Abstract:The need to operate an rf-gun-based electron photoinjector with a beam emitted away from the cathode center can occur under various circumstances. First, in some cases the cathode can be affected by ion back-bombardment that progressively reduces the quantum efficiency (QE) in its center, making off-axis operation mandatory; second, in some cases the drive laser intensity can be sufficiently high to generate QE depletion in the cathode area illuminated by the laser, forcing off-axis operation; last, in cathodes with nonuniform QE distribution it could be convenient to operate off axis to exploit a better QE. However, operation in this mode may lead to growth of the projected transverse beam emittances due to correlations between the transverse and longitudinal degrees of freedom that are introduced within the gun and downstream rf cavities. A strategy is described to mitigate this emittance growth by allowing the beam to propagate along a carefully tuned off-axis trajectory in downstream rf cavities to remove the time-dependent rf kicks introduced in the gun. Along this trajectory, short range wakefields do not degrade the emittance, and long range wakefields degrade the emittance for very high repetition rate only.

Photoinjector Beam Quality Improvement by Shaping the Wavefront of a Drive Laser with Oblique Incidence

Influence of laser oblique incidence on beam quality and optimization

Optimization of Proton Beam Quality by Obliquely Incident Laser Pre-Pulse

Adaptive Transverse Laser Shaping and Its Application in a Photocathode Gun

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Reduction Of Thermal Emittance By Using P-Polarized Laser At Oblique Incidence

Drive laser shaping and transport system for photocathode RF gun

Off-axis beam dynamics in rf-gun-based electron photoinjectors

Beam-Shaping Application in Laser Heat Processing

Simulation Study on the Emittance Compensation of Off-Axis Emitted Beam in Rf Photoinjector

Beam Shaping of Edge-Emitting Diode Lasers Using a Single Double-Axial Hyperboloidal Micro-Lens.

Beam Quality Improvement of Ionization Injected Electrons by Using Chirped Pulse in Wakefield Acceleration

Beam-shaping of Laser Diode Stack for Uniform Illumination by Cylindrical Micro-Lenses

Beam Emittance Investigation in High Brightness Injector Using Different Driver Laser Profiles

Thermal Birefringence-Based beam shaping in high energy lasers

Characterization and Correction of Multipole Field Effect on Electron Beams from a High-Brightness Continuous-Wave Photocathode Gun

Nonlinearly Shaped Pulses in Photoinjectors and Free-Electron Lasers

"Beam `a la carte": laser heater shaping for attosecond pulses in a multiplexed x-ray free-electron laser

Beam Quality Improvement by Intracavity Phase Modulation in Solid-state Laser

Beam Profile Improvement of a LD Array by an External Cavity with Photorefractive Phase Conjugate Mirror

Electron beam shaping via laser heater temporal shaping