Abstract:There is a great deal of residual heat under 350 degrees C being released into environment, without being used efficiently. Compared to the Rankine cycle with water as its working substance, it is effective to utilize Organic Rankine Cycle (ORC) to recover these waste heats. In the threshold of this paper, a miniature ORC system is proposed, and maximum efficiency of the system is achieved by means of optimal working substance. Moreover, numerical simulation of the partial admission (epsilon=0.267) high rotational speed radial inflow turbine, which is the key unit in the system, is fulfilled. At the operating rotational speed of 60000 rpm and the proposed thermodynamic parameters, steady and unsteady flow field in the turbine are investigated with R11 as working fluid. The detailed parameters, such as axial force of rotor, power generated and thermal efficiency of the radial turbine, are analyzed. In addition, the unsteady flow pressure is integrated around the rotor blade profile to provide the unsteady aerodynamic blade force. And subsequently frequencies of unsteady disturbances and excitation force factors are obtained by spectrum analysis, which are of key importance for blade response analysis. The generation, development and dissipation process of the secondary flows, passage vortex and leakage vortex are observed in the flow channel. The results reveal that the partial admission greatly influences the parameters distributions in the flow field and the losses of radial turbine mainly occur at the frontier of the passage in the vicinity of blade root. As is discussed in the analysis of excitation force factor, the radial turbine is safe in the operation. The results discussed in this paper are beneficial for the sequent optimization and manufacture of the miniature turbine.

A Light-Driven Turbine-Like Micro-Rotor And Study On Its Light-To-Mechanical Power Conversion Efficiency

Laser-induced Rotary Micromotor with High Energy Conversion Efficiency

Rotation Motion of Designed Nano-Turbine.

Hydrodynamic Rotating Motion of Micromotors from Femtosecond Laser Microfabrication

A bubble-powered micro-rotor: conception, manufacturing, assembly, and characterization

Opto Propeller Effect on Micro–Rotors with Different Handedness*

Advantages of the Aerodynamic Performance of Micro‐tesla Turbines

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

An optical reaction micro-turbine

An experimental and theoretical evaluation of micro rotor MCF3225 in static conditions

High-performance Marangoni hydrogel rotors with asymmetric porosity and drag reduction profile

Opto Propeller Effect on Chiral Micro-Rotors

Study On The Steady And Unsteady Aerodynamic Performance Of A Radial Inflow Turbine With Small Partial Admission In A Miniature Orc System

Study on Performance of Contra-Rotating Small Hydro-Turbine with Thinner Blade and Longer Front Hub

Aerodynamic Design and Numerical Investigation on Overall Performance of A Micro Radial Turbine with Millimeter-Scale

Modeling and Analysis of A Micromotor with an Electrostatically Levitated Rotor

Numerical Investigation on the Flow and Heat Transfer for a Millimeter-Scale Rotor-Stator System with Ultrahigh Rotational Speed

Automated Electromagnetic Manipulation of Micron-Scale Rotors on Unstructured Surfaces in Low Reynolds Numbers

Design of Rotor System for Micro Turbine Jet Engine

The Energy Conversion Behind Micro-and Nanomotors

Design Optimization of a Rotary Thermomagnetic Motor for More Efficient Heat Energy Harvesting