapeutic approach to the complex comminuted bone fractures of terminal femora.
Extended Anterolateral Approach for Thetreatment of Tibial Plateau Fractures with Posterolateral Bone Fragment

Jiang Liangjun,Zheng Qiang,Feng Gang,Wang Jianwei,Pan Zhijun

DOI: https://doi.org/10.3760/cma.j.issn.0253-2352.2018.19.002

2018-01-01

Abstract:Objective To investigate the differences and clinical effects of extended anterolateral approach in the treatment of simple/complex tibial plateau fractures with posterolateral bone fragment.Methods From January 2013 to December 2015,forty-six patients with posterolateral tibial plateau fractures treated in our hospital were included in our research.The posterolateral plateau fractures were reduced and fixed by the extended anterolateral approach.According to Schatzker fracture classification,patients with type Ⅱ fractures were treated as simple group and patients with type Ⅴ and type Ⅵ fractures were treated as complex group.According to tibial plateau three column classification,patients were divided into single column group,double column group and three column group.The operative time,bleeding volume,fracture healing time,postoperative Rasmussen score,knee mobility,reduction and fixation of fractures and postoperative complications were compared among the groups.Results All 46 patients were followed up for 23-45 months,with an average of 31.9 months.There were 24 cases in simple fracture group and 22 cases in complex fracture group.The mean operation time of simple group was 124±33.8 min,and that of complex group was 175±65.5 min,with significant difference (t=2.302,P=0.025);the mean bleeding volume of simple group was 118±93.5 ml,and that of complex group was 190± 149.4 ml,with significant difference (t=1.905,P=0.028).12 cases were treated with arthroscopy.Bone union was achieved in all patients at the last follow-up,and daily activities were not limited.The average healing time was 4.58 months in simple group and 5.54 months in complex group.The excellent rate of fracture reduction was 83.3％ in simple group and 27.3％ in complex group (x2=14.679,P=0.000).Posterolateral bone fragment was not completely fixed in 4 cases (16.7％) in simple group and 8 cases (36.4％) in complex group.The average Rasmussen function score was 26.8±2.1 and the range of motion of knee joint was 100°-120° (average 115.5°±6.2°) in simple group;The average Rasmussen function score was 23.5±3.4 points and the range of motion of knee joint was 95°-115° (average 106.3°±7.4°) in complex group,neither with no significant differences.According to the three-column fracture classification system,there were 6 cases in the single-column group,24 cases in the double-column group and 16 cases in the three-column group.There were significant differences in the operative time (F=5.039,P=0.000),bleeding volume (F=5.215,P=0.000) and the excellent rate of fracture reduction (x2=7.003,P=0.030) between these three groups.But there was no significant difference in the time of fracture healing,un-fixation rate of posterolateral bone fragment,knee joint Rasmussen score and knee jointactivity.The excellent rate of fracture reduction was 83.3％ in arthroscopy assisted cases and 47.1％ in arthroscopy un-assisted cases respectively (x2=4.749,P=0.002).Postoperative wound infection occurred in 1 patient.Conclusion Extended anterolateral approach could provide good reduction and fixation of tibial plateau fractures with posterolateral bone fragment with satisfactory clinical outcomes obtained in both simple and complex fractures.The operation was relatively simple and posterolateral bone fracture could get better reduction and fixation in simple tibial plateau fractures,and arthroscopy treatment was helpful to improve fracture reduction.
Biomechanical comparison of two screw fixations in treatment of tibial plateau fractures ZHANG

Ya-jun ZHANG,Pei-xun ZHANG,Jian-hai CHEN,Bao-guo JIANG

DOI: https://doi.org/10.3760/cma.j.issn.1671-7600.2008.08.012

2008-01-01

Abstract:Objective To compare the biomechanical stabilities of 2 fixations for oblique split fractures of tibial plateau. Methods Oblique split fractures of the medial tibial plateau were simulated by osteotomy in 6 pairs of fresh tibia of adult swine. One fracture of each pair was fixed with 3 lag screws parallel to the articular surface whereas the contralateral site was stabilized with 3 lag screws vertical to the fracture line. The maximum anti. Compression load, the maximum power consumption at the maximum load.the load and power consumption at the 2 mm subsidence of articular surface were measured and recorded. Results There were no significant differences between the 2 groups in the maximum anti-compression load. The maximum power consumption at the maximum load, the load and power consumption at the 2 mm subsidence of articular surface. Conclusion Vertical fixation may not provide a biomechanical advanrage over the parallel fixation in stabilizing oblique split fractures of tibia plateau.
Biomechanics and finite element analysis comparing posterior T-plates with LCP for fixation of posterolateral tibial plate fractures

