Abstract:Metallic glass usually ruptures at a small strain by forming single dominant shear band under tension at room temperature. Experiments have shown that multiple shear bands can be induced in metallic glass film by a ductile metallic substrate, and the ductility of the film can be elevated significantly. However, the mechanism behind remains unsolved. Here we established a computational model to investigate the effect of a Ni substrate on the deformation of a Ni-P amorphous film. The shear band evolution in the film was described by a free volume-based constitutive theory, while the deformation of the Ni substrate was simulated by a dislocation density-based model. The film/substrate interface was modeled by a cohesive zone law. In the simulations, the shear band evolution and the stress in the film can be measured directly, which is difficult to achieve in experiments. Our simulations show that multiple shear bands have been formed in the substrate-supported metallic glass film if the film thickness h f is less than 10 mu m. The thinner the film is, the more the shear bands the film has. The number of shear bands can reach as high as 16 as h f is refined down to 2.5 mu m. The generation of the multiple shear bands alleviated the strong strain-softening as observed in free standing film, as clearly shown in the stress-strain response of the thin film in the film/substrate system. The suppressed strain-softening induces significantly enhanced tensile ductility in the amorphous film. The tensile ductility of the 2.5 mu m-thick film on the Ni substrate can reach as high as 13.3%, which is much higher than that of the corresponding freestanding film, i.e., 3.1%. The proposed computational model has been validated by the coincident stress-strain responses between simulations and experiments. The findings revealed that the enhanced tensile ductility originates from the shear band multiplication-induced strain delocalization in the amorphous film due to the constraint of the metallic substrate. (C) 2020 Elsevier Ltd. All rights reserved.

Deformation Behavior of Metallic Glass Thin Films

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Non-localized deformation in metallic alloys with amorphous structure

Rate-dependent Plastic Deformation of TiZrHfCuNiBe High Entropy Bulk Metallic Glass

Deformation Behavior of Fe-based Bulk Metallic Glass During Nanoindentation

Deformation Behavior of Metallic Glasses with Shear Band Like Atomic Structure: a Molecular Dynamics Study.

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Deformation Behavior of a Nanoporous Metallic Glass at Room Temperature

Influence of Thermal Treatments and Plastic Deformation on the Atomic Mobility in Zr50.7Cu28Ni9Al12.3 Bulk Metallic Glass

The Shear Band Controlled Deformation in Metallic Glass: A Perspective from Fracture

Stress-state-dependent deformation behavior in Ni-Nb metallic glassy film

Steady-State Serrated Deformation of Metallic Glass During Indentation

Uniform Tensile Elongation in Framed Submicron Metallic Glass Specimen in the Limit of Suppressed Shear Banding

Tensile ductility and necking of metallic glass

Study of mechanical deformation in bulk metallic glass through instrumented indentation

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Nanoindentation Creep Behavior of Cu–Zr Metallic Glass Films

Shear band multiplication induced strong strain delocalization and high tensile ductility in amorphous thin films by metallic substrates

Size Dependent Hidden Serration Behaviors of Shear Banding in Metallic Glass Thin Films

Atomic Simulations of Plastic Deformation Behavior of Cu50zr50 Metallic Glass