Abstract:Low-field nuclear magnetic resonance (LF-NMR) was used to analyze the moisture migration characteristics and water distribution of instant Tremella fuciformis (ITF) during heat pump drying at 35 °C, 45 °C and 55 °C. A fuzzy mathematical evaluation method was then used to investigate the effect of heat pump drying temperatures (35 °C, 45 °C and 55 °C) on the quality of ITF. Based on the screened appropriate temperature of 45 °C, the thin layer heat pump drying curve and drying rate curve of ITF were drawn, then four mathematical models were tested based on the coefficient of determination (R2). The result showed three water components (bound water (T 21), immobilized water (T 22), and free water (T 23)) in ITF before drying. During the drying process, the heat pump drying of ITF was carried out gradually from the outer to the inner. The sensory total score (77.66 ± 6.57), rehydration ratio (4803.00 ± 90.00%), and viscosity (45.01 ± 3.61 Pa s) of ITF in heat pump drying at 45 °C were the best. The optimal drying temperature of 45 °C was obtained by the fuzzy comprehensive evaluation with the highest comprehensive score of 77.85%. With the prolongation of drying time, the water content of ITF showed a gradual decreasing trend, and the water content was controlled to below 8.51% after 6 h. The drying curve shows that the drying phase of the ITF is divided into three phases, including preheat, constant speed and deceleration. The drying speed first increases, remains constant in the middle and then decreases. Among the four models tested, the cubic regression equation aligned with the change rule of the ITF drying curve (R2 = 0.99397). By studying the effect of drying temperature on the moisture migration characteristics and the quality of ITF, we aim to provide more data support for the production of T. fuciformis.

Optimizing High Pressure Steaming Process for Instant Tremella Production by Response Surface Methodology

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

Optimization of Extraction Technology of Total Flavonoids from Toots of Chenopodium Glaucum (l.)using Response Surface Methology

Study and optimization of high hydrostatic pressure (HHP) to improve mass transfer and quality characteristics of candied green plums (Prunus mume)

Optimization of Apple Pomace Pectin Extraction by Steam Explosion Employing Response Surface Methodology

Optimization of membrane dispersion ethanol precipitation process with a set of temperature control improved equipment.

Improvement of soluble dietary fiber quality in Tremella fuciformis stem by steam explosion technology: An evaluation of structure and function

Process Optimization and Its Impacts on Physical Properties of Instant Rice

Constant temperature and humidity combined with vacuum-steam pulsed steaming of Polygonatum cyrtonema rhizome: Quality attribute and browning mechanism

Pressure-controlled steam explosion as pretreatment for efficient extraction of Tremella fuciformis polysaccharide: Structure and bioactivity

Optimization on Treatment by Ultra-High-pressure to Wheat Bran and Its Microstructure Observation with SEM

Steam-explosion-modified Optimization of Soluble Dietary Fiber Extraction from Apple Pomace Using Response Surface Methodology

Control the Effects Caused by Noise Parameter Fluctuations to Improve Pharmaceutical Process Robustness: A Case Study of Design Space Development for an Ethanol Precipitation Process

Unit Operation Optimization for the Manufacturing of Botanical Injections Using a Design Space Approach: a Case Study of Water Precipitation.

Optimization of a variable-temperature heat pump drying process of shiitake mushrooms using response surface methodology

Optimisation Of A Quality Improver For Instant Rice And Its Quality Properties

Processing technology optimization for tofu curded by fermented yellow whey using response surface methodology

Mild steam treatment: Enhancing the rehydration performance of instant rice noodles by changing the physicochemical properties and gel structure of rice starch

Multiple responses optimization of instant dark tea production by submerged fermentation using response surface methodology

Optimization of the Submerged Fermentation Conditions of Ganoderma Lucidum with High Triterpenoids Production by Response Surface Analysis

Effect of heat pump drying temperature on moisture migration characteristics and quality of instant Tremella fuciformis