Abstract:A line-based fiber optic sensor, modified from the loop-based configuration of the Sagnac interferometer using a Faraday rotator mirror (FRM), is easy to set the sensing fiber (SF) in the field application, especially in long-distance perimeter security. The sensor we proposed is composed of two line-based interferometers, which are multiplexed with super luminescent diode (SLD), interference unit (IU) and SF respectively through wavelength division multiplexer (WDM) to obtain different wavelength disturbance signals generated by the same disturbance. Two signals with fixed time delay, determined by the position of the disturbance and extracted by signal correlation method, are obtained. Then the position of disturbance can be calculated by it. Experiments show that low-frequency noise has a great impact on the positioning results, and even leads to the failure of positioning. In this work, the influence of disturbance frequency and sampling rate on the accuracy of calculation results is analyzed, and two new processing methods is proposed. Firstly, we use bandpass filtering to eliminate the effects of these factors. Disturbances at different locations require different filtering ranges. We propose a method to determine the filter range by null-frequency, which can achieve higher positioning accuracy. Secondly, the sampling rate of 0.5 MHz is raised to 2.5 MHz by using spline interpolation method. The combination of these two methods can achieve higher accuracy and better reliability of positioning results. Experiments results show that the positioning accuracy of this method can be improved from 200 m to 40 m with the total length of SF is 40 km.

Position determination of disturbance along a modified saganac interferometer

Modified Sagnac Interferometer For Distributed Disturbance Detection

Research Of Disturbance Detection Based On A Novel Double Sagnac Distributed Fiber-Optic Sensor

A Novel Linear Sagnac Interferometer in Position Determination of Perturbations

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

Dual-wavelength Michelson Interferometer Employing Time Delay Estimation for Distributed Disturbance Location

Demodulation Techniques for Position Determination System Based on Fiber Interferometer

Distributed Fiber Optics Disturbance Sensor Using a Dual-Sagnac Interferometer

Location of a Wideband Perturbation Using a Fiber Fox–Smith Interferometer

Improved Location Algorithm for High-spatial-resolution in Fiber Optic Line-based Sensor

An Asymmetrical Dual Sagnac Distributed Fiber Sensor for High Precision Localization Based on Time Delay Estimation

Distributed fiber optic sensor employing phase generate carrier for disturbance detection and location

Location Performance Fading for Multiple Disturbances in Distributed Sagnac Optical Fiber Interferometer

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Interferometric Distributed Fiber Optic Vibration Sensor with Branching Sensing Optical Path Based on Time Delay Estimation for Disturbance Localization

A 150 Km Distributed Fiber-Optic Disturbance Location Sensor With No Relay Based On The Dual-Sagnac Interferometer Employing Time Delay Estimation

Distributed fiber-optic sensing using double-loop Sagnac interferometer

Improved Localization Algorithm for Distributed Fiber-Optic Sensor Based on Merged Michelson-Sagnac Interferometer.

A Novel Sagnac Fiber Optic Sensor Employing Time Delay Estimation for Distributed Detection and Location

Disturbance Location and Pattern Recognition of a Distributed Optical Fiber Sensor Based on Dual-Michelson Interferometers.

Position Determination and Monitoring of Disturbance along Distributed Fiber Optic Sensors