Abstract:Three-dimensional computational grains based on the Trefftz method (TCGs) are developed to directly model the micromechanical behavior of heterogeneous materials with coated spherical inclusions. Each TCG is polyhedral in geometry and contains three phases: an inclusion, the surrounded coating (or interphase) and the matrix. By satisfying the 3D Navier's equations exactly, the internal displacement and stress fields within the TCGs are expressed in terms of the Papkovich-Neuber (P-N) solutions, in which spherical harmonics are employed to further express the P-N potentials. Further, the Wachspress coordinates are adopted to represent the polyhedral-surface displacements that are considered as nodal shape functions, in order to enforce the compatibility of deformations between two TCGs. Two techniques are developed to derive the local stiffness matrix of the TCGs: one is directly using the multi-field boundary variational principle (MFBVP) while the other is first applying the collocation technique for the continuity conditions within and among the grains and then employing a primal-field boundary variational principle (PFBVP). The local stress distributions at the interfaces between the 3 phases, as well as the effective homogenized material properties generated by the direct micromechanical simulations using the TCGs, are compared to other available analytical and numerical results in the literature, and good agreement is always obtained. The material and geometrical parameters of the coatings/interphases are varied to test their influence on the homogenized and localized responses of the heterogeneous media. Finally, the periodic boundary conditions are applied to the representative volume elements (RVEs) that contain one or more TCGs to model the heterogeneous materials directly.

Study on 3D von Neumann equation with anisotropy for convex grains

A Novel Approach to Grain Shape Factor in 3D Hexagonal Cellular Automaton

Grain Extraction and Microstructural Analysis Method for Two-Dimensional Poly and Quasicrystalline Solids

Monte Carlo Simulation of Three-Dimensional Polycrystalline Material

Revealing curvature and stochastic effects on grain growth kinetics: A thermodynamic perspective from the extremal principle

Modeling of grain growth under fully anisotropic grain boundary energy

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

A unified theory of grain growth in polycrystalline materials

A Three-Dimensional Continuum Simulation Method for Grain Boundary Motion Incorporating Dislocation Structure

A unified variational model for grain boundary dynamics incorporating microscopic structure

Why is Grain Growth Not Curvature Flow?

A triple junction energy study using an inclination-dependent anisotropic Monte Carlo Potts grain growth model

Grain Growth and the Effect of Different Time Scales

Phase-field simulations of grain boundary grooving under diffusive-convective conditions

THREE-DIMENSIONAL TREFFTZ COMPUTATIONAL GRAINS FOR THE MICROMECHANICAL MODELING OF HETEROGENEOUS MEDIA WITH COATED SPHERICAL INCLUSIONS

Statistics of grain microstructure evolution under anisotropic grain boundary energies and mobilities using threshold-dynamics

Modeling of Polycrystalline Material Microstructure with 3D Grain Boundary Based on Laguerre–Voronoi Tessellation

Comparing molecular dynamics simulations of grain growth with experimental data

A Study of Strain-Driven Nucleation and Extension of Deformed Grain: Phase Field Crystal and Continuum Modeling

Polycrystal plasticity with grain boundary evolution: A numerically efficient dislocation-based diffuse-interface model