Abstract:The analysis of the vibration responses of a fruit is suggested to measure firmness non-destructively. A wooden ball excited the fruits and the response signals were captured using an accelerometer sensor. The method has been well studied and understood on ellipsoidal shaped fruit (watermelon). In this work, using the finite element simulations, the applicability of the method on watermelon was investigated. The firnmess index is dependent on the mass, density, and natural frequency of the lowest spherical modes (under free boundary conditions). This developed index extends the firmness estimation for fruits or vegetables from a spherical to an ellipsoidal shape. The mode of Finite element analysis (FEA) of watermelon was generated based on measured geometry, and it can be served as a theoretical reference for predicting the modal characteristics as a function of design parameters such as material, geometrical, and physical properties. It was found that there were four types of mode shapes. The 1(st) one was first-type longitudinal mode, the 2(nd) one was the second-type longitudinal mode, the 3(rd) one was breathing mode or pure compression mode, and the fourth was flexural or torsional mode shape. As suggested in many references, the First-type spherical vibration mode or oblate Prolate for watermelon is the lowest bending modes, it's most likely related to fruit firmness. Comparisons of finite element and experimental modal parameters show that both results were agreed in mode shape as well as natural frequencies. In order to measure the vibration signal of the mode, excitation and sensors should be placed on the watermelon surface far away from the nodal lines. The excitation and the response sensors should be in accordance with vibration directions The correlations between the natural frequency and firnmess was 0.856, natural frequency and Young's modulus was 0.800, and the natural frequency and stiffhess factor (SF) was 0.862. The stiffness factor (SF) is adequate expression for the Modulus of Elastic (MOE), and adopted in the evaluation of their firnmess.

A Preliminary Study of Helmholtz Resonant for Measurement of Watermelon Volume

Fruit Density As an Indicator for Watermelon Hollow Detection Using Helmholtz Resonance

Measurement of Sugar Content of Watermelon Using Near-Infrared Reflectance Spectroscopy in Comparison with Dielectric Property

Firmness Measurement of Kiwifruit Using a Self-Designed Device Based on Acoustic Vibration Technology

An Acoustic System for the Detection of the Hollow in Watermelon

Study on the Detection of the Hollow in Watermelon Based on Acoustic Characteristic

The Use of A Laser Doppler Vibrometer to Assess Watermelon Firmness

Determination of Acoustic Vibration in Watermelon by Finite Element Modeling

A new simple system for measuring volume changes in unsaturated soils

Application of Visible/Near-Infrared Spectroscopy Combined with Machine Vision Technique to Evaluate the Ripeness of Melons ( Cucumis melo L.)

Quality Evaluation Of Watermelon Using Its Vibration Characteristics And Dynamic Finite Element Analysis

Finite element models of watermelon and their applications

Improving accuracy of prediction model for soluble solids content of watermelon by variable selection based on near-infrared spectroscopy

A New Plant-Wearable Sap Flow Sensor Reveals the Dynamic Water Distribution During Watermelon Fruit Development

Chinese Quince (cydonia Oblonga Miller) Freshness Rapid Determination Method Using Surface Acoustic Wave Resonator Combined with Electronic Nose

Firmness Evaluation of Melon Using Its Vibration Characteristic and Finite Element Analysis

Nondestructive determination of watermelon flesh firmness by frequency response

The Detection of Watermelon Maturity with the Acoustic Properties of Watermelon

Studies on Vibration Characteristics of a Pear Using Finite Element Method

Acoustic detecting system for sugar content of watermelon

Measurement of internal quality of watermelon by Vis/NIR diffuse transmittance technique