Zhenghui Hu,Weizhi Ren,Jian Peng,Zenghui Gu,Chenying Wu,Weicheng Wu,Wen Zhang,Wei Xu,Liubing Li

DOI: https://doi.org/10.3389/fbioe.2023.1286993

IF: 5.7

2023-12-07

Frontiers in Bioengineering and Biotechnology

Abstract:Objective: The treatment for posterolateral tibial plateau fractures (PTPF) have been subjects of controversy. We conducted a study to improve the fixation of PTPF through a lateral approach. Methods: We utilized 40 synthetic tibias and categorized the fracture models into five groups based on the locking compression plate (LCP) and T-distal radius plate (TPP) via various forms of fixation with screws through the posterolateral (PL) fracture fragments. I: Two-screw fixation using two locking screws (LPTL). II: Two-screw fixation with both variable angle locking screws (LPTV). III: One-screw fixation with one locking screw (LPOL). IV: One-screw fixation with one locking screw and two anteroposterior lag screws (LPOLTL). V: a distal radius plate with three locking screws (TPP). Biomechanical tests were conducted to observe the axial compression displacement of the PL fracture fragments at force levels of 250 N, 500 N, and 750 N, as well as to determine the failure load and the axial stiffness for each respective group. Results: Under a 750 N load condition, the displacements within the five experimental groups exhibited the following trend: V < II < I< IV < III. However, there were no significant differences between Group V and Group II, Group I and Group IV ( p > 0.05), and only Group III demonstrated a displacement exceeding 3 mm. The failure load and the axial stiffness exhibited the same trend. Conversely, statistical significance was identified among the remaining group compared with Group III ( p < 0.05). Regarding the finite element analysis, the maximum displacements for the five models under the load of 750 N exhibited the following trend: V < II < I< IV < III. The following trends were observed in maximum von Mises stresses for these models under the load of 750 N: V < II < IV< I < III. Conclusion: It is crucial to address the inadequate mechanical strength associated with single screw fixation of LCP for fixing PL fractures in a clinical setting. The biomechanical strength of two-screw fixation surpasses that of single-screw fixation. Introducing variable-angle screws can further enhance the fixation range. Furthermore, the addition of two lag screws threaded from anterior to posterior can compensate the mechanical stability, when PL fracture is fixed with single screw in clinic.

multidisciplinary sciences
Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Kai-Cheng Lin,Yih-Wen Tarng,Kun-Jhih Lin,Hung-Wen Wei

DOI: https://doi.org/10.1007/s40846-022-00690-y

IF: 2

2022-02-17

Journal of Medical and Biological Engineering

Abstract:PurposeDealing with high-energy fractures of the tibial plateau remains a challenge despite advances in implants, surgical approaches, and imaging methods. It is difficult to achieve sufficient fixation stability of a posterior T-shaped buttress (PTB) plate, the most commonly used implant. A tibial locking plate, called the proximal posterior medial tibial (PPMT) plate, that aims to improve fixation strength for tibial plateau split fractures was recently introduced. This study evaluates the biomechanical strength of this plate and compares it to that of a proximal medial tibial (PMT) plate and a PTB plate.MethodsTibial plateau fractures were simulated using a human tibia model. Either a PMT, PPMT, or PTB plate was virtually implanted into each fracture model. The posteromedial fragment vertical subsidence was measured under a 2000-N joint contact force. The maximum equivalent stress on the bone plate and bone screw and the construct stiffness were determined.ResultsThe PMT plate allowed the least posteromedial fragment subsidence and produced the highest construct stiffness. The PPMT plate showed higher stiffness than that of the PTB plate. The maximum equivalent stress was the smallest for the PMT plate.ConclusionThis study showed that PMT and PPMT plates are the most biomechanically stable fixation constructs for posteromedial split tibial plateau fractures.

engineering, biomedical
Finite element analysis of a novel anatomical plate in posterolateral plateau fractures

Zhen Jian,Xinhua Jiang,Dejian Li,Jianhua Zhou,Baoqing Yu,Chengqing Yi

DOI: https://doi.org/10.3389/fsurg.2024.1346462

2024-07-15

Abstract:Objective: This study aims to analyze the biomechanical characteristics of posterolateral plateau fractures fixed by a novel anatomical plate using finite element analysis. Methods: A three-dimensional digital model of the full length of right tibiofibula was obtained by CT scanning. A posterolateral tibial plateau fracture model was then created. The acquired fracture model was assembled with 4 groups of internal fixations: Group A, novel anatomical plate; Group B, straight buttress plate; Group C, oblique T-shaped locking plate; Group D, two lag screws. Axial loads of 500, 1,000 and 1,500 N perpendicular to the horizontal plane were used to simulate the stress on the lateral plateau of a 65 kg person standing, walking and fast running. Results: Vertical displacements of the posterolateral fragments in each of the four groups gradually increased under loads from 500 N to 1,500 N. The maximum displacement of the fracture fragment in four groups were all located on the lateral side of the proximal part, and the displacement gradually decreased from the proximal part to the distal end. The maximum displacement values under the axial load of 1,500 N was in the following order: novel anatomical plate (1.2365 mm) < oblique T-shaped locking plate (1.314 mm) < two lag screws (1.3747 mm) < straight buttress plate (1.3932 mm). As the axial load increased, the stress value of the different internal fixation models gradually increased. The stress behavior of the same internal fixation model under different loads was similar. The maximum stress value under the axial load of 1,500 N was in the following order: novel anatomical plate (114.63 MPa) < oblique T-shaped locking plate (277.17 MPa) < two lag screws (236.75 MPa) < straight buttress plate (136.2 MPa). Conclusion: The patients with posterolateral plateau fractures fixed with a novel anatomical plate in standing, walking and fast running can achieve satisfactory biomechanical results, which lays the foundation for future applications. At the same time, clinical fracture types are often diverse and accompanied by damage to the soft tissue. Therefore, the ideal surgical approach and appropriate internal fixation must be selected based on the patient's injury condition.
Comparison of Extended Anterolateral Approach in Treatment of Simple/complex Tibial Plateau Fracture with Posterolateral Tibial Plateau Fracture

Liangjun Jiang,Qiang Zheng,Zhijun Pan

DOI: https://doi.org/10.1186/s13018-018-1007-7

IF: 2.6

2018-01-01

Journal of Orthopaedic Surgery and Research

Abstract:Our hospital has recently used the extended anterolateral approach in posterolateral tibial plateau fracture. We compared the clinical effects of this method in Schatzker type II or type V/VI fractures with posterolateral tibial plateau fracture based on our patients.
The Study of Biomechanics and Clinical Anatomy on a Novel Plate Designed for Posterolateral Tibial Plateau Fractures via Anterolateral Approach

Weizhi Ren,Wen Zhang,Shijie Jiang,Jian Peng,Chang She,Liubing Li,Yongtao Mao,Haibin Zhou,Wei Xu

DOI: https://doi.org/10.3389/fbioe.2022.818610

IF: 5.7

2022-03-08

Frontiers in Bioengineering and Biotechnology

Abstract:There is no consensus about the optimal internal fixation selection for treatment of posterolateral tibial plateau fracture. This study described a novel plate through an anterolateral approach for posterolateral tibial plateau fractures (PTPFs). We evaluated the biomechanical performance of a novel plate and two conventional internal implants and investigated the anatomic feasibility of the novel plate. The fracture models were randomly assigned into six groups: Groups A–C were the model groups of posterolateral split fracture, fixed with the posterior buttress plate, the lateral locking plate, and the novel plate, respectively. Groups D–E were the model groups of posterolateral depression fracture, fixed with the posterior buttress plate, the lateral locking plate, and the novel plate, respectively. We evaluated the biomechanical performance of six model groups by the biomechanical testing and finite element analysis. Progressively increasing axial compressive loads were applied to each synthetic fracture model by using a customized indentor under 250–750 N loads. Meanwhile, we dissected 12 fresh frozen knee specimens and fixed them with the novel plate through the anterolateral approach. We recorded the adjacency of the novel plate to important anatomic structures. Biomechanical testing showed that the novel plate had the least displacement, followed by the posterior buttress plate, and the lateral plate had the most displacement in posterolateral split fracture. There was no significant difference in the displacement between the novel plate and the lateral plate at different loads in posterolateral depression fractures. And the posterior buttress plate showed the most displacement. In the finite element analysis, the maximum stress values of Groups A, B, and C were 383.76, 414.63, and 305.07 MPa under the load of 750 N, respectively. The maximum stress values of Groups D, E, and F were 474.28, 436.31, and 413.4 MPa under the load of 750 N, respectively. In the anatomic study, the placement of the novel plate had a low risk of damage to the important anatomic structures of knee posterolateral corner. The novel plate could be a great choice for the treatment of PTPFs due to better biomechanical performance and easy manipulation.

