Abstract:Graphene based polymer composites have attracted considerable attention for both fundamental studies and practical applications. Fabricating polymer/reduced graphene oxide (rGO) composites via a readily mass-producible and environment-friendly technique is imperative for industry production. In this work, we tried to add various kinds of chemical reductants as "modifier" and study the possibility of in situ chemical reduction of graphene oxide (GO) during traditional thermoplastic processing of polymer and GO mixture. The thermal analysis and structural characterization revealed that among the 4 kinds reductants we investigated, hydroquinone (HQ) can effectively reduce GO during the commonly used melt blending or twin-roller miller mixing processing. For an ethylene vinyl acetate copolymer (EVA) composite prepared by melt-blending of EVA and GO (95:5 in mass) at 100 degrees C, the heat of reduction corresponds to the remove of oxygen-containing groups on GO in the composite is 50.6 J/g. In contrast, the value for the composite with 5 wt% HQ is only 1.6 J/g. The significant decreased values of reduction heat suggested the effective reduction of GO due to the addition of HQ. Although the reducing ability of HQ is weak relatively, our work confirms that it is possible to chemically reduce GO during traditional processing of polymer materials, which is helpful to develop a large-scale producible, cost-effective and environment-friendly approach for the fabrication of polymer/rGO composites. (C) 2016 Elsevier Ltd. All rights reserved.

A new insight into the in situ thermal reduction of graphene oxide dispersed in a polymer matrix

Effect of Covalent Functionalization on Thermal Transport Across Graphene-Polymer Interfaces

A Simplified Chemical Reduction Method for Preparation of Graphene: Dispersity, Reducibility and Mechanism

Flow-Induced Enhancement of in Situ Thermal Reduction of Graphene Oxide During the Melt-Processing of Polymer Nanocomposites

Effects of treatment temperature on the reduction of GO under alkaline solution during the preparation of graphene/geopolymer composites

Atomic Insights into the Relationship between Molecular Structure and Dispersion Performance of Phenyl Polymer on Graphene Oxide

In Situ Iodoalkane-Reduction of Graphene Oxide in a Polymer Matrix: an Easy and Effective Approach for the Fabrication of Conductive Composites

The probable influence of in situ thermal reduction of graphene oxides on the crystallization behavior of isotactic polypropylene

Communication—Enhanced Dielectric Constant of Polymer Composites Via Regulating Thermal Reduction Treatment Time of Graphene Oxide

Highly Ef Fi Cient Reduction of Graphene Oxide by Sub / Supercritical Water and Their Application for Thermal Interface Materials

Structural and optoelectronic properties of P3HT-graphene composites prepared by in situ oxidative polymerization

An Attempt Towards Fabricating Reduced Graphene Oxide Composites with Traditional Polymer Processing Techniques by Adding Chemical Reduction Agents

Effect of Covalent Functionalisation on Thermal Transport Across Graphene-Polymer Interfaces

In Situ Thermal Reduction of Graphene Oxide in a Styrene-Ethylene/butylene-styrene Triblock Copolymer Via Melt Blending

Effect of reduction methods and functionalization on the dispersion of graphene in epoxy

In situ fabrication and characterization of graphene/geopolymer composites

Solvothermally Reduced Graphene Oxide/polyimide Composites: Structures and Thermal and Mechanical Properties

Solvent-Assisted Thermal Reduction of Graphite Oxide

Effect of non-covalent functionalisation on thermal and mechanical properties of graphene-polymer nanocomposites

Probing the Thermal Deoxygenation of Graphene Oxide using High Resolution In Situ X-Ray based Spectroscopies

Thermodynamic and Kinetic Analysis of Lowtemperature Thermal Reduction of Graphene Oxide