Abstract:Optimal design of tuned mass damper (TMD) parameters should be implemented before device installation to achieve the desired vibration reduction effects for tall and quite slender buildings. Although various optimization algorithms have been developed for searching TMD parameters, there has been very limited exploration of machine learning-based optimization approach in this domain. In this paper, two machine learning-based algorithms are proposed to optimize the natural frequency and damping ratio of a TMD device for seismically excited building. The first algorithm investigates the single-objective optimization of a TMD parameters on a linear building structure. It is based on physics-enhanced generative and adversarial network (GAN) architecture. A generative network randomly generates the primary TMD parameters within the specified parameter ranges, while an adversarial network guides the evolution of parameters to acquire updated parameters, a physical evaluation network assesses the performance of the updated and primary parameters, subsequently providing training data for both the generated network and adversarial network. Furthermore, a second physics-enhanced machine learning algorithm is proposed for the multi-objective optimization of a TMD parameters on a nonlinear building structure under various seismic excitations. The physical evaluation network is extended to consider multiple objective functions, in which the multiple objective functions are integrated through a kind of decomposition scheme, i.e., weighted sum approach. Then, a better set of parameters can be determined and a Pareto optimal solution is obtained. To verify the effectiveness of the two proposed algorithms, single-objective optimization of a TMD parameters for a linear shear-type structure under seismic excitation and a multiple-objectives optimization of a TMD parameters for a seismically excited nonlinear moment-resisting frame (MRF) are conducted and the optimizations are validated by comparing with those by the conventional particle swarm optimization (PSO) approach.

Research on location optimization of energy dissipation braces between columns of long-span hangar based on improved genetic algorithm

A Method for Identification of Short Hanger Tension Considering Damper

Tuned Mass Damper Parameters Design for Structural Systems Via Linear Matrix Inequality and Genetic Algorithm

Identification method for tensile force in hanger of arch bridges with damper and its application

Research on Location Optimization of Seismic Reduction Device Based on Improved Genetic Algorithm

The Quantity Optimization and Optimal Placement of Energy Absorbing Dampers for Wind-Induced Vibration Reduction of Space Reticulated Structures

The mixed algorithm for placement and quantity optimization of dampers in vibration reduction of spatial reticulated structures

Proper Placement and Reasonable Quantity of MR Dampers for Reduction of Wind Induced Vibration in Spatial Reticulated Structures

Analysis and optimization of seismic performance of high-rise residential building

Optimizing Damper Connectors for Adjacent Buildings

Optimization Design of Coupling Beam Metal Damper in Shear Wall Structures

Hybrid Genetic Algorithm for Optimizing Damper Distribution of Transmission Towers

Vibration Reduction Analyses of Beijing A380 Hangar Structure with Viscous Dampers

Evolutionary seismic design optimization of mega‐brace damper architectures in three‐dimensional structures

Study on the new viscoelastic damper based on bending and dislocating

Parametrized multi-objective seismic optimization for precast concrete frame with a novel post-tensioned energy dissipation beam-column joint

Integrated optimal wind‐resistant design of super‐tall structures with toggle‐brace damper systems

Physics-enhanced machine learning-based optimization of tuned mass damper parameters for seismically-excited buildings

Optimization of Placements and Parameters of Dampers for Reducing Dynamic Response of Structures

VIBRATION CONTROL OF SEISMIC RESPONSE FOR HIGH-TECH BUILDING FACILITIES

An integrated optimization method for the damper placements, shape and size of truss structures