multidisciplinary sciences
Comprehensive biomechanical analysis of three clinically used fixation constructs for posterior malleolar fractures using cadaveric and finite element analysis

Adeel Anwar,Zhenwei Hu,Atif Adnan,Yanming Gao,Bing Li,Muhammad Umar Nazir,Cong Tian,Yanfeng Wang,Decheng Lv,Zhi Zhao,Zhen Zhang,Hu Zhang,Changgui Tong,Gang Lv

DOI: https://doi.org/10.1038/s41598-020-75819-7

IF: 4.6

2020-10-29

Scientific Reports

Abstract:Abstract Different fixation modalities are available for fixation of posterior malleolar fractures (PMFs), but the best method is still unclear. The purpose of this study was to carry out a comparative biomechanical analysis of three commonly used fixation constructs for PMFs using experimental and finite element analysis (FEA). 15 human cadaveric ankle specimens were randomly divided into three groups. Specimens in group-A were fixed with two anteroposterior (AP) lag screws, group-B with two posteroanterior (PA) lag screws, and for group-C, a posterior plate was used. Each model was subjected to axial load. Outcomes included loads for 0.5 mm, 1 mm, 1.5 mm, and 2 mm vertical displacements of posterior fragments were noted. 3D FE models were reconstructed from computed tomography (CT) images and subjected to vertical loads. The model’s stress, fracture step-off, and resultant strains in implants were also studied in 3D FE models. Significantly higher amounts of mean compressive loads were observed to cause the same amount of vertical displacements in plate group (265 ± 60.21 N, 796 ± 57.27 N, 901.18 ± 8.88 N, 977.26 ± 13.04 N) than AP (102.7 ± 16.78 N, 169.5 ± 19.91 N, 225.32 ± 15.92 N, 269.32 ± 17.29 N) and PA (199.88 ± 31.43 N, 362.80 ± 28.46 N, 431.3 ± 28.12 N, 541.86 ± 36.05 N) lag screws respectively (P < 0.05). Simulated micro-motion analysis demonstrated that fracture step-off values in plate group (0.03 ± 0.001 mm, 0.06 ± 0.003 mm and 0.13 ± 0.010 mm) were the lowest among the three groups (P < 0.001). The cancellous bone showed the highest amount of stress in AP and PA lag groups respectively, whereas the lowest stress was noted in the plate-group. This biomechanical study concluded that posterior plating is biomechanically the most stable fixation construct for PMFs fixation. AP and PA lag screws with higher bone stress and fracture step-off values have a high tendency of bone cut-through and loss of fixation respectively.

multidisciplinary sciences
Dual locking plate fixation for Type C3 tibial plateau fractures involving the posterior column

