Abstract:A dispersion-engineered silicon-germanium (Si0.8Ge0.2) waveguide is designed for mid-infrared (MIR) broadband or discrete-band wavelength conversion by using its advantages of high nonlinearity and tight mode-field confinement. The dispersion of this waveguide is engineered by optimizing the waveguide geometry. The zero-dispersion wavelength is tuned to about 2 mu m, and the dispersion curve is flattened to reduce the dispersion slope. In the MIR band, the 3 dB bandwidth for the four-wave mixing effect reaches 795 nm, and the peak conversion efficiency is -25.0 dB when the pump power is 500 mW, which can support the broadband all-optical wavelength conversion for next-generation MIR optical communications. Discrete-band wavelength conversion between the MIR (2.5-3.8 mu m) and telecommunication (1.30-1.72 mu m) bands is realized by using the pair of phase-matching wavelengths far away from the pump. Moreover, by choosing proper waveguide geometries, the signals in the band of 2.0-3.8 mu m can be efficiently converted to the idler with fixed wavelength of 1.55 mu m, which exhibits the potential to realize indirect detection by using telecommunication-band detectors to detect MIR signals. (C) 2018 Optical Society of America

Design of low-dispersion-discrepancy silicon waveguide for broadband polarization-independent wavelength conversion

Optimal Design of a Silicon-on-insulator Nanowire Waveguide for Broadband Wavelength Conversion

Design of Mid-Infrared Nonlinear Silicon–germanium Waveguides for Broadband/discrete-Band Wavelength Conversion

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

All-optical Wavelength Conversion for Telecommunication Mode-Division Multiplexing Signals in Integrated Silicon Waveguides.

Polarization-Independent Wavelength Conversion Using an Angled-Polarization Pump in A Silicon Nanowire Waveguide

Polarization-independent Photon Up-Conversion with a Single Lithium Niobate Waveguide

Optimal design of silicon-on-insulator nano-wire waveguides for broadband wavelength conversion

A Proposal for Broadband Polarization-Insensitive Wavelength Conversion Using a SOI Waveguide

Design of Silicon Photonic Wavelength Conversion Chip for Mode-division Multiplexing Signals

Broadband Wavelength Conversion for Mode-Division-Multiplexing Signals in a Width-Modulated Quasi-Phase-Matching Multimode Silicon Waveguide

Dispersion Engineering of a Silicon-Nanocrystal-based Slot Waveguide for Broadband Wavelength Conversion

Wavelength-Assignable 1310/1550 Nm Wavelength Conversion Using Completely Phase-Matched Two-Pump Four-Wave Mixing in A Silicon Waveguide

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Power-Attenuated Optimization for Four-Wave Mixing-Based Wavelength Conversion in Silicon Nanowire Waveguides

Uniform Polarization-Dispersion Compensation of All Channels in Highly Birefringent Silicon Nanowire-Based Arrayed Waveguide Grating

Dispersion Engineering of Suspended Silicon Photonic Waveguides for Broadband Mid-Infrared Wavelength Conversion

Polarization Dispersion Compensated Arrayed Waveguide Gratings Design Based on Silicon Nanowires

All-Optical Wavelength Converter For Pol-Mux Qpsk Signals Based On A Single Silicon Waveguide

Birefringence compensated silicon nanowire arrayed waveguide grating for CWDM optical interconnects.

Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide