Abstract:The pipe curtain structure method (PSM) is a novel construction method to control ground deformation strictly. Compared with the traditional pipe-roofing and pipe jacking method, the connection between pipes in large spacings using PSM is widely acknowledged as a unique construction procedure. Further study on this connection procedure is needed to resolve similar cases in that the pipes are inevitably constructed on both sides of existing piles. Cutting the steel plate during the connection procedure is the first step, which is crucial to control the safety and stability of the surrounding environment and existing structures. The deformation mechanism and limit support pressure of the cutting steel plate during the connection between pipes in large spacings are studied in this paper, relying on the undercrossing Yifeng gate tower project of Jianning West Road River Crossing Channel in Nanjing, China. A modified 3D wedge-prism failure model is proposed using the 3D discrete element method. Combined with Terzaghi loose earth pressure theory and the limit equilibrium theory, the analytical solutions for the limit support pressure of the excavation face of the cutting steel plate are derived. The modified 3D wedge-prism failure model and corresponding analytical solutions are categorised into two cases: (a) unilateral cutting scheme, and (b) bilateral cutting scheme. The analytical solutions for the two cases are verified from the numerical simulation and in-situ data and compared with the previous solutions. The comparative analysis between the unilateral and bilateral cutting schemes indicates that the bilateral cutting scheme can be adopted as a priority. The bilateral cutting scheme saves more time and induces less ground deformation than the unilateral one due to the resistance generated from the superimposed wedge. In addition, the parametric sensitivity analysis is carried out using an orthogonal experimental design. The main influencing factors arranged from high to low are the pipe spacing, the cutting size, and the pipe burial depth. The ground deformation increases with the increased cutting size and pipe spacing. The pipe burial depth slightly affects the ground deformation if the other two factors are minor. Cutting steel plates in small sizes, excavating soil under low disturbance, and supporting pipes for high frequency can effectively reduce the ground surface subsidence.

Study on cutter configuration for directly shield cutting of large-diameter piles

Direct shield cutting of large-diameter reinforced concrete group piles: Case study on Shenyang Metro construction

Statistical research on performance of prestressed concrete pipe piles

Dynamic damage and fracture mechanism of curved ripper cutting reinforced concrete composites: Numerical simulation combined with engineering practice

Cutting depth of pile materials subjected to the abrasive waterjet and its prediction model

Study on depth weakening of reinforced concrete piles cutting by abrasive waterjets under submerged conditions

Influence of abrasive waterjet pre-cutting slit on the performance of shield cutter cutting reinforced concrete

DEM-continuum mechanics coupling simulation of cutting reinforced concrete pile by shield machine

Investigation on the Influence of Active Underpinning Process on Bridge Substructures During Shield Tunnelling: Numerical Simulation and Field Monitoring

Damages and wear of tungsten carbide-tipped rippers of tunneling machines used to cutting large diameter reinforced concrete piles

Effects on upper masonry structures caused by double-line parallel shield cutting group pile construction

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Deformation mechanism and limit support pressure of cutting steel plate during connection between pipes in large spacing using pipe curtain structure method

Evaluation on cutting performance of novel PDC cutter for pipe jacking machine

Analysis of the impact of large-diameter shield construction adjacent to the side of the pile foundation

Research on the Deformation of Single Pile Induced by Adjacent Shield Driving

Field Study of Monotonic and Cyclic Lateral Behaviour of Piles in Soft Soils Improved with and Without Vacuum Preloading

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Novel PDC cutter for reinforced concrete based on linear and rotational cutting tests

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Studies on Bearing Characteristic of Open-Ended and Close-Ended Pipe Piles under High-Speed Railway Loadings