冯刚,潘志军,李杭,郑强,李建兵,王建卫,谭延斌,王剑,高翔

DOI: https://doi.org/10.3760/cma.j.issn.0253-2352.2014.07.001

2014-01-01

Abstract:Objective To investigate and evaluate the effects of treating type C3 tibial plateau fractures involving the posterior column by dual locking plate fixation via modified anterolateral and anteromedial approach.Methods We retrospectively studied 15 patients with type C3 tibial plateau fractures involving the posterior column that were treated in our hospital from March 2011 to December 2012.The group included 9 males and 6 females,aged from 27 to 56 years old (average 42.6 years old).All of the cases were closed fracture.During the treatment and follow-up period,the curative effect was evaluated by using Rasmussen's radiological grading for radiological outcomes at each follow-up and HSS grading for clinical examination about the knee joint function at the 12th follow-up.Results All patients obtained follow-up and the average follow-up time was 13.5 months (range,12-23 months).The average time for the whole operation,full weight bearing and fracture union were 196 min (range,120-210 min),11.6 weeks (range,8-20 weeks) and 13.8 weeks (range,12-16 weeks) respectively.No statistical difference was found in either the tibial plateau angle (TPA) or posterior slope angle (PA) when comparing the measuring results at instant,3rd month,6th month and 12th month on radiographies.All the results according to HSS grading are excellent and the mean score of the HSS grading was 89.5 (from 85 to 95); the mean score of the Rasmussen's radiological grading was 16.2 (range,14-18).Skin necrosis (about 4 cm) occurred at medial incision in one case at 2 week postoperatively.The patient was healed by debridement and negative pressure drainage.No complication,including infection,nonunion,reduction lost,fixation loosening,keen joint instability,iatrogenic injuries,occurred.Conclusion Treatment for type C3 tibial plateau fractures involving the posterior column by dual locking plate fixation via modified anterolateral and anteromedial approach is a feasible and effective method.Sufficient exposure,good reduction and fixation,earlier functional exercise can be achieved without several complications such as vascular and nerve injury and infection.The knee function recovered well and earlier curative effect was satisfied without noticeable TPA,PA loss and articular surface collapse during follow-up.
A Comparison of the Clinical Effect of Two Fixation Methods on Hoffa Fractures

Yi Xu,Heng Li,Hong-hang Yang,Zhi-jun Pan

DOI: https://doi.org/10.1186/s40064-016-2861-6

2016-01-01

SpringerPlus

Abstract:Hoffa fractures are rare and difficult to treat for orthopaedic surgeons. The mechanism of injury of Hoffa fracture is still unknown and the operation approch and fixation method are still controversial. The aim of this study is to compare the clinical effect between two fixation methods on Hoffa fractures.
Biomechanical evaluation of different fixation methods for fracture dislocation involving the proximal tibia

Rui Jiang,Cong-Feng Luo,Bing-Fang Zeng

DOI: https://doi.org/10.1016/j.clinbiomech.2008.04.005

Abstract:Background: Fracture dislocations of the knee involving the proximal tibia are difficult to treat because of the operative approach that maybe required and the instability of the construct. The optimal fixation method of these fractures remains controversial, improper fixations usually lead to an unsatisfactory prognosis. The purpose of this study was to compare the mechanical strength of four different fixation constructs for this kind of fracture. Methods: Twenty-eight Synbone simulated fracture models were created, reduced, and instrumented with one of four constructs: medial single plate, medial double plates, bilateral double plates, or lateral locked plate. Biomechanical testing was done to determine the postfixation construct stiffness, the maximum load to failure, and the medial condylar displacement for each of the four constructs. Findings: The medial double plates construct was shown to provide the highest overall construct stiffness and the least medial condylar displacement than each of the other three constructs (both P=0.000); The lateral locked plate construct was shown to provide the lowest overall construct stiffness and the largest medial condylar displacement than each of the other three constructs (both P=0.000); There was no significant difference measured between the medial single plate construct and the bilateral double plates construct for overall construct stiffness and medial condylar displacement. Interpretation: This study suggests that the medial double plates technique is biomechanically the best fixation method for fracture dislocations involving the proximal tibia, while lateral locked plate technique is not indicated to this kind of fracture due to its insufficient stability.
An imageology-based feasibility study of plating posterolateral tibial plateau fractures via an anterolateral trans-fibular-head approach

Xiaoji Zhou,Jiangshan Zhou,Huajun Qian,Chunxiao Qian,Bin Xu,Lv Pan,Xudong Chu,Lv Pan and Xudong Chu

DOI: https://doi.org/10.1186/s12891-024-07311-6

IF: 2.562

2024-03-06

BMC Musculoskeletal Disorders

Abstract:There are many difficulties in the reduction and fixation of the tibial plateau fractures involving posterolateral quadrant using general plates via traditional approaches. By imaging the area above the fibulae capitulum, this study was performed to investigate the feasibility of the trans-fibular-head approach and to design an ideal anatomical plate.

orthopedics,rheumatology
Computational analysis of the biomechanical stability of internal fixation of the lateral tibial plateau fracture: A mechanical stability study

Yafeng Li,Fengyuan Lu,Peng Yi,Zichun Zou,Xi Zhang,Jing Zhang

DOI: https://doi.org/10.1177/09544119241272782

2024-08-24

Abstract:The selection of internal fixation as the primary fixation modality for the patient is one of the challenges for the surgeon treating the patient in question. A model of the lateral tibial plateau fracture was established. Three different configurations of internal fixators namely L bone plate, T bone plate, and screw-washer were analyzed. Three stages after surgery were simulated to assess the displacement of bone plates, screws, washers, and the stress shielding ratio in the fracture area.At three stages after surgery, the T bone plate showed better stability for patients during rehabilitation compared with the remaining two schemes, and the screw-washer scheme was the least stable due to the larger internal fixation displacement and stress shielding ratio in the fracture area. In contrast, the L bone plate scheme showed better stability in the early stages after surgery but was second only to the screw-washer scheme in the middle and late stages after surgery. The T bone plate showed better stability and became a new selection for surgeons to treat related patients. At three stages after surgery, the T bone plate has better biomechanical stability compared to the L bone plate and screw-washer schemes.
A Locking Plate Designed With Cluster of Head Screws Would Be Biomechanically Superior Than Conventional Buttress Plate For The Fixation of Posteromedial Tibial Plateau Fractures: A Computational Assessment

Kai-Cheng Lin,Yih-Wen Tarng,Kun-Jhih Lin,Hung-Wen Wei

DOI: https://doi.org/10.21203/rs.3.rs-984353/v1

2021-11-12

Abstract:Abstract Background: Dealing with high-energy fractures of the tibial plateau remains a challenge despite advances in implants, surgical approaches, and imaging methods. Posterior buttress plate is most commonly used implant but the fixation stability is still a challenge. Recently, a newly designed tibial locking plate was introduced that aims to provide better fixation strength for tibial plateau split fracture. This study compared the biomechanical strength of three different posteromedial tibial plateau split fracture fixation methods. Methods: The tibial plateau fractures were simulated using a human tibiae model. Each fracture model was virtually implanted with one of the three following constructs, proximal medial tibial plate (PMT), proximal posterior medial tibial plate (PPMT), and posterior T-shaped buttress plate (TBP). Posteromedial fragment vertical subsidence was measured under 2000 N joint contact force. The maximum Equivalent stress on the bone plate and bone screw and the construct stiffness were determined. Results: The proximal medial tibial plate (PMT) allowed the least posteromedial fragment subsidence and produced higher construct stiffness than each of the other two constructs. However, the proximal posterior medial tibial plate (PPMT) showed higher stiffness than the T-shaped buttress plate (TBP). The maximum Equivalent stress was the smallest for the proximal medial tibial plate (PMT). Conclusion: This study showed that the proximal medial tibial locking plate or proximal posterior medial tibial locking plate were biomechanically more stable fixation methods for posteromedial split tibial plateau fractures.
[Clinical Study on Treatment of Posterolateral Fracture of Tibial Plateau Via Superior Fibular Head Approach].

Xudong Chu,Xiaohui Liu,Weinan Chen,Jianming Gao,Yuchun Luo,Jianping Zhu,Fujin Cai,Min Zhou

DOI: https://doi.org/10.7507/1002-1892.20130035

2013-01-01

Abstract:OBJECTIVE:To observe the effectiveness of the superior fibular head approach for the treatment of posterolateral fracture of the tibial plateau.METHODS:Between June 2010 and February 2012, 20 cases of posterolateral fracture of the tibial plateau were treated through superior fibular head approach, including 1 case of simple posterolateral fracture of the tibial plateau and 19 cases of posterolateral fracture of the tibial plateau with other fractures. There were 12 males and 8 females with an average age of 42.2 years (range, 28-58 years). All patients had closed fractures. Fracture was caused by traffic accident in 14 cases, by falling from height in 4 cases, and by twist injury in 2 cases. Associated injuries included lateral meniscus injury in 5 cases, medial meniscus injury in 2 cases, and anterior cruciate ligament injury in 1 case. The time from injury to admission ranged from 90 minutes to 32 hours (mean, 4.5 hours), and the time from admission to operation was 5-12 days (mean, 7.8 days). All cases underwent fracture reduction and fixation with Pilon plates through the superior fibular head approach, and associated fracture and meniscal injury were treated.RESULTS:All incisions healed by first intention, and no numbness or articular instability occurred. All patients were followed up 6-26 months (mean, 19.1 months). The average fracture healing time was 10.2 weeks (range, 8-12 weeks). During following-up, no related complication of fixation loosening or articular surface loss occurred. According to Rasmussen knee score criteria at last follow-up, the score was 18-30 (mean, 27.9); 16 cases were graded as excellent, 3 cases as good, and 1 case as fair, with an excellent and good rate of 95%.CONCLUSION:The superior fibular head approach for the treatment of posterolateral fracture of the tibial plateau is simple, safe, and effective, and can achieve a good surgical outcome.
Effectiveness of bone grafting versus cannulated screw fixation in the treatment of posterolateral tibial plateau compression fractures with concomitant ACL injury: a comparative study

Yang Yang,Xiaofang Lin,Jianmin Zhang,Hanlong Xin,Dawei Han,Qingguo Zhang,Xiaobo Zhou

DOI: https://doi.org/10.1186/s13018-023-04516-8

IF: 2.6

2024-01-20

Journal of Orthopaedic Surgery and Research

Abstract:Posterolateral tibial plateau compression fractures (PTPCF) are one of the significant factors leading to knee instability and anterior cruciate ligament (ACL) reconstruction failure. The effectiveness of fixation for such cases without the use of metal implants remains inconclusive. The aim of this study is to investigate whether the fixation with isolated bone grafting is stable enough for the treatment of PTPCF with concomitant ACL injuries.

orthopedics
A New Anatomic Locking Plate for the Treatment of Posterolateral Tibial Plateau Fractures

Zhen Jian,Rongguang Ao,Jianhua Zhou,Xinhua Jiang,Dianying Zhang,Baoqing Yu

DOI: https://doi.org/10.1186/s12891-018-2216-2

IF: 2.562

2018-01-01

BMC Musculoskeletal Disorders

Abstract:Posterolateral tibial plateau fractures have become more common, and their treatment is of great importance to knee function. Additionally, there is no available literature detailing specialized anatomic locking plate for tibial plateau fractures. Therefore, the aim of the study was to evaluate the safety and clinical efficacy of an innovative anatomic locking plate for treatment of posterolateral tibial plateau fractures.
Recovery and systems transformation for schizophrenia.

Scott A Peebles,P. A. Mabe,L. Davidson,L. Fricks,Peter F. Buckley,G. Fenley

DOI: https://doi.org/10.1016/J.PSC.2007.04.009

IF: 3.411

2007-09-01

Psychiatric Clinics of North America

Abstract:

Biomechanical analysis of different fixation methods in the treatment of posteromedial tibial plateau fracture

Finite Element Analysis of Three Internal Fixations for the Posteromedial Split Fracture Fragment in Tibial Plateau Fractures

Improved anterolateral approach to treatment of terminal femoral fractures

Extended Anterolateral Approach for Thetreatment of Tibial Plateau Fractures with Posterolateral Bone Fragment

Biomechanical comparison of two screw fixations in treatment of tibial plateau fractures ZHANG

Biomechanics and finite element analysis comparing posterior T-plates with LCP for fixation of posterolateral tibial plate fractures

Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Finite element analysis of a novel anatomical plate in posterolateral plateau fractures

Comparison of Extended Anterolateral Approach in Treatment of Simple/complex Tibial Plateau Fracture with Posterolateral Tibial Plateau Fracture

The Study of Biomechanics and Clinical Anatomy on a Novel Plate Designed for Posterolateral Tibial Plateau Fractures via Anterolateral Approach

Comprehensive biomechanical analysis of three clinically used fixation constructs for posterior malleolar fractures using cadaveric and finite element analysis

Dual locking plate fixation for Type C3 tibial plateau fractures involving the posterior column

A Comparison of the Clinical Effect of Two Fixation Methods on Hoffa Fractures

Biomechanical evaluation of different fixation methods for fracture dislocation involving the proximal tibia

An imageology-based feasibility study of plating posterolateral tibial plateau fractures via an anterolateral trans-fibular-head approach

Computational analysis of the biomechanical stability of internal fixation of the lateral tibial plateau fracture: A mechanical stability study

A Locking Plate Designed With Cluster of Head Screws Would Be Biomechanically Superior Than Conventional Buttress Plate For The Fixation of Posteromedial Tibial Plateau Fractures: A Computational Assessment

[Clinical Study on Treatment of Posterolateral Fracture of Tibial Plateau Via Superior Fibular Head Approach].

Effectiveness of bone grafting versus cannulated screw fixation in the treatment of posterolateral tibial plateau compression fractures with concomitant ACL injury: a comparative study

A New Anatomic Locking Plate for the Treatment of Posterolateral Tibial Plateau Fractures

Recovery and systems transformation for schizophrenia.